|
|
-
4.1 of 5.0 with 21 Reviews
SALE PRICE: $257.32 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: DSP-PM15A
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: DSP-PM15A
TE Connectivity HIGHBAND (T568A) Personality Module
-
4.1 of 5.0 with 14 Reviews
SALE PRICE: $258.46 11% OFF
Manufacturer: Seesii
|
18. PING testing,test IP camera or other network devices' Ethernet port whether work normally, and the IP address whether right 19. Video signal level test 20. PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement *NEW 21. Cable scan, Send the specific signal, easy to find the connected cable.*(Optional) 22. IP address scan, quickly search the IP address for the connected IP camera and other network devices 23. POE voltage measurement,test the PoE switch's voltage to IP cameras, wireless AP device and other PD devices 24. Device Port flicker,easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency. 25. Link monitor; check the setting IP address whether occupied. 26. TDR cable tester ,cable length and short - circuit measurement( BNC cable, network cable etc) * (Optional) 27. PTZ address scan, search up the ID of PTZ camera. 28. Network cable and Telephone cable testing, display the sequence of connection and the NO of the LAN cable 29. Support RS232/RS485/RS422,Rate 600 ~ 115200bps adjustable 30. Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D, SAMSUNG 31. PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device 32. PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position 33. Audio input test, test the audio signal from pickup devices 34. Visual fault locator , to test fiber's bending and breakage * (Optional) The device is high power-efficient, energy saving and environmental protection. It can last 17 hours for normal use after charging for 7 -8 hours.
-
4.1 of 5.0 with 10 Reviews
SALE PRICE: $260.13 13% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-SC
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-SC
Fluke Networks’ test reference cords are specially configured for accurate and efficient bi-directional testing. Connector end faces are hardened to increase durability and ensure good reference measurements. Test reference cords include mandrels as appropriate. They are available in all common fiber and connector types.
-
4.1 of 5.0 with 20 Reviews
SALE PRICE: $355.33 1% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-ST3
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: NFK1-DPLX-ST3
|
The Fluke Networks three-jumper test reference cord set contains two duplex multimode cords with scratch-resistant hardened surfaces and polarity indicators. This set of two duplex multimode three-jumper test reference cords is for use with Fluke Networks fiber installation testing devices, such as the DTX CableAnalyzer Series (sold separately). The scratch-resistant hardened surfaces on the connectors enable numerous insertions without degradation in loss performance. The cords indicate polarity with a red boot on the end where light enters and a black boot on the end where light exits for ease of correct usage. They have a 62.5 μm core diameter, and are available for use with LC, SC, or ST test adapters (sold separately). The test reference cords meet International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC) 14763-3 requirements that test reference cords do not exceed 0.10 dB for multimode at the connectors. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments.
-
4.1 of 5.0 with 56 Reviews
SALE PRICE: $1,036.04 3% OFF
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: LRAT-1000
Manufacturer: Fluke Networks
Brand: Fluke Networks
Model: LRAT-1000
|
Fluke Networks LRAT-1000 LinkRunner AT Ethernet Network Tester Fluke Networks LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. The AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems. LinkRunner 1000View larger LinkRunner 1000View larger AutoTest Accurately Identifies Network Problems in 10 Seconds With a three-second boot-up and a one-button AutoTest that performs a customized set of connectivity tests in ten seconds, the LinkRunner AT enables quick and accurate problem identification to solve network problems fast. The AutoTest includes Power over Ethernet measurement, negotiation of link speed and duplex, discovery of switch port and VLAN information, negotiation of IPv4 address, availability of the gateway and the DNS servers, and the connection to user-defined devices and TCP applications. Save and share AutoTest profiles to standardize the troubleshooting process and create best practices. Test Twisted Pair Ethernet Links at Gigabit Rates Troubleshoot copper links with the integrated 10/100/Gig copper RJ45 interface. Test twisted pair cables for length, shorts, opens or split pairs with an optional remote cable identifier, the built-in wiremap port or on non-terminated cables. Digital and analog cable toning and switch port light blinking help locate and identify twisted pair cables. The optional office locator kit allows identification of up to six different RJ45 jacks. Discover the Nearest Switch and VLAN Using discovery protocol analysis (LLDP, CDP or EDP) the LinkRunner AT tester identifies the nearest switch and the VLAN IDs. Nearest switch information includes switch name, model, IP address, port/slot, speed/duplex (actual and advertised), signal strength, connection type (MDI or MDI/X), PoE voltage, and a graphical representation of power on...
