AccusizeTools - 58 pcs Deluxe Steel Clamping Kits, Table Slot 5/8", Stud Size 1/2"-13, #4230-2626

Manufacturer: ABS Import Tools Inc. Brand: HHIP Model: 3402-0981

1-5/16" Toolmaker's V-blocks & clamps. | Blocks have four 3/8"-26 tapped holes, two in the base and one on each side for attachment to an angle iron. The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chu...

Manufacturer: Flexbar Brand: Flexbar

Precision V-Blocks and Clamps. All sides are ground Square and Parallel to each other. Matched Accuracy .0002" and numbered in pairs. Sturdy enough to be used in matching operation. supplied With two Clamps. Model No. 11088, Precision Precision V-Blo...

Manufacturer: HHIP Brand: HHIP Model: 3402-0954

2.50 X 1.73 X 2.76" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.

Manufacturer: HHIP Brand: HHIP Model: 3402-0402

Solid, one piece angle plate is made from hardened steel Square and parallel within 0.0002". Furnished with (13)1/4"-20 tapped holes.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2200-0904

Thickness: 1-1/4'' Number of holes: 13 Tapped 1/4''-2 the material of the precision angle plate 20CrMnTi ( C:0.17-0.23; Si: 0.17-0.37; Mn:0.8-1.1; Cr: 1.00-1.30; Ti: 0.04-0.10)

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 0532-4819x5

Table Slot T: 11/16"; Slot Height: 7/16", Overall Height: 3/4"

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 5095-0032

Manufacturer: ezMachineTools Brand: ezMachineTools

The ultra precision one hole pair has 0.0001 inch per inch accuracy with squareness. The drilled size is .500 - .501 inch. It is HRC 58-60 hardened and 1 inch x 2 inch x 3 inch dimension-wise. It is ideal for precision grinding, layout, etc.

Manufacturer: ezMachineTools Brand: ezMachineTools

This magnetic v-block has size of 2-3/8"x2-7/8"x4-3/4" ideal for holding round and irregular shapes for scribing, grinding, measuring and matching. It comes in fine precision ground finish and with lever operated on/off switch.