Capacitance & Resistance Meters - Page 3

Manufacturer: Amprobe Brand: Amprobe Model: MO-100

Diagnose potential failure with the MO-100, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

Manufacturer: Hioki Brand: Hioki Model: 3151

The Hioki 3151 Earth HiTester performs 3-electrode and 2-electrode ground resistance testing in tough use in field environments. Recommended uses include ground resistance testing of electrical grounding, mesh grounding, electrical power equipment grounding, and when the measurement point location is at a distance from the insertion point of the grounding electrode. Measurement frequency is switchable from normal (3 point) to simple (2 point) to minimize the influence of harmonic earth voltage. The tester can take measurement readings up to 115% of the actual range. For safety, overvoltage and incorrect connections sound an alarm buzzer. Quick reference instructions are included in the inside cover of the meter to assist with meter use and equipment setup for 3-point and 2-point testing. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The Hioki 3151 tester comes with a 1m black measurement cable, 10m yellow cable, 20m red cable, auxiliary rods, three cable winders, and carrying case. The tester is CE marked, with safety ratings of EN61010, CAT II, and pollution degree 2. Specifications Ground resistance range, 3-point 10Ω/100Ω/1000Ω Ground resistance range, 2-point 100Ω/1000Ω Nominal deviation + or – 2.5% full scale Grounding voltage 30V Operating method AC potentiometer method Measurement frequency 575Hz (with 3a or 2a selected) or 600Hz (with 3b or 2b selected) Measurement current AC 15mA max (AC 3mA for 2-point testing) Operating temperature range 0 to 40 degrees C Operating humidity 80% rh maximum (no condensation) Power source (6) 1.5V AA batteries (included) Weight 800g Dimensions 164 x 119 x 88mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurem...

Manufacturer: Gold-Line Brand: Gold-Line Model: ZM1P

A portable, battery operated meter useful to every sound contractor or installer, this unique instrument will make measurements on 25, 50, 70, or 100 volt line systems.

Manufacturer: Amprobe Brand: Amprobe Model: AMC-2

The Amprobe AMC-2 hand cranked insulation tester is an analog meter to measure insulation resistance on wires, cables, transformers, and electrical motors. The unit measures insulation resistance from 0 to 100 ohms using a 500V direct current (DC) test voltage. The test voltage is produced by a hand-cranked constant voltage generator, so the unit never needs batteries. A guard terminal prevents surface leakage from affecting the instrument's readings. The AMC-2 is designed for use by electricians and electrical contractors. Specifications Power supply Hand-cranked constant voltage generator Insulation resistance range 0 to 100 ohms DC test voltage 500V Weight (including batteries) 2.5 lb./1.13kg Dimensions 7 x 4 x 3.6 inches/177.8 x 101.6 x 92.1mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. A...

Manufacturer: Megger Brand: Megger

The Megger MIT410 Insulation and Continuity Tester with PI, DAR and switch probe has been designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirementsBe sure to Login to transcat.com for preferred member pricing.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 886

High accuracy LCR/ESR meters were the first handheld meters of their type on the market, offering fast, reliable, and versatile testing at a low cost. With a wide range of test frequencies up to 100 kHz, these LCR meters can perform many different measurements - Z, L, C, DCR, ESR, D, Q, and diameter. Test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz (886), 1 Vrms, 0.25 Vrms, 0.05 Vrms. These instruments are designed for both component evaluation on the production line and fundamental impedance testing for benchtop applications. With a built-in direct test fixture, you can test lead components very easily. The optional 4-wire test clip can give a convenient connection to larger components and assemblies with the accuracy of 4-wire testing. Measurement parameters: Z, L, C, DCR, ESR, D, Q, and Diameter. 0.2 percent basic accuracy. Dual LCD display. SMD Surface Mount Tweezer Probe included. Very quick response, user friendly. Fully auto/manual selection. DC resistance measurement. Rechargeable battery / AC powered. Frequency accuracy: +/-0.1 percent. Level: 1Vrms, 0.25Vrms, 0.05Vrms, 1Vdc (for DCR). Level accuracy: +/-5 percent. Output impedance: 100 ohm, +/-5 percent. Operating temperature: 32 to 104 degree F (0 to 40 degree C). Storage temperature: -4 to 158 degree F (-20 to 70 degree C). Relative humidity: up to 85 percent. Battery type: Ni-MH or Alkaline (2 x AA size). Battery charge: Constant current 150mA approximately. Battery operating life: 2.5 hours typical. AC operation: 110V/220V AC, 60/50Hz with proper adapter. Low power warning: under 2.2V. Measures 6-57/64" length by 3-25/64" width by 1-57/64" height. 3 year warranty.

Manufacturer: Global Specialties Brand: Global Specialties Model: LCR-600

The LCR-600 is a high precision test instrument used for measuring the inductance (L), capacitance (C), and resistance (R) of an electrical component. The LCR-600 has an operational frequency range of 100 Hz to 100 kHz and basic measurement accuracy of 0.3%. There is a dual LCD display, measurement voltage fixed at 0.6 V, auto-detect function, and open-circuit /short-circuit compensation. Use the meter to check ESR values of capacitors and inductors, sort and select components, identify unknown components, and general LCR values.

Manufacturer: Extech Brand: Extech Model: 382357

View larger Clamp-On Ground Resistance Tester Model 382357 Clamp-on Ground Resistance tester enables non-contact measurements of ground conductors without the need for auxiliary ground spikes. Comes with 9V battery, resistance check plate, metal storage case, and user manual. Optional NIST Certificate of Calibration with data available (Model 382357-NIST). View larger Additional Features Measures resistance from 0.03Ω to 1500Ω and True RMS AC Leakage current from 0.2mA to 30.00A. It features programmable datalogging with 116 points, programmable hi/lo alarms, 0.9” jaw size, self-calibration when powered on, and verification resistors to confirm the accuracy of the meter. Cat III-300V. Applications Clamp-On Ground Tester simplifies ground resistance measurements on multiple-point ground systems. Use to verify the resistance of cellular and communication tower ground grids, check utility transmission systems and grounding rods, perform maintenance on electrical transportation systems. Ideal for verifying ground systems in sub-stations, factories, and office buildings.

Manufacturer: Megger Brand: Megger Model: 6410-863

The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...

Manufacturer: Megger Brand: Megger Model: 1000-347

The Megger DET4TD2 four-terminal ground resistance tester measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing, and it has a maximum resistance input of 20,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TD2 comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, and four right-angle terminal adaptors. The tester's liquid crystal display (LCD) provides confirmation of the connection and functionality of the potential and current spikes and indicates the level of ground noise that is present.The DET4TD2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The tester comes in a hard polypropylene case for transport and storage. The case has an ingress protection rating of IP54, meaning it protects against the ingress of dust and splashing water, making it suitable for outdoor use. The DET4TR2 operates on eight 1.5V alkaline AA batteries (included). A low-battery indicator signals when the batteries need to be replacedSpecificationsMaximum ground resistance input20,000 ohmsMaximum ground voltage input100 volts (V)Standards metInternational Electrotechnical Commission (IEC)/European Standards (EN) 61010-1, EN61557, Keuring Electrotechnisch Materieel Arnhem (KEMA) K85B, European Conformity (CE) marked, C-tick markedPower supply1.5V alkaline AA batteries (ei...