|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $16.66 1% OFF
Manufacturer: JYE Tech
Brand: JYETech
Model: 6001
Manufacturer: JYE Tech
Brand: JYETech
Model: 6001
Features Accuracy better than 2% Measure range: 1pF - 500uF Automatic range switch Zeroing available Real time serial output of measurement read-outs with time stamp Low cost and easy to build Dimension: 75mm X 58mm X 15mm Weight: 40g
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $16.99 1% OFF
Manufacturer: Mcupper
Brand: Mcupper
Manufacturer: Mcupper
Brand: Mcupper
|
Capacitance Range: 0.1pF +/-0.5%+5 820Hz 200pF 1pF +/-0.5%+5 820Hz 2000pF 10pF +/-0.5%+5 820Hz 20nF 100pF +/-0.5%+5 820Hz 200nF 1nF +/-0.5%+5 820Hz 2uF 10nF +/-0.5%+5 82Hz 20uF 100nF +/-0.5%+5 8.2Hz 200uF 1uF +/-2%+10 8.2Hz 2000uF 10uF +/-4%+10 8.2Hz 20mF 9 measuring ranges from 200pF to 20mF, LCD display with Black Light, Auto discharge for capacitors below 1000V, LSI-circuit provides high reliability and durability, ZERO adjustment for compensation of measuring, data-hold function, Over-range indication, Low battery indaction, Compact structure & pocket size, with protection holster.
FEATURES :
*1. 9 measuring ranges from 200pF to 20mF
*2. LCD display with Back Light
*3. LSI-sircuit provides high reliability and durability.
*4. With input overload protection
*5. ZERO adjustment for compensation of measuring leads
*6. Data-hold function
*7. Over-range indication
*8. Low battery indication
*9. Compact structure & pocket size
Package Contents :
*1 X 6013 capacitor meter
*2X probes with Original Factory Protective Styrofoam Package
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $18.99 18% OFF
Manufacturer: KKmoon
Brand: KKmoon
Model: MRH1631426738275XW
Manufacturer: KKmoon
Brand: KKmoon
Model: MRH1631426738275XW
|
Multi-functional transistor tester for automatic detection of npn and pnp transistors, fet, diodes, dual diode, thyristor, scr, automatic identification of the transistor pin out. Also can be used as square signal and pwm signal generator. Automatically test the pins of a component and show on the display. Measure fet Gate threshold voltage and Gate capacitance. For the following 2100ω resistor while measuring its Inductance measuring range from 0.01mH - 20H. Can be used as signal generator and frequency meter: frequency range from 1hz-2mhz and can generate 1%-99% pwm(pulse width modulation) signals. Notice before measuring capacitance, the Capacitor must be discharged, otherwise very likely damage the meter. Specifications type: assembled tester / DIY kit(optional) display: 160*128 LCD power supply: 1 * 9V battery included); DC 6.8-12V current: Approx. 30mA power supply: 1 * 9V battery included) resistance measurement: max. 50Mω resistance resolution: 0.01Ω capacitance measurement: 25pf~100mf capacitance resolution: 1pF DC voltage measurement: up to 50V screen size: 3.7 * 3cm / 1.45 * 1.18in PCB size: 7.8 * 6.2cm / 3.1 * 2.44in product weight: 66G / 2.3Oz package weight: 69-73g / 2.45-2.57Oz what is in the box 1 * transistor tester DIY kit.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $44.00 21% OFF
Manufacturer: Pro'sKit
Brand: Pro'sKit
Model: MT-5110
Manufacturer: Pro'sKit
Brand: Pro'sKit
Model: MT-5110
Capacitance meter includes easy and correct readout, high measuring accuracy and measurements are possible even under a strong magnetic field. LCD display for low power consumption and clear readout even in bright ambient light conditions, light-weight and compact construction for easy operation and Low battery condition is indicated on the LCD display.
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $84.04 30% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: CR50A
Manufacturer: Amprobe
Brand: Amprobe
Model: CR50A
|
The Amprobe CR50A digital capacitance and resistance tester checks functionality and compatibility of electrical circuits and devices in home and industrial maintenance applications. When set to the low resistance or low capacitance ranges, the unit's zero-adjust pots help eliminate stray resistance and capacitance for more accurate readings. The included set of detachable test leads have test probe tips that are held against the conductor during use and shrouded banana plugs that help prevent shock if the plugs accidentally pull out of the meter while in use. The meter also comes with two alligator clips that fit on to the test probe tips to provide a more secure, hands-free connection than the probe tips. The meter's diode test checks for proper functioning of a circuit's diodes, and an audible continuity buzzer confirms that a circuit is capable of conducting current. The Amprobe CR50A is a manual-ranging meter and requires that the operator choose the appropriate operating range. The liquid crystal display (LCD) has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. A low-battery indicator signals when the batteries need to be replaced. The meter comes with a carrying holster.SpecificationsMaximum resistance detected20 megaohmsMaximum capacitance detected20 millifaradsPower supply9V NEDA 1604, JIS 006P, or IEC 6F22 transistor batteryFuse0.1 amp/250V fuse (one installed, one spare)Standards metEuropean Conformity (CE), International Electrotechnical Commission (IEC) and European Normal (EN) 61010-1, N10140 AustraliaWeight200 g/8 oz.Dimensions6.1 x 2.8 x 1.3 inches/151 x 70 x 38 mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Av...
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $110.00
Manufacturer: EKM Metering Inc.
Brand: EKM Metering Inc.
Model: EKM-25IDS
Manufacturer: EKM Metering Inc.
