PICcircuit iCP12 - USBStick [PIC18F2550 Board with USB Oscilloscope, PC DAQ, Data Logger]

usbStick is a mini size 28 pin USB PIC IO board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period.

Peripheral Features:
• 13x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
• Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
• Maximum Voltage: 5Vdc
• 100mA current output at VDD pin with over-current protection
• 20MHz oscillator
• Green LED - power on indicator
• 2x LEDs (Green, Red) - status indicator
• ICSP Connector - on-board PIC programming
• Switch Mode Selection - Boot or Normal mode

SmartDAQ v1.3 Features:
• Sampling channel: 6x Analogs (10 bits ADC) + 7x Digitals (Input/Output)
• Maximum Sampling rate: 1KHz or 1mSec/Samples
• Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
• Sampling period:
• mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
• Sec: 1, 2, 5, 10, 20, 30
• Min: 1, 2, 5, 10, 20, 30, 60
• Trigger Mode: Larger [>], Smaller [<], Positive edge [↑], Negative edge [↓]
• Sampling Mode: Continuous, Single
• Logging Function:
• Save Format: Text, Graphic, Both
• Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
• End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)

Accessories List:
• 28 Pin PIC: PIC18F2550
• Preloaded Firmware: HID Bootloader + iCP12 DAQv1.2 Firmware
• iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
• NO programmer is required!