Network & Cable Testers - Page 5

Manufacturer: Triplett Brand: Triplett Model: 3240

LAN cable test set includes: 2 - remote identifiers, #1 and #2, 1 - RJ-45 patch cable (category 5, 2 - RJ-45 in-line couplers, 1 - 9 volt battery, 1 - instruction manual. The PairMaster gives its user the ability to verify and test basic LAN cabling installations. This unique LAN Cable Test Set can identify (Map) one of up to 16 cables with the press of a button. The PairMaster will also check for 8 faults including Near End Crosstalk (NEXT) for double split pairs. Wire-Mapping: The PairMaster will check the point to point wiring, commonly referred to as wire-mapping. This tells the user whether or not the cable pairs, 1/2, 3/6, 4/5, 7/ 8, are wired correctly at both ends. Green LEDs indicate Pass, Red LEDs indicate Fail. If a fault is detected, the corresponding Fault Code is displayed on the large, two digit, seven segment LEDs. Near End Crosstalk (NEXT): The Near End Crosstalk feature checks for excessive A.C. coupling between each pair in a cable. Cable Identification: The PairMaster can also identify a LAN Cable within a bundle. By connecting up to 16 available Remote Identifiers to the workstation wall jacks, the PairMaster will identify and display the number of the Remote Identifier connected to the cable. The user can then easily document the network topology. Overload Protection: The PairMaster has built-in Overvoltage Protection. When voltage from a Central Office Battery is detected, the unit will flash (OL) and shut itself down. Remote Identifier: The Remote Identifier is a small unit used in conjunction with the Triplett PairMaster for LAN Cable identification. The Remote Identifier properly terminates the LAN Cable when connected to the workstation wall jacks. It contains the necessary circuitry to allow the PairMaster to verify proper wiring within the cable. Each of the 16 Remote Identifiers has an overvoltage LED which lights to indicate the presence of damaging voltage. Currently located in beautiful New England, Triplett has developed and produced high-quality test equipment and tools for over...

Manufacturer: NETSCOUT Brand: NETSCOUT Model: SFP-1000SX

The SFP 850 nm transceiver is designed for high performance integrated duplex data transmissions over optical fiber with a data transfer rate of 1.04 gigabit/sec.

Manufacturer: SainSonic Brand: SainSonic Model: OP-700 Color: Yellow

Specifications Wave-length: 800nm to 1700nm Probe: In GaAs Detection limit: 1.0mm Power detecting range: -50dBm to +26 dBm Uncertainty degree: +/-5% Standard wavelength: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm Display resolution: 0.01dBm Working temperature: -20C to +70C Storage temperature: -30C to +80C Automatic shutdown time: 15 minutes Battery serving time: 200 hours Power supply: 9V battery(not included) Dimension: 185*105*50mm Package Content 1X OP-700 Fiber Optical Power Meter 1X Power supply(US plug) 1X Instruction manual 1X Kit bag 1-Year Warranty 12 months from the date of first purchase, provided that the machine has been used appropriately, which ensures the least worries and best experience that we could provide for our dearest customers.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: DSP-PM10B

SYSTIMAX® 110 (T568A) Personality Module

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFC-KIT-CASE

The Fluke Networks NFC-KIT-CASE includes cleaning cube with wipes, ten cards with sealed cleaning zones, solvent pen, 2.5 mm port cleaning swabs and 1.25 mm port cleaning swabs, and instruction sheet in a rugged carrying case. Because the #1 cause of fiber optic cabling failures is due to contaminated end-faces, it is imperative that all optical fiber connections are clean and free of contaminants. Fluke Networks Fiber Inspection & Cleaning Tools are the solution. Whatever your particular needs are, Fluke Networks provides you with the solution to ensure your fiber connections don’t bring your network down.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFA-LC

2-Piece LC Interchangeable Adapter Set for the Power Meter Port on CertiFiber Pro, SimpliFiber Pro or DTX-xFM2

Manufacturer: Fluke Networks Brand: Fluke Networks Model: ACK-HOLSTER

Fluke holster for AirCheck Wi-Fi tester.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: SMC-9-SCSCAPC

Fluke Networks SMC-9-SCSCAPC Singlemode Launch Cable for use with the OptiFiber Pro OTDR, 9 µm, 160 m Length, SC/SCAPC

Manufacturer: Amprobe Brand: Amprobe Model: T-100

Current Tracer Transmitter The Amprobe CT-100 Current Tracer features signal select and distortion alert which provides superior accuracy by visually indicating a clean signal of the traced line, versus "ghost and 'return' path of false signals coming from the neighboring lines, and keeping the user on the target line.

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFC-KIT-CASE-E

The Fluke Networks NFC-KIT-CASE-E contains the best tools to effectively remove the toughest contaminants in any fiber network. You can choose between the easy-to-use IBC OneClick Cleaners, the convenient cleaning cube/card and the best optic solvent pen to clean both patch cords and fiber end faces inside ports. All cleaning materials are lint-free and enable an optimal wet and dry cleaning process. The Fluke Networks’ OneClick Cleaners instantly clean fiber optic bulkhead connectors and end-faces with one click of the button. Just push the tool tip to engage cleaning action. The OneClick Cleaners give you two ways to clean: (1) Remove one cap to clean connectors; and (2) Remove both caps to clean inside most OTDRs or test equipment bulkheads. Perfectly pairs with any Fluke Networks fiber tester and a great complement to the existing Fluke Networks family of fiber cleaning products. Includes an IBC OneClick 1.25 mm cleaner, an IBC OneClick 2.5 mm cleaner, an IBC OneClick MPO cleaner, a solvent pen, a cleaning cube and a soft case.