Network & Cable Testers - Page 13

Manufacturer: Shenzhen Noyafa Electronic Brand: NOYAFA Model: NF-388B

1. Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables. 2. Check wiring error in 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection. 3. Locate the wiring or connection error. 4. Measure cable length and determine the distance of breakage point. 5. Automatically time-delay shut off and backlight display function. 6. Single board computer software watchdog design and reliable operation. 7. Verify RJ45 and BNC conductors. 8. With 8 remote identifiers , more easy to work.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: VERSIV-TSET

VERSIV HEADPHONES

Manufacturer: Fluke Networks Brand: Fluke Networks Model: P3218442

Fluke Networks P3218442 Line Cord with 471A Plug to Alligator Clips

Manufacturer: SainSonic Brand: SainSonic Model: 25mw+ OP-600

SainSonic WattsOut OP-600 miniature handheld optical power meter is for installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design. Features * Wavelength(nm): 800nm to 1700nm * High sensitivity, big dynamic range * Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface * Miniature chassis protection design, compact and easy, prevent accident drop damage instrument detectors. * Rapid response, no preheating * Low voltage function display * The automatic shutdown function can be chosen * Automatically shut off the backlight function can be chosen * New user auto-calibration function * Logarithm power (dBm) and linear power (xW) measurement * Larger screen and LED backlit The 25mW visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specifications * Wavelength: 650nm ± 20nm * Output Power: >20mW * Dynamic Distance: >20km * Connector: 2.5mm Universal connector * Packaging Size: 210*73*30 * Weight: 230g * Power Supply: AA * 2 * Operating Temperature: -10 - +50 °C, < 90%RH * Storage Temperature: 20 - +60 °C, < 90%RH Package Content 1 x 25mW Pen-type Visual Fault Finder 1 x Carrying Bag 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual 　

Manufacturer: Monoprice Brand: Monoprice Model: 108136 Color: Orange

The Monoprice Lineman's Test Set is a professional piece of equipment designed for telephone installers, repair technicians, and phone system maintenance personnel. This durable, line-powered device is full of features for testing existing and newly installed communications systems for proper functionality. The tester has a three-position volume switch, which can provide up to 12 dB of volume gain. The ring mode can be set to send either DTMF tones or rotary dial pulses. A three-position mode switch allows the tester to be set to Monitor, Ring, or Talk modes: The Monitor mode provides a high-impedance coupling to the telephone line, allowing it to be monitored without interfering with existing conversations, data transmissions, or signaling. The Ring mode allows the tester to be on-hook with an electronic ringer connected to the telephone line. This provides a low-impedance coupling to the telephone line for monitoring of optional line identification tones. The handset includes an automatic last-number redial function, which is capable of repeating up to 31 digits. It also features a number memory storage capability, allowing the technician to store up to 10 different numbers of up to 15 digits each, including the insertion of 3-second pauses for use with trunk lines. A pre-installed CR2032 lithium battery maintains the stored number memory and can be easily replaced by removing two screws and opening the handset.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: TS23-A-09

The Fluke Networks TS23 Pro telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; indicates line voltage and current; has a two-way, adjustable-volume speakerphone for hands-free conversation during testing of telephone lines; monitors lines without disrupting service; and stores up to nine 23-digit telephone numbers which can be speed-dialed via the keypad. It provides tone or pulse operation. The test set has two basic modes of operation: talk mode for off-hook operations including verifying dialing and receiving calls, and monitor mode for on-hook operations including checking for an idle line, listening for line noise, and measuring DC voltage on the line. In monitor mode, the test set provides a high impedance coupling to monitor lines without disrupting service. This test set meets IEC (International Electrotechnical Commission) safety standard 61010-1:2010 and is rated for CAT I installations to 300VDC, which covers equipment on circuits not directly connected to mains. It passes a 20' (6m) drop test and is Ingress Protection certified IP64 for protection against dust and splashed water. The high-visibility glow-in-the-dark keypad has 12 standard dialing keys including star and pound, and function keys to store, recall, and redial numbers and to pause for accessing a second dial tone when dialing through a PBX (private branch exchange), among other functions. It has six dual-color LEDs that indicate talk mode, polarity, mute, voltage (VDC), current (mA), and battery status. The voltage LED indicates five different levels of voltage and an alarm sounds to indicate voltage greater than 140VDC. The current indicator flashes red for less than 23mA and flashes green for greater than or equal to 23mA. The test set can be programmed to turn off automatically after one to 60 minutes (default setting is two minutes) of inactivity to conserve battery life, and is made of high-impact plastic. A spring-loaded belt clip ...

Manufacturer: CIRCUIT TEST Brand: CIRCUIT TEST

This Hand-Held Troubleshooting Tool Is Designed For Checking Continuity On The Conductors In An Hdmi Cable. Both Main And Remote Unit Show Signal Status.

Manufacturer: Black Box Brand: Black Box Model: FOCC

Ensures dust isn't attracted to fiber after cleaning.. This product includes: (1) Fiber connector cleaner (housing with cassette installed) (1) Nylon zipper case, black NOTE: Complete fiber optic cleaning kits are also available. See "Accessories" tab.

Manufacturer: Richway Tools & Supply Brand: Richway Tools & Supply

Continuity Test Phones- Pink Camouflage Continuity Test Phones All Electricians, Instrument Techs, Automotive Techs, Maintenance workers, etc, should have our high quality, professionally made continuity test phones in your tool bag! 9V battery and carrying bag included! Features: Soldered joints High quality parts and craftsmanship 9v battery included Shop Velcro to hold battery Nice carrying bag included Multiple color choices Velcro straps to secure wire leads On/off switch Bright LED indicator light 1 year warranty Extended warranty available Customer support ***DO NOT USE ON LIVE CIRCUITS*** IF YOU ARE ORDERING OUTSIDE OF THE U.S.A, PLEASE CALL BEFORE PLACING ORDERS

Manufacturer: SainSonic Brand: SainSonic

Overview The 10mW (10-12KM)visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Features * 2.5mm universal connector * Operates either in CW or Pulsed * Constant output power * Lower Battery warning * Long battery life (up to 60 hours) * Crash-proof and dust-proof design for laser head * Laser case ground design prevents ESD damage * Burning testing to ensure the reliability. * Portable and rugged, easy to use Specifications * Type: TL531 Pen-type Visual Fault Finder * Central Wavelength: 650nm+-10nm * Emitter Type: FP-LD * Output Power: 10mW * Optical Connector: 2.5mm universal connector for test different ST, SC, FC interferes * Operating Model: Both CW and Pulse available * Pulse Frequency: 2-3Hz * Power Supply: 2AAalkaline batteries * Battery Operating Time: 650nm 1mw >65hour 650nm 3mw>50hour 650nm 10mw>15hour * Test with Panasonic LR6AAALKALINE battery * Operating Temperature: -10 - +45C * Storage Temperature: -40 - +70C Package Content 1 x 10mW Pen-type Visual Fault Finder 1 x Carrying Bag