|
|
-
4.6 of 5.0 with 48 Reviews
SALE PRICE: $233.15 23% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK3-DPLX-SC
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK3-DPLX-SC
|
The Fluke Networks' three-jumper test reference cord set contains a duplex multimode cord with scratch-resistant hardened surfaces and polarity indicators. This duplex multimode three-jumper test reference cord is for use with Fluke Networks fiber installation testing devices, such as the DTX CableAnalyzer Series (sold separately). The scratch-resistant hardened surfaces on the connectors enable numerous insertions without degradation in loss performance. The cords indicate polarity with a red boot on the end where light enters and a black boot on the end where light exits for ease of correct usage. They have a 50 μm core diameter, and are available for use with LC, SC, or ST test adapters (sold separately). The test reference cords meet International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC) 14763-3 requirements that test reference cords do not exceed 0.10 dB for multimode at the connectors.
-
4.6 of 5.0 with 34 Reviews
SALE PRICE: $234.98 1% OFF
Manufacturer: Tripp Lite
Brand: Tripp Lite
Model: TLNETCARD
Manufacturer: Tripp Lite
Brand: Tripp Lite
Model: TLNETCARD
|
The TLNETCARD turns a compatible* SmartPro or SmartOnline UPS with an accessory slot into a device you can manage on your network. By inserting the TLNETCARD into the slot and using an SNMP network management platform, web browser, SSH or Telnet, you can monitor and control the UPS in your server room, data center or network closet. The TLNETCARD's intuitive web interface does not require the Java Runtime Environment (JRE). Keep an eye on site electrical data, UPS device status and logged power-related events, such as blackouts, brownouts and overvoltages. Reboot locked network equipment remotely without disrupting power to other devices when using the TLNETCARD with controllable outlets or remotely switchable outlets available on select Tripp Lite UPS systems. Tiered access allows three levels of permissions to be assigned to users for monitoring or controlling the UPS. If an electrical or UPS-related problem occurs on-site, you’ll be notified immediately via email or SNMP trap. The TLNETCARD lets you configure and schedule automatic UPS-driven actions, perform UPS-related tests and shutdowns, upgrade firmware and upload configurations from the web interface. Multiple protocols are supported, including IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and SCP. DHCP/manual configuration support enables network settings to be assigned automatically or manually. 2-Year Limited Warranty
-
4.6 of 5.0 with 16 Reviews
SALE PRICE: $240.00 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFA-ST
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFA-ST
2-Piece ST Interchangeable Adapter Set for the Power Meter Port on CertiFiber Pro, SimpliFiber Pro or DTX-xFM2
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $265.54 22% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 22801009
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 22801009
|
The Fluke Networks TS22A telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; has a two-way speakerphone with low, medium, and high volume settings for hands-free conversation during testing of telephone lines; monitors lines without disrupting service; and stores up to nine 18-digit telephone numbers which can be speed-dialed via the keypad. It provides tone or pulse operation. A pair of LEDs on the front of the unit indicates line polarity when off hook. The test set passes a 20-foot (6 m) drop test, withstands moisture in severe weather conditions, resists radio frequency interference (RFI), and has over-voltage and over-current protection. The keypad has 12 standard dialing keys including star and pound, and function keys to store, recall, and redial numbers and to pause for accessing a second dial tone when dialing through a PBX (private branch exchange). A two-position switch allows selection of monitor mode for high-impedance monitoring without disrupting service, and talk mode for dialing and talking. The test set turns off automatically after five minutes of inactivity to conserve battery life, and is made of high-impact polycarbonate that provides excellent insulating properties. Its contoured hand grip has a non-slip pad that rests on the shoulder to enable hands-free operation. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines. SpecificationsLoop limit2 kΩ maximum at 48 VDC (nominal 20 mA minimum loop current)DC resistance (talk mode)300 Ω (typical)Monitor mode impedance120 kΩ nominal at 1 kHzRotary dial pulse rate10 + or – 5 pulses per secondDTMF (dual-tone multi-frequency) tone frequency error+ or – 1% maximumMemor...
