Current Testers - Page 4

Manufacturer: NITBUY

This anel Meter is specially designed for measuring current and monitoring battery & electrical system; This meter offers users great simplicity and easily reading; The Analog Panel Meter is low power consumption and long lasting.

Manufacturer: uxcell Brand: uxcell Model: a11061000ux0103

Measures current range of AC 0-30A with accuracy of Class 2.5. Clear and easy to read scale and a button for fine tuning the dial.

Manufacturer: SMAKN Brand: SMAKN Color: YELLOW

Features: precision automatic adjustment ,when less than 10V accurate to 0.01V 10V, more than 10V accurate to 0.1V. Takes full advantage of the resources of digital display voltmeter basic performance parameters are as follows: Dimensions: 27mm * 15mm * 18mm (with fixed ear size) Range (Range): DC3.50-30.0V 2-wire access (with reverse polarity protection reversed does not burn) Display: three digits 0.28-inch LED digital tube Weight: 10 grams Display color (Color): blue /yellow/green/red Refresh rate: 1s /time Measurement accuracy: 1% (+ / - 1 words) Operating Temperature: -10 ℃ ~ 65 ℃ Supply voltage: DC3.50-30.0V (measurement collinear) paking including:1x 0.28" micro waterproof DC3.50-30.0V two-wire digital voltmeter Please note: 1> SMAKN is a registered trademark and the only authorized seller of SMAKN branded products. 2> SMAKN provide you various kinds of great products at the lowest possible prices, welcome to our store and get what you want !!! 3> SMAKN highly appriciate all customers' opinions to improve the selling ,also if anything you unsatisfied, pls contact our customer service department for probable best solution.

Manufacturer: BQLZR Brand: BQLZR Model: N11368

Note: The color of the item may vary slightly due to photography and your own computer Transformer and Meter are Separated Doesn't require a additional power Volts and Amps display simultaneously Current Transformer included Applicate in household, kitchen and industrial equipment etc Specifications: Working Mode: Voltage and current dual display, two wires connection Measuring Range: AC 80-300V, AC 0-200A Power consumption: 0.2VA Measurement speed: about 2 times per sec Dimensions: 70 x 42 x 32mm or 2.75 x 1.65 x 1.25 inch(L X W X H) Weight: 85g Package included: 1 x Volt Panel Meter

Manufacturer: DROK Brand: DROK Model: 100419

Parameters: Measuring Accuracy: +/- 1% 2 digits Displayer: LCD Measure Range: DC0-199.9V_0-200A Power Consumption: less than 0.5VA Measure Speed: 2 times per second Size: 70*40*39mm Installation Size: 68*38mm Extreme Working Condition Working Temperature: -10～+50℃ Working humidity: 10～80%(No condensation) Working pressure: 80～106kPa Sunlight: no direct exposure Package includes: 1 x digital voltmeter Ammeter

Manufacturer: uxcell Brand: uxcell

1.Polyolefin Heat Shrink Shrinkable Wire Insulation Tube Sleeving, Ratio 2:1.2.Mainly used in wire, solder joint protection, electrical wire end and electronic devices protection and insulation protection, on the surface of parts and metal protection, anti-rust, anti-corrosion treatment related products, wire and other products identification,etc.

