Mitutoyo 523-144 Snap Meter, 75-100mm Range, 2mm Anvil Movement, 8mm Gauge Stem Diameter, 5-10N Measuring Force

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-550-000-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatabi...

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. •Model AR •Type: A (2 round buttons top and bottom) •Frame No. 8 •Range: 3 3/4 - 4 1/2 M...

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model AR, Type: A (2 round buttons top and bottom). Frame No. 5, Range: 2 - 2 1/2

Manufacturer: INSIZE Brand: INSIZE Model: 2187-57

Adjustable snap gage, 2.01-2.24".

Manufacturer: INSIZE Brand: INSIZE Model: 2164-25A

Electronic 3-purpose snap gage, 0-1"/0-2.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-162

The Mitutoyo 201 series dial snap gauge is sized in inch units for Go/No Go (Go/NG) inspection of diameters of cylinders and shafts, to verify the workpiece is within tolerance limits. It can be fitted with a dial indicator that has a 3/8” stem...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 523-124

Indication repeatability: 0.4µm / .00002", Dial reading: 0.001mm or .00005", Flatness: 0.3µm / .000012", Parallelism: 0.6µm / .000024" for models up to 50mm / 2" 1µm / .00004" for models over 50mm / 2", Measuring force: 5 - 10N (500 - 100...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-103

Recommended dial indicator (optional): 2046SB (0.01mm reading), 2109SB-10 (0.001mm reading); Gauge stem diameter: 8mm; Measuring force: 15N +/- 3N; Parallelism: 5 micrometer or less; Anvil flatness: 0.00004" / 1 micrometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-102

Recommended dial indicator (optional): 2046SB (0.01mm reading), 2109SB-10 (0.001mm reading); Gauge stem diameter: 8mm; Measuring force: 15N +/- 3N; Parallelism: 5 micrometer or less; Anvil flatness: 0.00004" / 1 micrometer.