Mudder 0.1 Readout Accuracy Digital Pocket Pen pH Meter/ Water Quality Tester with ATC (0~50℃), 0.0 - 14.0 pH Measurement Range (Red)

Mudder pH Meter is for testing your water level. The cap keeps the sensor moist when stored upright, and can be applied as a container for sensor-conditioning.

Calibration

Calibration buffer solution is needed
• Immerse the PH meter up to the maximum immersion level in ph 6.86 buffer solution
• Allow the reading to stabilize and using a small screwdriver adjust the calibration trimmer to read 6.86
• Use the distilled water clean the electrode, immerse the electrode in ph 4.01 or ph 9.18 the standard buffer solution of borax
• Calibration is now complete

Notes

The glass bulb of the electrode is fragile. Treat it carefully. Don't touch it by hard tools and fingers. Suck the water on it gently when cleaning
• Clean the electrode with distilled or ionized water every time before and after use
• How to store: after cleaning and drying electrode, replace the protective cap, and put it in packing box, so you can store it very well

Specifications

Measure Range: 0.0-14.0 pH
Resolution: 0. 1 pH
Accuracy:±0.1 pH
Automatic Temperature Compensation: 0-50℃/ 122℉
Button Battery:3X 1.5V AG-13 (included)
Product Dimensions: 14.9×2.8×2cm
Weight: 121g (G.W) 53g (N.G)

Package include


1 X Mudder meter
1 X Mudder Instruction
1 x Adjustment screwdriver
1 x Package