OMRON G9SX-BC202-RC Basic Unit (Spring-cage terminals) NN

[Model]G9SX-BC202-RC
[Rated voltage]24 VDC
[Terminal block type]Spring-cage terminals
[Weight]Approx. 125 g

Power input
[Rated supply voltage]24 VDC
[Operating voltage range]-15% to 10% of rated supply voltage
[Rated power consumption *]3 W max.
* Power consumption of loads not included.

Inputs
[Safety input][Feedback/reset input]
Operating voltage: 20.4 VDC to 26.4 VDC,internal impedance: approx. 2.8 k Ohm *
* Provide a current equal to or higher than that of the minimum applicable load of the connected input control device.

Outputs
[Instantaneous safety output OFF-delayed safety output *1]
P channel MOS-FET output
Load current:
0.8 A DC max./output *2 *3
[Auxiliary output]
PNP transistor output
Load current: 100 mA max./output

*1. While safety outputs are in the ON state,the following signal sequenceis output continuously for diagnosis.
When using the safety outputs as inputsignals to control devices(i.e. Programmable Controllers),consider theOFF pulse shown below.
*2. The following derating is required when Units are mounted side-by-side.
0.4 A max. load current/output
*3. A load current below 1 A DC/output can be used when the following outputs are used.
1 output