Meba Digital Thickness Gauge ,Measuring Tool 0.01mm

Main Technical Parameters:
●Measuring Range: 0-10mm/0-0.4inch
●Resolution: 0.01mm/0.0005inch
●Accuracy: 0.03mm/0.0012inch
●Throat: 60mm
●Battery; 3V enviromental Lithium battery (CR2032)

Usage
● Depress the lever, therefore separate the upper and lower measuring heads, and wipe them clean.
●Press the power key, therefore the power is on, and check whether the indicator works well.
●When the upper and lower measuring heads are closed, check whether the indicator displays zero, if not, press ther zero key and set zero.
●Depress the lever, therefore separate ther upper measuring head in enough distance form the lower measuring head. Put flat the measured workpiece on the lower measuring head, and release the lever, therefore the upper measuring head contacts well with the measured workpiece, then read the measuring result on the indicator.
●If readout in metric/inch different measurement system is required, press the mm/inch key.

Battery Installation
Pull the battery clasp, replace the old battery, and put new into the battery clasp according to the identifier in the clasp.
Notes
● Digital tube thickness gauge is a precision measuring tool, therefore when using, prevent from shock, drop, to avoid loss of precision.
●Keep it clean, and avoid the penetration of liquid, such as water, which will influence the normal use.
● Do not apply voltage on any part of the digital thickness gauge, do not engrave letters so as to avoid damage on the electronic circuit.
●If don't use for long time, remove the battery.