|
|
-
5.0 of 5.0 with 6 Reviews
SALE PRICE: $110.00
Manufacturer: EKM Metering Inc.
Brand: EKM Metering Inc.
Model: EKM-25IDS
Manufacturer: EKM Metering Inc.
Brand: EKM Metering Inc.
Model: EKM-25IDS
|
Voltage: 120/240 volts 3-Wire Amperage: up to 100 amps Type: Pass-Through, Single-Phase, 60Hz Data: Pulse Output - 800 pulses per kWh Model: EKM-25IDS This is a very popular product if you are metering your North American household power and you want a simple read-off-the-face kWh meter. State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh. No conversion factor or multiplier. Basic single phase 120/240V 3-wire, 100A version, Neutral bypasses the meter. PLEASE NOTE: No external current transformers are needed with this meter. The CTs are inside the meter already. Wires pass through the body of the meter and through the internal current transformers. Do NOT buy additional current transformers with this meter, even if Amazon says that they are frequently bought together. Compact, very easy to install design. Simple DIN-rail mounting. Wires pass through 3/8+" diameter tubes in the meter body--Will accept #3AWG insulated wire. The only electrical connection is made by 2 small screws which penetrate the wire insulation and pick up power--less than 1 watt--to power the meter. Non-resettable LCD display. Usage data is maintained through power outages. Single-phase energy meter, 100A 120/240-volt, 3-wire, 60Hz. Standard North American household current. Most commonly a white neutral, a black hot and a red hot wire, 200V to 252V between the hots, 110V to 126V either hot to neutral. Very voltage tolerant--the meters will tolerate voltages from 168 V to 312V hot to hot, 84V to 156V hot to neutral. *This meter will not work on a single phase 120v 2-wire system. For that application please see our EKM-15IDS.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $145.47
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Features:Ground resistance measurements from 0.01ohm to 2000ohm with 0.01ohm resolutionData hold, low battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4100 Ground Resistance Tester1 * Accessory Kit (including Earth Bars and Wires, Test Wire for Earth Resistance)1 * Carry Case
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $145.47
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Features:Ground resistance measurements from 0.01ohm to 2000ohm with 0.01ohm resolutionData hold, low battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4100 Ground Resistance Tester1 * Accessory Kit (including Earth Bars and Wires, Test Wire for Earth Resistance)1 * Carry Case
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $217.22 1% OFF
Manufacturer: TENMA
Brand: Tenma
Model: 72-6782
Manufacturer: TENMA
Brand: Tenma
Model: 72-6782
TENMA 72-6782 INSULATION TESTER, 1000V, 1000MOHM
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $230.51 13% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: LCR-13
Manufacturer: GW Instek
Brand: GW Instek
Model: LCR-13
4 Wire SMD/chip test fixture. SMD/chip components support. Suitable for SMD range: 0201 to 0805. For LCR-8000G and LCR-800 series LCR meter. Frequency: DC to 10 MHz. Maximum voltage: +/- 35V. BNC inputs are standard-spaced, and compatible with most four-wire LCR bridges.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $239.10 18% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 830C
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 830C
|
The 830C is 11, 000-count handheld capacitance meters that measure capacitance up to 200 mF. Straightforward to operate, these meters make measurements quickly and simplify the capacitance sorting process. Unlike other handheld instruments such as LCR meters that make measurements using an AC signal with a specific test frequency, they measures capacitance by applying a constant current that briefly charges, then discharges the connected capacitor. These meters include many handy functions. The compare mode which supports 25 sets of high/low limits, provides a convenient means to sort capacitors without needing to set up the meter each time. Data logging, hold/min/max average recording, tolerance, and relative mode features offer additional component troubleshooting tools. Bright LCD backlight. Software for data logging and front panel emulation available as free download. Applications: Capacitive component troubleshooting. Electronic assembly. Component sorting. Quality control. Display: 41/2-digit liquid crystal display (LCD) with maximum reading of 11000 counts automatic polarity indication. Measuring rate (approx.): 5 times /sec for capacitance greater than 100 degree F. Operating temperature: full accuracy at 0 degree C to 40 degree C (32 degree F to 113 degree F). Storage temperature: -20 degree C to 50 degree C (-4 degree F to 122 degree F) without battery. Operating humidity (R.H.): maximum 80 percent R.H. for temperature up to 31 degree C decreasing linearly to 50 percent R.H. at 40 degree C. Temperature coefficient: 0.1 (specified accuracy) / degree C (from 0 degree C to 18 degree C or 28 degree C to 40 degree C). Power supply: single standard 9V battery or AC power adapter. Power consumption: 6.5 mA for battery operation, 2 microamps standby current (power is off). Battery life: 70 hours without backlight (approx.) (based on new alkaline 9v battery). Measures 1-19/32" length by 3-1/2" width by 7-1/2" height. 