Yeeco® Digital Multimeter AC 80-260V 100A Voltmeter Ammeter Voltage Amperage Power Energy Meter Volt Amp Tester Current Voltage Monitor LCD Digital Display Volts Amp Measuring with Transformer CT

A. Function:
1.Measurement of voltage, current, power and energy
2.overload alarm function(If active power is larger than threshold, backlight and power will flash)
3.Store energy data when power off(can be reset to 0)
4.Pre-seting the power alarm limitation
5.Backlight function

B. Test Range and Display format:
1.Power: test range: 0-22kW
Less than 1kW, display: 0.0-999.9W
More than 1kW, display: 1000-9999W
More than 10kW, display: 10.0-22.0kW

2.Energy: test range: 0-9999kWh
Less than 10KWh, display: 0-9999Wh
More than 10kWh, display: 10-9999kWh

3.Current: test range: 0-100A
Display: 0.00-99.99A

C. Specifications:
1. Working voltage: AC 80-260V
2. Test voltage: AC 80-260V
3. Rated power: 100A/22000W
4. Measurement accuracy: 1.0
5. Working frequency: 45-65Hz

D. Button control:
-Backlight control
Short press to turn on or turn off the light
-Energy cleared
1. Long press for 5s till the digits on the display flash and them loose the button;
2. Short press again, the energy data is cleaned and log out the mode.
3. Long press for 5s again till the digits do not flash which means that the energy data isnt cleaned and log out the mode.
-Power alarm settings
1.Do not stop long pressing until "SET CLr" appears in the power area and it means that you have gotten into the setting mode.
2.Power area shows the current alarm rate and digit flashes from the last digit. In this time, short press to add "1" in this place. The setting place for each digit will be change automatically after 3s without any operation.
3.Long press for more than 5s to save and log out after finishing the setting, power alarm setting range: 0.0-22.0kW

Package including:
1x DC Power Multimeter with Current Transformer Coil