TTC "V" Blocks - Model: V.E.B.-5 Maximum Capacity Of Vee: 2-7/16" DIMENSIONS : 5 "x 3-1/8"

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2200-0903

Number of holes: 13 Tapped 1/4'' - 20 the material of the precision angle plate are: 20CrMnTi ( C:0.17-0.23; Si: 0.17-0.37; Mn:0.8-1.1; Cr: 1.00-1.30; Ti: 0.04-0.10)

Manufacturer: HHIP Brand: HHIP Model: 3402-0109

Widely used for fixture components. All face, ends and edges are finished square and parallel. The opening provides a convenient hand grip for handling. Square within 0.0005" per 6". Parallel within 0.00025" per 6".

Manufacturer: HHIP Brand: HHIP Model: 3402-0993

3.75 X 3 X 6" Magnetic V-block with switch| Precision ground finished working surfaces. | Ideal for scribing, grinding, measuring and machining round or irregular shape items. | On/Off switch. | Two-centered 90° Vees.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 181-901-10

V-block, magnetic, 1 in, 2 PC/set

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG02-0408

Finished from 6-16 micro inches •Nominal Tapping: 0.0001" to 0.0003" •5 holes tapped to 3/8-16 and others untapped •Precision ground on all sides •Squareness on all sides •Surface finish •Oversize to allow nominal ...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EG10-9011

Side slots for easy clamping Length: 1-3/8'' Width: 1-3/8'' Height: 1-3/16''

Manufacturer: Vee Blocks Brand: Vee Blocks Model: VB2.3/2/9-BLOCK_IT

Hardened and ground steel. All sides are ground square and parallel to each other. Works vertically only. 90 degree V's are ground central, parallel, and square with the ends. Matched in pairs.

Manufacturer: HHIP Brand: HHIP Model: 3402-0951

1.61 X 1.38 X 1.77" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2200-0901

Thickness: 1'' Number of holes: 13 Tapped 1/4'' - 20 the material of the precision angle plate are: 20CrMnTi ( C:0.17-0.23; Si: 0.17-0.37; Mn:0.8-1.1; Cr: 1.00-1.30; Ti: 0.04-0.10)