Hanna Instruments HI 726 Checker HC Handheld Colorimeter, For Nickel High Range

HI726 is portable meter for Nickel and is extensively used in electroplating, the manufacturing of steel, electronic devices, ceramics and colored glasses. It plays a vital role in many processes of applied sciences and fundamental sciences. It necessitates development of rapid methods for estimation of nickel. The HI 726 Checker HC is extremely simple to use. First, zero the instrument with your water sample. Next, add the reagent, shake gently until complete dissolution. Last, place the vial into the Checker HC, press the operational button for about 3 seconds. The display will show the countdown prior to the measurement or, alternatively, wait for 1 minute and press operational button. When the timer ends the meter will perform the reading and display concentration in g/L of nickel. It’s that easy. Dedicated to a single parameter. Designed to work with HANNA’s powder reagents. Uses 10 mL glass cuvettes. Small size, big convenience. Weighing a mere 64 g (2.25 oz.), the Checker HC easily. Fits into the palm of your hand or pocket. Use for quick and accurate on the spot analysis. One button operation: zero and measure. Operated by a single AAA battery. Ideal for: Steel manufacturing, electroplating and electronics production. Range: 0.00 to 7.00 g/L. Resolution: 0.01 g/L. Accuracy at 25 degree C: +/-0.10 g/L +/-5% of reading. Light Source: LED at 575 nm. Light Detector: silicon photocell. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95% non-condensing. Battery Type: (1) 1.5V AAA. Auto-off: after three minutes of non-use and ten seconds after reading. Dimensions: 81.5mm x 61mm x 37.5mm (3.2" x 2.4" x 1.5"). Method: adaptation of the photometric method.