Current Testers - Page 11

Manufacturer: Concours Specialties Brand: Concours Specialties

Universal Waterproof Fuse Relay Box Panel Cooper Bussmann ATV UTV RV Boat 4X4. (5) 35 amp Picker relays. (5) 30 amp fuses for relays and (5) 15 amp fuses for constant circuits. 12 gauge relay output wires. 16 gauge constant output wires. 18 gauge relay trigger wires. 16 gauge ground. 8 gauge power. The base and cover. Mounting brackets. Cover gasket. Instructions.

Manufacturer: Morningstar Farms Brand: Morningstar Corporation Model: SunSaver

Morningstars Sun Saver Duo is an advanced PWM two battery controller for RVs caravans boats and cottages. Rated for 25 amps at 12 volts DC this product will charge two separate and isolated batteries at the same time such as a house and an engine battery based on user selectable priorities. This controller also includes a backlit remote meter which may be mounted in or on a wall and displays digital and pictorial status information about the solar power system. The Sun Saver Duo employs Morningstars legendary Sun Saver controller technology whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry. The Sun Saver Duo is epoxy encapsulated for environmental protection is user adjustable via DIP switch or connection to a personal computer and has an optional remote temperature sensor.Features. Sun Saver-Duo 25 amp 12 volts with Meter Kit.. Two Battery Charging.. Provides More System Information.. Lower Cost.. Easy to Install.. Longer Battery Life.. Extensive Electronic Protections.. Highly Reliable.. Dimension - 17 x 5.6 x 4.1 in.. Item weight - 1lbs.

Manufacturer: General Technologies Corp Brand: General Technologies Corp Model: CM1000 Color: Grey with Yellow Clamp

GTC 1000 Amps AC/DC current clamp meter is equipped with auto-range and high current measurement capability and allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 1000A, making it ideal for testing all kinds of loads such as found in electric motors, fuel pumps, charging systems, starter currents, alternators, etc. This features a small and narrow jaw, which can accept cables up to 1 inch (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features includes resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.

Manufacturer: AEMC Brand: AEMC Model: MN255

The Model MN255 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN255 meets EN 61010, 600V, Cat III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN255 has a 0.78" jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The Model MN255 uses tape wound cores to further improve its high and low end performance. Rated at 200A RMS it has a measurement range to 240A RMS. Measurement range of 0.5 to 240AAC. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 100mVAC/AAC output signal. Transformation Ratio: Voltage output. Overload: 240A for 10 min ON, 30 min OFF. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 200A RMS with an error (due to CF) of 4 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet Lead. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

Manufacturer: AEMC Brand: AEMC Model: MN312

The model MN312 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN312 meets EN 61010, 600V, category III safety standards and is CE Marked and UL approved for Canada and United States. The model MN312 has a 20mm jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The model MN312 is a high performance model and uses a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The model MN312 is an excellent probe to be used in power and low level current measurement applications. Measurement range of 0.01 to 240A. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 1mV/A output signal. Transformation Ratio: 1000:1. Limit Operating Conditions: 200A permanently to 3kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 5 at 280A Peak with an error (due to CF) of 5 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: jack. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

Manufacturer: Fluke Corporation Brand: Fluke Model: OC4USB

Safety-designed interface cable to connect the optically-isolated serial interface port of ScopeMeter or power quality analyzer to a standard USB-interface on your PC. Optical isolation allows you to float your instrument at mains voltages or beyond, while being connected to your PC. Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers. Supports Windows Vista/ XP/2000/Me/98 second edition. Baud rate: 57.6 k Baud max. Logic states: SPACE = 0, light with wavelength 800 nm, MARK =1, no light. Handshake method: XON/XOFF, software handshake only. Environmental: meets requirements of MIL-T-28800D type III, Class 3. Operating temperature: -20 degree C to 55 degree C. Storage temperature: -20 degree C to 70 degree C. 1.5m Cable length.

Manufacturer: Fluke Brand: Fluke Model: V3000 FC

AC Voltage Module, Voltage Range: 3mV to 1000VAC, Indication: LCD, Audible Alert: No, Battery Type: AA, Safety Rating: CAT IV 600V,CAT III 1000V, Flashlight: No, On/Off Switch: Yes, Length: 6-1/2", Width: 2-1/2", Depth: 1-13/32", Switch Type: Push Button, Special Features: Wireless Communication, Operating Temp.: -10 Degrees to 50 Degrees C, Includes: Test Leads, Alligator Clips, Batteries, Magnet Strap, Quick Start Guide Only, Manufacturers Warranty Length: 3 yr.

Manufacturer: Reed Brand: REED Instruments Model: R5040

This autoranging True RMS clamp meter is capable of measuring AC/DC current (500, 1000A) and voltage (AC: 500mV, 5, 50, 500, 750V, DC: 500mV, 5, 50, 500, 1000V) , resistance (500Ω, 5, 50, 500kΩ, 5, 50MΩ), frequency, capacitance (500, 5000nF, 50, 500µF, 5mF), duty cycle and temperature (-148 to 1832°F (-100 to 1000°C)). Featuring a 50,000 count backlit LCD display with a 61-segment analog bargraph and double molded plastic housing, the R5040 includes keeps track of min/max readings and includes a non-contact voltage detector built into the clamp tip.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-16 TRMS-PRO

The Amprobe ACD-16 Pro TRMS digital clamp meter with dual display and temperature probe is a true RMS (root mean square) sensing, auto-ranging multimeter for measuring current, voltage, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure AC voltage and direct current (DC) voltage to 600 volts, resistance to 1,000 ohms, and frequency to 500 kHz. The clamp has two jaws that can close around electrical conductors up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. The data logging feature captures the highest and lowest readings in every one-minute time interval over a period of time up to 5,400 minutes. The meter comes with a K-type thermocouple probe for measuring temperature. The meter's backlit liquid crystal display (LCD) is visible in low light. The hold function keeps the reading on the display, even after the meter is disconnected. The auto hold feature automatically captures stable readings. The unit automatically turns off after 16 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. It is an auto-ranging multimeter and automatically selects the correct operating range for the property being measured. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is...

Manufacturer: AEMC Brand: AEMC Model: MN93-BK

Model MN93-BK is a AC current probe with 10 Feet leads. Model MN93-BK is of 200A capacity. For use with models 3945/3945-B, 8220, 8230, 8335, L104 and L564.