NF816 Underground Cable Wire Locator Tracker Network Cable Tester Lan with Earphone

DESCRIPTION:

1.The unit consists of a transmitter,model NF-816,is equipped with a thumb wheel switch for turning the unit on and adjusting the output level on the front of the unit for use with the large alligator clip leads.Push the switch to select to test Cable Scan or Battery Test
2.The transmitter is constructed of high impact plastic and is powered by one 9V battery.The receiver, model 816R, is equipped with a thumb wheel switch for turning the unit on and adjusting the receiver gain.The tracking antenna is attached to the receiver with a 3-foot long cable.Also is equipped with a White LED light and a external earphone,The receiver has been designed to filter AC power related noise.The receiver is constructed of high impact plastic and is powered by one 9V battery.
3.The alligator clip leads are available to connect the transmitter to electrical wire, CATV coax, telephone drops,irrigation control wires.
4.This locating system is packaged in a toolkit& box with extra batteries,external earphone and has operating instructions in the behind of the toolkit.

SPECIFICATIONS

Electrical
Output Voltage (open circuit):9Vp-p
Output Frequency (nominal):
Carrier: 447.5KHz
Audio Modulation:900Hz
Battery: 9 Vdc(not include)
Physical
Measurements
816T: 49x135x33 mm (1.93x5.31x1.3)
816R:43x168x27 mm (1.69x6.61x1.06)
Kit: 150x286x52 mm (5.91x11.26x2.05)
Weight
816T:124 g (4 oz)
816R:148 g (5 oz)
Kit:0.420 kg (15 oz)
Operating/ Storage Conditions
Operating Temperature:
Celsius:-10 C t o 5 0C
Fahrenheit:14 F t o 1 22 F
Storage Temperature:
Celsius:-17 C t o 7 5 C
Fahrenheit:0 F t o 1 67 F

PACKAGE:

1 x Emitter
1 X Receiver
1 x Earphone
1 x Kit bag
1 x Instruction Manual