-
4.0 of 5.0 with 5 Reviews
SALE PRICE: $4.12 3% OFF
Manufacturer: Amico
Brand: Amico
Model: 043026
Manufacturer: Amico
Brand: Amico
Model: 043026
Descriptions:1.You can connect the clip to multimeter or DC power by a lead.2.Help you to test IC or repair cell phone and other mini electronic products more conveniently.3.Powerful spring pulling the min hooks to grasp tiny components firmly and avoid any short-circuit.4.Capable of grabbing small points, such as SOIC IC legs. Also can be inserts into breadboard or other connector.Specifications:Product Name: Test Hook ClipMaterial: Metal, PlasticEach Size: 40 x 12 x 9mm/1.6 inch x 0.5 inch x 0.4 inch (L*W*H)End Hole Size : 4.5 x 1.5mm/0.2 inch x 0.06 inch (L*W)Hook Size: 5 x 2mm/0.2 inch x 0.08 inch(L*W)Color: GreenTotal Weight: 11gPackage:10 x Test Hook ClipsÂ
-
4.0 of 5.0 with 14 Reviews
SALE PRICE: $5.32 3% OFF
Manufacturer: uxcell
Brand: uxcell
Model: a12032000ux0091
Manufacturer: uxcell
Brand: uxcell
Model: a12032000ux0091
Description:You can connect the clip to multimeter or DC power by a lead.Help you to test IC or repair cell phone and other mini electronic products more conveniently.Powerful spring pulling the min hooks to grasp tiny components firmly and avoid any short-circuit.Capable of grabbing small points, such as SOIC IC legs. Also can be inserts into breadboard or other connector.Specification:Product Name : Test Hook ClipEach Size : 40 x 12 x 9mm/1.6inch x 0.5inch x 0.4inch (L*W*H)End Hole Size : 4.5 x 1.5mm/0.2inch x 0.06inch (L*W);Hook Size : 5 x 2mm/0.2inch x 0.08inch(L*W)Color : Black;Material : Metal, PlasticTotal Weight : 11gPackage :10 x Test Hook Clips
-
4.0 of 5.0 with 192 Reviews
SALE PRICE: $5.95 2% OFF
Manufacturer: HDE
Brand: HDE
Model: HDE-H11
Manufacturer: HDE
Brand: HDE
Model: HDE-H11
Not sure what's wrong with your network? Before you buy an expensive replacement router or cable modem, test your cables! If the wires are broken (and you know how those cables get snaked around the house) the tester will detect it. If you make your own patch cables and want to test that the wires are correctly assigned, then you need this! Test your twisted pair, Straight, Crossover, Cat 5 / Cat 5e / Cat 6 / UTP cables with RJ-11 or RJ-45 connectors. Insert the battery, turn on the tester, and connect one end of the cable to the Master side and the other end to the Remote side. The lights indicate problems (if any) with wires in the cables. A very useful item for the networking enthusiast!
-
4.0 of 5.0 with 233 Reviews
SALE PRICE: $9.45 17% OFF
Manufacturer: Pyle Home
Brand: Pyle
Model: PHCT45
Color: Beige
Manufacturer: Pyle Home
Brand: Pyle
Model: PHCT45
Color: Beige
This network cable tester is a must have for the IT professional. It checks up to four pairs of conductors for continuity and correct polarity for both RJ45 and BNC network cables. Check your system with the PHCT45!
-
4.0 of 5.0 with 12 Reviews
SALE PRICE: $12.95 1% OFF
Manufacturer: IDEAL
Brand: Ideal
Model: 62-204
Color: Blue
Manufacturer: IDEAL
Brand: Ideal
Model: 62-204
Color: Blue
A portable, professional coaxial cable tester that will test for opens and shorts on coax connected with BNC jacks. It is highly recommended for the security, networking and video professionals. It has two modes of operation, Standard and Hi-Z, which is used for lengthy runs of cable that might otherwise weaken the tester signal. It is very simple to operate. Simply plug the BNC cable from the wall on and use the included 500 Ohm BNC terminator at the far end for long runs and you are set to go. 50 & 75 ohm BNC Terminators and adapters for use with `F' type connectors are available in the related items window.
|
|