-
4.6 of 5.0 with 16 Reviews
SALE PRICE: $269.70 2% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: MMC-62-SCSC
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: MMC-62-SCSC
Fluke Networks MMC-62-SCSC Multimode Launch Cable, 62.5 µm, 105m Length, SC/SC
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $282.45 17% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 11290000
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 11290000
Elec Contractors Telecom Kit
-
4.6 of 5.0 with 4 Reviews
SALE PRICE: $289.86 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-LC3
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-LC3
|
The Fluke Networks three-jumper test reference cord set contains two duplex multimode cords with scratch-resistant hardened surfaces and polarity indicators. This set of two duplex multimode three-jumper test reference cords is for use with Fluke Networks fiber installation testing devices, such as the DTX CableAnalyzer Series (sold separately). The scratch-resistant hardened surfaces on the connectors enable numerous insertions without degradation in loss performance. The cords indicate polarity with a red boot on the end where light enters and a black boot on the end where light exits for ease of correct usage. They have a 62.5 μm core diameter, and are available for use with LC, SC, or ST test adapters (sold separately). The test reference cords meet International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC) 14763-3 requirements that test reference cords do not exceed 0.10 dB for multimode at the connectors. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments.
-
4.6 of 5.0 with 132 Reviews
SALE PRICE: $306.75 3% OFF
Manufacturer: NETSCOUT
Brand: NETSCOUT
Model: LSPRNTR-200
Color: with WiFi
Manufacturer: NETSCOUT
Brand: NETSCOUT
Model: LSPRNTR-200
Color: with WiFi
|
LinkSprinter is the smart and expert pocket-sized network connection tester that fits in the palm of your hand. In seconds, the LinkSprinter Network Tester applies expert troubleshooting techniques to deliver actionable results with its color-graded LEDs. This affordably priced network tester identifies Ethernet problems in less than nine seconds. With its one-button auto-test design, smartphone integration, and automatic cloud storage of test data, LinkSprinter helps the PC technician, system integrator, home networking enthusiast and other consumers identify, document, store and remedy Ethernet problems from the palm of their hand. Users simply connect an Ethernet cable, push a button, and instantly gain insight into Cloud, Gateway, DHCP, Switch, Link and Power over Ethernet (PoE) connection issues. The LED interface highlights problem areas, while simultaneously sending detailed report information to the user's smartphone (LinkSprinter 200 and 300 models only) and the cloud.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $307.83 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 22801001
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 22801001
|
The Fluke Networks TS22A telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; has a two-way speakerphone with low, medium, and high volume settings for hands-free conversation during testing of telephone lines; monitors lines without disrupting service; and stores up to nine 18-digit telephone numbers which can be speed-dialed via the keypad. It provides tone or pulse operation. A pair of LEDs on the front of the unit indicates line polarity when off hook. The test set passes a 20-foot (6 m) drop test, withstands moisture in severe weather conditions, resists radio frequency interference (RFI), and has over-voltage and over-current protection. The keypad has 12 standard dialing keys including star and pound, and function keys to store, recall, and redial numbers and to pause for accessing a second dial tone when dialing through a PBX (private branch exchange). A two-position switch allows selection of monitor mode for high-impedance monitoring without disrupting service, and talk mode for dialing and talking. The test set turns off automatically after five minutes of inactivity to conserve battery life, and is made of high-impact polycarbonate that provides excellent insulating properties. Its contoured hand grip has a non-slip pad that rests on the shoulder to enable hands-free operation. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines. SpecificationsLoop limit2 kΩ maximum at 48 VDC (nominal 20 mA minimum loop current)DC resistance (talk mode)300 Ω (typical)Monitor mode impedance120 kΩ nominal at 1 kHzRotary dial pulse rate10 + or – 5 pulses per secondDTMF (dual-tone multi-frequency) tone frequency error+ or – 1% maximumMemor...
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $318.00 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 42801009
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: 42801009
|
The Fluke Networks TS42 telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; indicates line voltage and low loop current; has a one-way speaker for hands-free listening and a two-way speakerphone for hands-free conversation during testing; monitors lines without disrupting service; and stores up to ten 23-digit telephone numbers which can be speed-dialed via the keypad. It provides tone or pulse operation. The test set has two basic modes of operation: talk mode for off-hook operations including verifying dialing and receiving calls, and monitor mode for on-hook operations including checking for an idle line, listening for line noise, and measuring DC voltage on the line. In monitor mode, the test set provides high-impedance monitoring of lines without disrupting service. This test set passes a 20-foot (6 m) drop test and has a waterproof case that exceeds American Military Specification MIL-STD-810E. The keypad has 12 standard dialing keys including star and pound, and function keys to store, recall, and redial numbers and to pause for accessing a second dial tone when dialing through a PBX (private branch exchange), among other functions. LEDs on the unit indicate line polarity when off hook, normal or low (below 23 mA) loop current, five different ranges of voltage detected, mute, and battery status. At a voltage greater than 140 VDC, the test set locks out and will not allow off-hook operation. The current LED flashes for 5 seconds to indicate a reading below 23 mA and remains solid for normal readings. The test set is made of high-impact plastic. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines. SpecificationsLine current rangeOff-hook: 10 to 10...
|
|