Manufacturer: Mieo Brand: Mieo Model: CT3 Color: Max 100A For D16mm wire

D0.67inches/D16mm Clamp Sensor for Wireless Electricity Monitor 1)Primary Current (Arms50/60Hz): Max 100A 2)Secondary Current at primary nominal (rms): 20mA 3)D.C. Resistance at 25.C (Ohm): Max 460Ohm 4)Burden resistive load of secondary winding: 50 Ohm 5)Secondary output voltage at primary nominal for 15Ohm load: 500mv 6)Amplitude Error f(%) in the range of primary current from 1A to 60A: +-2% 7)Phase Angle Error in the range of primary current from 1A to 60A and at frequencies 50/60Hz: +-2.5C 8)Insulation between primary non-insulated wire,touching inside surface of the window,and secondary output must withstand AC rms voltage: 2500v/amA/3min 9)Temperature error of currents ratio: less than 50ppm/k 10)Insulation resistance (500VDC): 100MQ Min 11)Ambient operating temperature range: -40F to 176F 12)Suitable for the fire wire whose diameter less than D0.67inches/D16mm Three sensors will be required for 3-phase system. "Wireless Electricity Monitor" is an ideal digital monitor for checking electricity consumption,inspecting the wind or solar power generator and any power systems. It displays energy usage information in LCD screen with backlight. "Wireless Electricity Monitor"includes: Current Sensor:Just clamp on the fire wire to measure the current with electromagnetic induction. Transmitter: Transfer the data from Current Sensor to the Monitor with wireless signal. Monitor: Receives the real-time date from Transmitter and displays readable parameters such as electricity consumption,cost and historical consumption chart.

Manufacturer: NIUDB Brand: NIUDB Color: ACM02

Capacitance, frequency,duty cycle and temperature test; Both auto range and manual range; Perform measurements of current, voltage, resistance; Continuity and diode test; With data hold function; Over range protection; Clamp light and back light; Auto power off; Low battery indication; Rubber case to ensure safety. Temperature: -20°C to 750°C +/-2.0% Power: 3 * AAA Battery (not included) Item size: 20.8 * 7.8 * 3.5cm Item weight: 250g Package size: 23 * 10.6 * 6cm Package weight: 502g Display: 3999 counts DCV: 400m/4V/40V/400V/600±0.8% ACV: 400mV±0.8%,4V/40V/400V/600V±1.0% ACA: 4A/40A/400A/600A±2.0% Resistance: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ±1.2%, 40MΩ±2.0% CAP: 50nF/500nF/5μF/50μF/100μF±4.0% Frequency: 50Hz/500Hz/5000Hz/50kHz/100kHz±1.0%

Manufacturer: NTE Electronics, Inc. Brand: NTE Electronics Model: RS1-1D4-21 Color: One Color

NTE's extensive line of UL & CSA listed relays and accessories feature over 750 different NTE relays that you can cross reference to more than 85,000 industry types from 267 different suppliers. Included is a remarkable multifunctional programmable timer/counter that can be programmed to 10 different timing modes, two counting modes, and AC or DC input, slim-line I/O modules in industry standard packaging, PC mountable relays suitable for 5mm grid patterns, PC mountable relays for telecommunications, security and appliances, two different types of thermal circuit breakers, plus new industrial types for HVAC, machinery and equipment applications.

Manufacturer: Mieo Brand: Mieo Model: CT4 Color: Max 150A For D22mm wire

D0.87inches/D22mm Clamp Sensor for Wireless Electricity Monitor 1)Primary Current (Arms50/60Hz): Max 150A 2)Secondary Current at primary nominal (rms): 20mA 3)D.C. Resistance at 25.C (Ohm): Max 460Ohm 4)Burden resistive load of secondary winding: 50 Ohm 5)Secondary output voltage at primary nominal for 15Ohm load: 500mv 6)Amplitude Error f(%) in the range of primary current from 1A to 60A: +-2% 7)Phase Angle Error in the range of primary current from 1A to 60A and at frequencies 50/60Hz: +-2.5C 8)Insulation between primary non-insulated wire,touching inside surface of the window,and secondary output must withstand AC rms voltage: 2500v/amA/3min 9)Temperature error of currents ratio: less than 50ppm/k 10)Insulation resistance (500VDC): 100MQ Min 11)Ambient operating temperature range: -40F to 176F 12)Suitable for the fire wire whose diameter less than D0.87inches/D22mm Three sensors will be required for 3-phase system. "Wireless Electricity Monitor" is an ideal digital monitor for checking electricity consumption,inspecting the wind or solar power generator and any power systems. It displays energy usage information in LCD screen with backlight. "Wireless Electricity Monitor"includes: Current Sensor:Just clamp on the fire wire to measure the current with electromagnetic induction. Transmitter: Transfer the data from Current Sensor to the Monitor with wireless signal. Monitor: Receives the real-time date from Transmitter and displays readable parameters such as electricity consumption,cost and historical consumption chart.