Mark-10 WT3-201M Wire Crimp Pull Tester, 200 lbF; 230 VAC

The WT3-201M motorized wire crimp pull tester can perform all your wire testing needs without the bulky lab set up or tiresome manual tester. The compact size easily fits on a bench and still has all the features of a full-sized motorized force testing station - you get the best of both worlds! This pull tester features automatic start upon loading and auto-reverse, output, data storage, and zeroing upon sample break to increase testing efficiency. Output the results using USB, RS-232, Mitutoyo (Digimatic), or analog outputs. The 2000 data point memory includes statistics for each sample - time and date stamp for each point is optional (order separately). Data may be transferred to PC using the MESURTM Lite data acquisition software (included) for single or multipoint table generation, or used to transfer results to a spreadsheet for further analysis. The included wire crimp fixture has multiple slots, varying in size, to hold the most common crimp styles and wire gauge sizes AWG 30 to AWG 3 (0.01" to 0.25" or 0.25 to 6.3 mm). Optional fixtures include a ring-style crimp fixture for pin diameters of 1/8" to 3/8" (3.2 to 9.5 mm), or a blank fixture to be machined by the user for special applications or crimp styles. Samples should be at least 6.5" (165 mm) in length. Add-on features include being able to perform nondestructive tests such as pulling to a specified load or holding a load for a specified amount of time per UL 486A/B, saving and recalling up to 500 profiles for user-defined test procedures, and a time-and-date stamp added to each data point. These features are temporarily enabled in the tester for 160 hours of demo use; you can purchase features at the same time as tester or at a later date. What's Included: MESURTM Lite data acquisition software, USB cable, power cord, and NIST-traceable calibration certificate provided by the manufacturer. Motorized for reliable and repeatable test results Measure real-time and peak pull-off force up to 20