Tru-Center Expanding Transfer Punch Set

Manufacturer: TTC Brand: TTC

Manufacturer: Starrett Brand: Starrett Model: 278

'V-Blocks and Clamp Set, Rectangular, Steel, Capacity 1 In., 2 Holes, Length 1 5/8 In., Width 1 1/4 In., Height 1 1/4 In., Includes 2 V-Blocks, 2 Clamps'

Manufacturer: Vee Blocks Brand: Vee Blocks

Hardened and ground steel. All sides are ground square and parallel to each other. Works vertically only. 90 degree V's are ground central, parallel, and square with the ends. Matched in pairs.

Manufacturer: HHIP Brand: HHIP Model: 3402-0953

1.77 X 1.61 X 2.76" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.

Manufacturer: HHIP Brand: HHIP Model: 3402-1017

3 X 1.4 X 1.2" Steel V-Block set with 1.25" Vee capacity | Guaranteed square and parallel within .00016". | All surfaces are hardened & ground. | 90° Vee blocks.

Manufacturer: HHIP Brand: HHIP Model: 3402-0323

Made of high grade cast iron fully stress relieved. Many more clamping positions available than an ordinary angle plate. All clamping faces are accurately machined.

Manufacturer: Starrett Brand: Starrett Model: 568C

3/8-16 tapped holes permit mounting blocks on faceplates or angle irons. Each block is 2-1/2" Length x 3" Width x 2" Height.

Manufacturer: ezMachineTools Brand: ezMachineTools

This precision 0-60º angle block has dimension of 4"x1-13/16"x1-3/16", angle of vee 90º, HCR 50-55, squareness of .0004"/0.01mm, angle vee of 90º and 0-60º adjustable angle by locking hex screw on the bottom.

Manufacturer: ezMachineTools Brand: ezMachineTools

This 90 degree V Block pair is 2-3/8 inch x 2-3/8 inch x 2 inch. It is made of high quality tool steel and completely hardened and ground. Square, parallelism, and center are all within 0.0002 inch. There are also side slots for easy clamping.