|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $3.28 4% OFF
Manufacturer: Genebre
Brand: Genebre
Manufacturer: Genebre
Brand: Genebre
Pressure Gauge Dial Size 2 1/2" 1/4; Mnpt Lower Conn 0-150 W/Glycerine
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $3.80 4% OFF
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: P2008L
Manufacturer: Miljoco Corporation
Brand: Miljoco
Model: P2008L
This instrument provides value where economy is required and is ideal for general service on air, water, gases, and other light duty process fluids suitable for brass process connections. It features a steel case and is available in 2" dial size covering a broad spectrum of pressure ranges. Accuracy: +/-3-2-3 percent (ASME B40.100 Grade B). Process temperature: -40 to 150 degree F. Ambient temperature: -40 to 65 degree C. Bottom outlet. 3/4" NPT "G" Connection.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $4.10 3% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-308
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-308
These sensors are for use with Manometers, Magnehelic Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $5.60 3% OFF
Manufacturer: NEWPORT ELECTRONICS
Brand: Newport Electronics
Manufacturer: NEWPORT ELECTRONICS
Brand: Newport Electronics
Price for: Each 1 . For Use With:Omega RMJ Series Type K Miniature Connector.SVHC:To Be Advised
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $5.99 15% OFF
Manufacturer: E-Z Pack
Brand: WEP
Manufacturer: E-Z Pack
Brand: WEP
E-Z Pack Joystick miniature micro-switch, Garbage Truck.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $6.67 2% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
6" Static Probe Straight Sensor, Intregal Flange, Stainless Steel, Gasketed, 2 Self Tapping Screws Included
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $6.67 2% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Dwyer Instruments, Inc.,DWA489,DWA489,STATIC TIP 4" SS W/FLNG
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $7.10 2% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-101
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-101
Red Gage Fluid, .826 sp. gr., is the standard fluid for use in inclined manometers, "D" type vertical manometers and all Dwyer gages using red fluid.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $7.40 2% OFF
Manufacturer: Winters
Brand: Winters
Model: PEM201
Manufacturer: Winters
Brand: Winters
Model: PEM201
|
The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black-painted steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), and 4" (100 mm) diameters. The dial has an aluminum black pointer. The lens for the 1.5", 2", and 2.5"diameter dials is polycarbonate for high impact resistance. The lens for the 4" diameter dial is glass for strength and clarity. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT (National Pipe Thread) or 1/2" NPT rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a press...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $7.98 58% OFF
Manufacturer: Winters
Brand: Winters
Model: PEM1299
Manufacturer: Winters
Brand: Winters
Model: PEM1299
|
The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black-painted steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), and 4" (100 mm) diameters. The dial has an aluminum black pointer. The lens for the 1.5", 2", and 2.5"diameter dials is polycarbonate for high impact resistance. The lens for the 4" diameter dial is glass for strength and clarity. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT (National Pipe Thread) or 1/2" NPT rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a press...
|
|