Current Testers - Page 9

Manufacturer: Fluke Corporation Brand: Fluke Model: 4358028

The Fluke 4358028 hanger kit for the Fluke 1730 three-phase energy logger enables the operator to hang the meter, power supply, or both from any magnetic surface for hands-free use (meter sold separately). The hanger has two magnets to hang the meter with the power supply attached, the meter itself, or the power supply itself. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.What's in the Box?Velcro strapTwo magnetsHanger

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: Test Products International, Inc Brand: TPI Model: 265

The TPI 265 digital clamp meter is an average-sensing, manual- and auto-ranging multimeter for measuring current, voltage, resistance, capacitance, and frequency in electrical testing applications. It has a clamp that measures AC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 35mm (1.37") in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V, resistance to 40 megohms, voltage frequency to 40mHz (megahertz), and capacitance to 4,000 microfarads. An audible continuity sensor confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The meter has a rotary switch to select the property to measure, and a 4,000-count LCD that shows readings numerically and in a 41-segment bar graph. The unit operates on a single 9V battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is rated for CAT III installations to 600V, which covers items us...

Manufacturer: Fluke Brand: Fluke Model: C3004IND

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-6 PRO

The Amprobe ACD-6 Pro digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and the diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 dig...

Manufacturer: Extech Brand: Extech Model: TL831 Color: Multicolor

EXTECH Industrial Test Lead

Manufacturer: Mastech Brand: Mastech Model: MS2115B

Features: Dual Display with 6000 countsJaw size up to ¦µ40mm/1.6 inchAuto Ranging and Manual RangingDC/AC current measurement up to 1000ATests AC/DC voltage and current, resistance, capacitance, frequency and duty cycleRelative MeasurementDiode 2.7VContinuity Buzzer

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9092/001

The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 0.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.

Manufacturer: Fluke Corporation Brand: Fluke Model: L215

SureGrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders. TP220 SureGrip test probes. TL224 SureGrip silicon test lead set. Foldable soft pouch with six pockets and hook-and-loop.

Manufacturer: Greenlee Textron Brand: Greenlee Model: CM-660

Greenlee AC True rms clamp meter is designed to measure AC currents, DC voltages, resistance and frequency. It includes digital low pass filter for precise readings on variable frequency drives. Clamp meter easily tests continuity and diodes. It can record average, maximum/minimum readings. Clamp meter comes with two voltage detection modes that is non-contact or single test lead. It has a two 1.5V AAA batteries, test leads and case for comfortable carrying. Clamp meter has AmpTip that provides increased accuracy on small wires carrying low currents. It gives precise measurements of the current up to 60600 Amps. Clamp meter has a 6000 count LCD display. It has a 1.18-Inch jaw opening. Clamp meter offers accurate measurements of voltage rating up to 600 VAC/DC. It easily holds data and gives exact measurements on the resistance range of 600, 6/60k Ohm. It offers correct measurements of frequency rating for voltage/AmpTip currents at 50/60 Hz and higher currents at 50 - 400 Hz. Clamp meter is UL listed.