TCJ-II Painting Film Impactor Elastic Impact Tester Coatings Impact Resistance Shock Tester ASTM and ISO standard

Description
Impact test for various types of coatings on metal substrates.
according to ISO and ASTM Standard, using the clamping device, the test board is clamped on the die seat, so that the surface of the coating is outside the test area.
Will not be affected by the rapid deformation of the falling weight.
- anodized and metric scales with catheter
- tube body with a slit, the center of pipe can guide the cylindrical punch down
A ring can be adjusted up and reset the whereabouts of punch

Operation steps
The samples are put in the punch and fixed
The punch to the default height and fall
Visual or magnifying glass to observe the damage of samples
To adjust the drop weight and height of the impact tester, to get the exact point of failure or to set the standard of qualified / unqualified.
The calculation formula of impact strength is as follows:
Drop height * punch weight = impact force

Technical Datas
Model: TCJ-II 
ISO punch:Punch diameter 20mm, with handle, 1kg added mass:1kg, can be connected with the ISO punch
ISO module:Inside diameter 27mm
ASTM punch:Punch diameter 15.9mm, with handle, 2lbs added mass:2lbs, can be connected with the ASTM punch
ASTM module:Inside diameter 16.3mm
Depth control loop:1mm, 2mm, 4mm, 5mm each one
Dimension: 300*240*1400mm
Weight: 20kg

Note
All products have been checked and packaged in good condition before shipping.
After your order is confirmed,the product will be sent to your hands for 7-13 workdays.
If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.