Hioki 3664 Optical Power Meter

Highly versatile optical power meter for production lines, R and D and maintenance Compensation function for the laser light source testing Dual power system Fully remote operation via USB interface Optical power measurement W, dBm Range setting auto (manual setting available). Accuracy +/-0.7 percent (+/-5 percent in combination with the optional sensor). Wavelength sensitivity compensation can be set for every 1nm. Automatic compensation for the sensor’s sensitivity. Max. 10 Wavelengths preset (including initial value for a sensor). Scaling can be set for each wavelength. Relative measurement display the relative value to the measured value or set value. (Displayed value = measured value - reference value) reference value can be set from the measured value or manual input. Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm). Display 4-1/2 digit, (19999 max.), display resolution: 0.01dBm / 0.01dB. Measurement display unit nW, mW, mW, dBm, dB. Wavelength display 4 digit, unit: nm. Display update rate 330ms approx. Max/min display maximum and minimum value display while measurement. Average display the moving average value. Averaging times: 2 to 100. Analog output 1v approx. When the sensor calibration point input. Output resistance 50W. Output connector 3.5 mini jack. Interface output measurement value and remote control. Auxiliary functions auto power save, setting backup, battery check. Safety EN61010-1: 2001 pollution degree 2. Power supply AA (LR6) x 4, AC adapter (9445-02). Max. rated power 1.6VA. Continuous battery operation 60 hours approx. (continuous use with the 9742 at calibration point input). Measures 85mm width by 160mm height by 35mm depth.