Brand: EKM Metering Inc.
Model: EKM-25IDS
|
Voltage: 120/240 volts 3-Wire Amperage: up to 100 amps Type: Pass-Through, Single-Phase, 60Hz Data: Pulse Output - 800 pulses per kWh Model: EKM-25IDS This is a very popular product if you are metering your North American household power and you want a simple read-off-the-face kWh meter. State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh. No conversion factor or multiplier. Basic single phase 120/240V 3-wire, 100A version, Neutral bypasses the meter. PLEASE NOTE: No external current transformers are needed with this meter. The CTs are inside the meter already. Wires pass through the body of the meter and through the internal current transformers. Do NOT buy additional current transformers with this meter, even if Amazon says that they are frequently bought together. Compact, very easy to install design. Simple DIN-rail mounting. Wires pass through 3/8+" diameter tubes in the meter body--Will accept #3AWG insulated wire. The only electrical connection is made by 2 small screws which penetrate the wire insulation and pick up power--less than 1 watt--to power the meter. Non-resettable LCD display. Usage data is maintained through power outages. Single-phase energy meter, 100A 120/240-volt, 3-wire, 60Hz. Standard North American household current. Most commonly a white neutral, a black hot and a red hot wire, 200V to 252V between the hots, 110V to 126V either hot to neutral. Very voltage tolerant--the meters will tolerate voltages from 168 V to 312V hot to hot, 84V to 156V hot to neutral. *This meter will not work on a single phase 120v 2-wire system. For that application please see our EKM-15IDS.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $239.10 18% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 830C
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 830C
|
The 830C is 11, 000-count handheld capacitance meters that measure capacitance up to 200 mF. Straightforward to operate, these meters make measurements quickly and simplify the capacitance sorting process. Unlike other handheld instruments such as LCR meters that make measurements using an AC signal with a specific test frequency, they measures capacitance by applying a constant current that briefly charges, then discharges the connected capacitor. These meters include many handy functions. The compare mode which supports 25 sets of high/low limits, provides a convenient means to sort capacitors without needing to set up the meter each time. Data logging, hold/min/max average recording, tolerance, and relative mode features offer additional component troubleshooting tools. Bright LCD backlight. Software for data logging and front panel emulation available as free download. Applications: Capacitive component troubleshooting. Electronic assembly. Component sorting. Quality control. Display: 41/2-digit liquid crystal display (LCD) with maximum reading of 11000 counts automatic polarity indication. Measuring rate (approx.): 5 times /sec for capacitance greater than 100 degree F. Operating temperature: full accuracy at 0 degree C to 40 degree C (32 degree F to 113 degree F). Storage temperature: -20 degree C to 50 degree C (-4 degree F to 122 degree F) without battery. Operating humidity (R.H.): maximum 80 percent R.H. for temperature up to 31 degree C decreasing linearly to 50 percent R.H. at 40 degree C. Temperature coefficient: 0.1 (specified accuracy) / degree C (from 0 degree C to 18 degree C or 28 degree C to 40 degree C). Power supply: single standard 9V battery or AC power adapter. Power consumption: 6.5 mA for battery operation, 2 microamps standby current (power is off). Battery life: 70 hours without backlight (approx.) (based on new alkaline 9v battery). Measures 1-19/32" length by 3-1/2" width by 7-1/2" height. 3 year warranty.
-
4.9 of 5.0 with 50 Reviews
SALE PRICE: $27.99 1% OFF
Manufacturer: MODUTEC
Brand: MODUTEC
Manufacturer: MODUTEC
Brand: MODUTEC
Modutec Kn3S-Dma-029-U Panel Meter 800V Peak To Gnd (Z 4-10 L29)
-
4.9 of 5.0 with 34 Reviews
SALE PRICE: $32.99 1% OFF
Manufacturer: Aubig
Brand: AUBIG
Manufacturer: Aubig
Brand: AUBIG
Specification: *Accuracy maybe affected by the test lead's length and distance of test leads. Especially testing pF small capacitance, shortest test lead is recommended, and be careful the surrounding EMI or RF noise may affect the pF reading. 1) Accuracy: Up to 1% (detail on above table) 2) High Resolution: 5 digit 3) Measuring voltage: 80 Hours
-
4.9 of 5.0 with 33 Reviews
SALE PRICE: $52.71
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Color: As shown
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Color: As shown
|
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) MESR100 V2 AutoRanging In Circuit ESR Capacitor Meter Tester (Up to 0.001 to 100R)Range:0.000 to 1.000R, Accuracy (After Zero, tested with 1,10,100R resistor):1%+2Digit, Refresh Time (Manual Mode):~0.4sRange:1.000 to 10.00R, Accuracy (After Zero, tested with 1,10,100R resistor):1%+1Digit, Refresh Time (Manual Mode):~0.4sRange:10.00 to 100.0R, Accuracy (After Zero, tested with 1,10,100R resistor): 2%+1Digit, Refresh Time (Manual Mode):~0.4s*Accuracy maybe affected by the test lead length and contact point resistance.*Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference1) Accuracy: Up to 1% (detail on above table)Wide Measurement Range: >1uF (for 0.1uF the error will be larger on equation 1/(2*pi*F*C) @ 100Khz )2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range3) Measuring voltage:4) Clamping voltage: ~0.15V (open voltage)5) Battery 2X AA 1.5V battery6) External Power: 5V micro USB7) Operating current 0.02APackage Content:1 x MESR-100 V2 Capacitance Meter Tester2 x 15cm test clips (as photo)2 x AA Batteries Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
|