OMRON H3YN-2 AC100/120V Solid-state Timer (Short-time range model)(0.1s to 10min)(DPDT)(AC) NN

[Model]Short-time range model(0.1 s to 10 min)
[Time-limit contact]DPDT
[Supply voltage]100 to 120 VAC
Note: 1. Sockets and Hold-down Clips are not included with the H3YN.Theymust be ordered separately.
2. Only models with 24-VDC power supply are available.

Ratings
[Item]H3YN-2
[Time ranges]0.1 s to 10 min(1 s,10 s,1 min,or 10 min max. selectable)
[Rated supply voltage *4 *5]100 to 120 VAC*1
[Pin type]Plug-in
[Operating mode]On-delay,interval,flicker OFF start(selectable withDIP switch)
[Operating voltage range]85% to 110% of rated supply voltage(12 VDC: 90%to 110% of rated supply voltage)*2
[Reset voltage]10% min. of rated supply voltage *3
[Power consumption]100 to 120 VAC:
Relay ON: Approx. 1.8 VA(1.6 W)at 120 VAC,60 Hz
Relay OFF: Approx. 1 VA(0.6 W)at 120 VAC,60 Hz
[Control outputs]
5 A at 250 VAC,resistive load(cos phi = 1)
The minimum applicable load is 1 mA at 5 VDC(P reference value).
Contact materials: Ag
*1. Do not use the output from an inverter as the power supply.
Refer to Safety Precautions for All Times for details.
*2. When using the H3YN continuously in any place where the ambient temperatureisin a range of 45 deg.(C)to 50 deg.(C),
supply 90% to 110% of the rated supply voltages(supply 95% to 110% with12 VDC type).
*3. Set the reset voltage as follows to ensure proper resetting.
100 to 120 VAC: 10 VAC max.
200 to 230 VAC: 20 VAC max.
100 to 110 VDC: 10 VDC max.
*4. Refer to Safety Precautions for All Timers when combining the Timerwithan AC 2-wire proximity sensor.
*5. A diode to prevent reverse voltages is provided only on models withaDC power supply.