OMRON H7GP-C Total Counter (100 to 240VAC)(6-digit)(Light gray) NN

Ratings
[Item]6-digit total counter
[Front Cover]Light gray
[Rated supply voltage]100 to 240 VAC(50/60 Hz)
[External power supply]50 mA at 12 VDC
[Operating voltage range]85% to 110% of rated supply voltage
[Power consumption]100 to 240 VAC: 6.5 VA max.
12 to 24 VDC: 0.6 W max.
[Dimensions]48 x 24 x 80 mm(W x H x D)
[Mounting method]Flush mounting
[External connections]Screw terminals
[Display]7-segment,negative transmissive LCD(with red backlight)
[Digits]6 digits(8.5-mm-high characters)
[Input mode]Up(increment)
[Input]
Input signals Count,reset,and key protection *1
Input method No-voltage input(NPN transistor input)or voltage input(PNP transistorinput)(selected via DIP switch)
Count,reset,start No-voltage input(NPN transistor input)
Short-circuit(ON)impedance: 1 k Ohm max.
Short-circuit(ON)residual voltage:2 VDC max.
Open(OFF)impedance: 100 k Ohm min.
Voltage input(PNP transistor input)
Short-circuit(ON)impedance: 1 k Ohm max.
ON voltage: 9 to 24 VDC
OFF voltage: 5 VDC max.
Open(OFF)impedance: 100 k Ohm max.
Key protection No-voltage input(NPN transistor input)
Short-circuit(ON)impedance: 1 k Ohm max.
Short-circuit(ON)residual voltage:0.5 VDC max.
Open(OFF)impedance: 100 k Ohm min.
[Weight]Approx. 75 g
*1. Only a non-voltage input(NPN transistor)is possible for the key protectioninput.
The key protection input will be a non-voltage input even if the NPN/PNPinput mode is set to PNP.
Key protection is used to prohibit operating the Reset Key.
The reset input terminals will still be functional.