Network & Cable Testers - Page 22

Manufacturer: Fluke Networks Brand: Fluke Networks Model: ADAP-PTNX-RJ45

Fluke Networks RJ-45 Adapter - Network tester interface adapter (pack of 8 ) - for use with PTNX1, PTNX2, PTNX8 Series Pocket Toners (sold separately)

Manufacturer: Fluke Networks Brand: Fluke Networks Model: LRPRO-REFLCT-OPT

Fluke linkrunner pro reflector option.

Manufacturer: Ideal Brand: Ideal Model: 62-200 Color: Grays

Use the LinkMaster Ethernet tester to test wiring configuration on UTP & STP. Easily check for shorts, miss wires, reversals & split pairs. The tester incorporates a debug feature, automatic shut-off & low battery LED indicator. The tester will test all installed twisted pair wirings, unshielded & shielded modular plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: RPM80

Inductive Pickup for both conventional and distributor-less (DIS) ignitions.

Manufacturer: SainSonic Brand: SainSonic Model: L-C2

SainSonic WattsOut OP-600 miniature handheld optical power meter is for installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design. Specifications * Wavelength(nm): 800nm to 1700nm * Detector: InGaAs * Measurement Range (dBm): -50 - +26 * Calibrated Wavelength(nm): 8.5013001310149E+22 * Resolution(dB): Linear 0.1% or Non-linear 0.01dBm * Connector: SC, FC,ST/ Universal 2.5mm adaptor * Battery Operating Time: 240 h with 1.5V AAA Battery(3) * Working hours: >120 hours (without backlight) * Relative Humidity: 90% (+30C) The 10mW (10-12KM)visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specifications * Type: TL531 Pen-type Visual Fault Finder * Central Wavelength: 650nm+-10nm (635nm can be required on request) * Emitter Type: FP-LD * Output Power: 10mW * Optical Connector: 2.5mm universal connector for test different ST, SC, FC interferes * Operating Model: Both CW and Pulse available * Pulse Frequency: 2-3Hz * Power Supply: 2AAalkaline batteries * Battery Operating Time: 650nm 1mw >65hour 650nm 3mw>50hour 650nm 10mw>15hour * Test with Panasonic LR6AAALKALINE battery Package Content 1 x 10mW Pen-type Visual Fault Finder 1 x Carrying Bag 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual

Manufacturer: SainSonic Brand: SainSonic Model: OP-600+1mW

SainSonic WattsOut OP-600 miniature handheld optical power meter is for installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design. Features * Wavelength(nm): 800nm to 1700nm * High sensitivity, big dynamic range * Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface * Miniature chassis protection design, compact and easy, prevent accident drop damage instrument detectors. * Rapid response, no preheating * Low voltage function display * The automatic shutdown function can be chosen * Automatically shut off the backlight function can be chosen * New user auto-calibration function * Logarithm power (dBm) and linear power (xW) measurement The 1mW (3-5KM)visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specifications * Wavelength: 650nm ± 20nm * Output Power: >1mW * Dynamic Distance:

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFK2-1SMPLX-LC

Simplex Multimode Test Reference Cord for LC Adapter, 50 µm

Manufacturer: Southwire Brand: Southwire Model: 58746340

Southwire t100pk professional tone & probe kit quickly trace non-energized cables - even behind walls. Positive cable detection: tone changes when wires are shorted. Toner features on-board test lead storage

Manufacturer: SainSonic Brand: SainSonic Model: 20mw+ OP-600

SainSonic WattsOut OP-600 miniature handheld optical power meter is for installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design. Features * Wavelength(nm): 800nm to 1700nm * High sensitivity, big dynamic range * Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface * Miniature chassis protection design, compact and easy, prevent accident drop damage instrument detectors. * Rapid response, no preheating * Low voltage function display * The automatic shutdown function can be chosen * Automatically shut off the backlight function can be chosen * New user auto-calibration function * Logarithm power (dBm) and linear power (xW) measurement * Larger screen and LED backlit The 20mW visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Specifications * Wavelength: 650nm ± 20nm * Output Power: >20mW * Dynamic Distance: >18km * Connector: 2.5mm Universal connector * Packaging Size: 210*73*30 * Weight: 150g * Power Supply: AA * 2 * Operating Temperature: -10 -- +50 °C, < 90%RH * Storage Temperature: 20 -- +60 °C, < 90%RH Package Content 1 x 20mW Pen-type Visual Fault Finder 1 x Carrying Bag 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual 1 x Power Meter 1 x Carrying case 1 x ST,FC,SC connector 1 x English manual 　

Manufacturer: Ade Advanced Optics® Brand: Ade Advanced Optics

Feature: It is specially designed for field personnel who need an efficient and economoical tool for tracing,fiber routing andcontinuity checking in an optical netwerk during and after installation. The pocket size tool send s a visible red laser light thouth fiber optic calbes.Breaks or faults in the fiber will refract the light,creating a bright glow around the faulty area.The universal connector can be used for all the most commonly used fiber interfaces. Specfication: *Easy to check fiber faults with visual red laser light *Universally connector for test different ST,SC,FC interfaces *Test for both single-mode and multi-mode cables with optional 2.5mm fiber optic(Standard) connectors to 1.25mm adapter(Optional) *High effective power circuits allow for stable laser power *Operates in both CW(Continuous wave) and pulse mode *Dust-proof design keep fiber connectors clean *(2)AAA-size alkaline batteries provide 15hours of stalbe continuous operation *LED indicator for Power,Battery Low and CW/Pulse indicators *Output power: 5mW *Spectral width: 650+/-10nm *Transmission: continuous or 3Hz pulsed *Range: visibility up to 5km *Operatiing temperature: -10 to +70C *Store temperature: -40 to +85C *Length: 6.3in(160mm) *Diameter: 0.63in(16mm) *Weight: 230g *Connector: universal(2.5mm ferrule)F601B 2.5mm Package included: 1 x Visual Fault Locator Carry leather case Manual