3 year warranty.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $268.96 4% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 308A
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 308A
|
The B&K Precision 308A digital megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 2,000Ω and AC voltage to 600V, lighting a warning indicator when a live circuit is detected. When a resistance measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. Overload protection helps prevent damage to the meter. The meter is built into a carrying case and has a 3-1/2-digit LCD. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the batteries need to be replaced. It comes with eight 1.5V AA batteries, a set of test leads, a 0.5A, 250V fuse, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistance measured2,000MΩTest voltages250V, 500V, 1,000VMaximum low-resistance measured2,000ΩMaximum AC voltage measured600VInstallation ratingCAT III, 600VStandards metIEC safety standard 1010-1; CE markingPower(8) 1.5V AA batteriesWeight1.04kgDimensions (H x W x D)*92 x 170 x 165mm/3.6 x 6.7 x 6.5 inches*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Megohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circui...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $285.68 2% OFF
Manufacturer: Extech
Brand: Extech
Model: 380363
Manufacturer: Extech
Brand: Extech
Model: 380363
|
View larger Digital High Voltage Insulation Tester Measure Insulation Resistance to 60GΩ with test voltages of 500V, 1000V, 2500V, and 5000V. Comes with test leads, eight C batteries, 120V AC adaptor, heavy duty carrying case, and user manual. Additional Features Polarization Index measurement (PI), Dielectric Absorption Ratio measurement (DAR), AC/DC Voltage measurement to 600V with Min/Max, Peak and Relative functions, and 1 to 15 minute timer function for IR measurements. Application and use of insulation testers: Insulation testers can be used to test motor, transformer windings, instruments, and appliances, check for moisture in wire and cable assemblies, safely evaluate a new wiring installation, and check for carbon tracking in breakers, relays, and switches. Extech Insulation Testers offer high sensitivity to assure reliable monitoring of low resistance motor windings. 380260View larger Handheld Megohmmeter The autoranging Extech 380260 digital insulation tester has a large, easily readable backlit LCD with dual display of insulation resistance and test voltage. It measures insulation resistance in three selectable voltages of 250, 500 and 1000V and Insulation Resistance to 2000MΩ. A Lock Power On function allows for hands-free operation. Data Hold capability freezes the displayed reading. Additional features include: Lo ohms for testing connections and Auto Power Off for conserving battery life. Complete with heavy-duty test leads, alligator clip, hanging strap, protective carrying case, six AA batteries, and user manual. Optional NIST Certificate of Calibration with data available (Model 380260-NIST). 380360View larger Digital Megohmmeter Safely tests wiring insulation of motor, transformers, instruments and appliances with three test ranges to choose from: 2000M/1000V, 200M/500V, and 200M/250V. Also measures continuity to 200 ohms and AC voltage to 600V. Additional features include: data hold, auto power off and overload protection to 2200V (up to 1 min.). Press To Test button autom...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $309.11 5% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: AMB-25
Manufacturer: Amprobe
Brand: Amprobe
Model: AMB-25
This affordable and rugged megohmmeters are fast and easy to use, and offer the features you need for most insulation test applications including wires, cables, transformers, and motors.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $449.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1503
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-1503
|
The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...
|
|