Capacitance & Resistance Meters - Page 7

Manufacturer: Megger Brand: Megger Model: 6310-755

The Megger 6310-755 standard accessory kit set of accessories used in ground resistance testing. It is used with a Megger DET3T or DET4T digital ground resistance tester (sold separately). The kit includes 1.13kg (2.5 lb.) hammer, four 12mm (1.5”) galvanized steel spikes, two spike extractors, and four test leads in a soft carrying case. The 6310-755 is an accessory used perform ground resistance with a Megger DET3T or DET4T digital ground resistance tester.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-1623

The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1623 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Megger Brand: Megger

The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.Be sure to Login to transcat.com for preferred member pricing.

Manufacturer: Amprobe Brand: Amprobe Model: AMB-50

The Amprobe AMB-50 industrial high-voltage insulation resistance tester is a digital meter that measures insulation resistance and voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, generators, and electrical motors. The tester has automatic range selection for increased safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC) and insulation resistance from 0 to 1 teraohms using 500, 1,000, 2,500, or 5,000V DC test voltage. A low-resistance range (0 to 4,000 ohms) is used to measure resistance in motor windings. The internal memory holds up to 18 test results for later download to a PC using the included USB cord. The tester is safety rated to European Standard (EN) 61010-1, Category III, 600V. The unit has a programmable timer to perform Dielectric Absorption Ratio Tests, Polarization Index (PI) tests, and comparison tests. The tester is powered by eight C batteries (included). The AMB-50 is designed for use by electricians and electrical contractors. Specifications Power supply (8) C batteries (included) Insulation resistance range 0 to 1 teraohm Test voltages 500, 1,000, 2,500, or 5,000V DC AC and DC voltage range 30 to 600V Weight (including batteries) 4.4 lbs./2kg Dimensions 202 x 155 x 94mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information e...

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: Megger Brand: Megger Model: 6220-787

The Megger 6220 series four-piece duplex test lead set includes two current leads with spring clamps and two potential leads with crocodile clips are for use with the Megger DLRO200 digital microhmmeter. These current and potential test leads are for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring clamps have a 2.4" (60 mm) jaw opening, and the crocodile clips (also known as alligator clips) have a 0.9" (22 mm) jaw opening. Both the spring clamps and crocodile clips provide hands-free connection to a conductor. The leads have a maximum current input of 200 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and...

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: Megger Brand: Megger Model: 6111-024

The Megger 6111 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for St...

Manufacturer: Amprobe Brand: Amprobe Model: AMB-50-AMZN

The amprobe amb-50 industrial high-voltage insulation resistance tester is a Digital meter that measures insulation resistance and Voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, Generators, and electrical motors. The tester has automatic range selection for increased Safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC) and insulation resistance from 0 to 1 teraohms using 500, 1,000, 2,500, or 5,000V DC Test Voltage. A low-resistance range (0 to 4,000 OHMS) is used to measure resistance in motor windings. The internal Memory holds up to 18 Test results for later download to a PC using the included USB cord. The tester is Safety rated to European standard (EN) 61010-1, category III, 600V. The unit has a programmable Timer to perform dielectric absorption ratio tests, polarization Index (pi) tests, and Comparison tests. The tester is powered by eight C batteries (included). the amb-50 is designed for use by electricians and electrical contractors.