EMF Meters - Page 10

Manufacturer: FW BELL Brand: FW Bell

FW BELL 5180 METER, GAUSS, 1G-30kG, 0HZ-25KHZ, 1.1%

Manufacturer: Luckystone Brand: Luckystone Model: DT-1130

Features: Simple operation and highly sensitive. Can detect the power of electromagnetic radiation around home electronics, electric wire, industrial equipment and so on. Wide range of detectable frequency. Data hold function. Applications: For detecting environmental electromagnetic radiation: indoors, computer station room, industrial control room, electric wire, high voltage wire, monitors, etc. For detecting home electronics: cellphone, PC, TV set, copy machine, fax machine, microwaves, refrigerator and so on. Specifications: Display readings: Three semi-liquid crystal display, maximum reading 1999 Housing: ABS Power 1 * 6F22 9V Battery (not included) Frequency Range: 50Hz~2000MHz Reacting time: 0.4S Color: Black Item dimension: 13.5 * 7.1 * 3.2cm/ 5.3 * 2.8 * 1.3in Item weight: 104g/ 3.66oz Package dimension: 16.5 * 11.3 * 4.6cm/ 6.5 * 4.4 * 1.8in Package weight: 160g/ 5.6oz Package includes: 1 * Electromagnetic Radiation Detector 1 * Instructions

Manufacturer: Technology Alternatives Corp. Brand: Technology Alternatives Corp. Model: GHOST METER PRO

It has 4 modes. Modes 1 and 2 present the newer and older ghost energy. Mode 3 is an emf detector. Mode 4 answers questions with yes and no indications (1 beep or two).

Manufacturer: DAS Distribution Brand: DAS Distribution Model: 21487-300

The Mel-8704R-ATDD is designed specifically to monitor and detect a +5 deg. / -5 deg. ambient temperature (deviation) change that occurs within an environment. When a temperature shift does occur, the device will react quickly and produce a unique, one octave "step" tone for each individual degree change. Incremental "+" changes have a higher pitch while descending "-" temperature drops have a lower pitch. This allows a paranormal investigator to "hear" and validate any temperature change around the device from up to 50' away (line of sight). This device can also help investigators become more efficient and thorough by helping to monitor remote unattended areas throughout a house or building during an investigation and help direct attention to an area that may have paranormal activity. In addition, the ATDD device utilizes RED LEDs for a "+" temperature change and BLUE LEDs for a "-" change. A single multi-purpose push button is used to "Tare" the circuit and mute the sound in any of the three configurations. Mel-8704R-ATDD Measures EMF, ambient Temperature and detects +5/-5 degree hot & cold spot temperature variations EMF "Burst" (100msec) mode feature for rapid EMF fluctuation EMF Min/Max capture Rapid response ambient temperature measurement Temperature min/max capture +/- 5 degree hot and cold spot detection with Red (Hot) & Blue (Cold) LED indicators with ascending/descending tones. Includes manual baseline correction and auto mute. Red night view Backlight Display with On/Off Button High intensity Red Flashlight Glow in The Dark Push Buttons - Must be charged under a bright light for 5 minutes prior to use

Brand: General Electromagnetics Model: 100XE

The TriField Meter is the most economical combination of magnetic, electric, and analog radio/microwave detection in one package. This meter combines all these unique features with fast, reliable measurements of electromagnetic pollution: Continuous sampling needle gauge readout; 3-axis magnetic sensitivity; Two separate scales for magnetic field readings; Hand-held portability and simplicity. The TriField Meter will accurately measure EMF pollution from these "hot spots" in your home, office, or work environment so you can take steps for "prudent avoidance". Have peace of mind and confidence in knowing where this body penetrating pollution is coming from, and how powerful it is, so you can protect yourself and loved ones. Instruction booklet and 9V battery included. RF capability is not for digital signals. One year limited warranty. Made in U.S.A.

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: EMF300

Microwave Leakage Detector. Easy-to-use, compact microwave leakage detector designed to measure high frequency radiation levels emitted from household and commercial microwave ovens. Complete with 9V battery.

Manufacturer: LATNEX Brand: LATNEX

Product Description: The HF-B3G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength, and is capable of measuring the frequency range of 50MHz~3.5GHz. -RF range: 38mV to 20V/M -Frequency range: 50MHz to 3.5GHz. -Sensors:Triple Axis (X,Y,Z) -Manual data memory (Max & AVG) records -Calibration factor,Alarm and Clock settings Applications:-RF power measurement for transmitters. -High frequency(RF)electromagnetic wave field strength measurement. -Mobile phone base station antenna radiation power density measurement -Spy camera,wireless bug finder -Wireless communication (CW,TDMA,GSM,DECT) applications -Wireless LAN (Wi-Fi) detection,installation -Cellular /Cordless phone radiation safety level -Microwave oven leakage detection -Personal living environment EMF safety Specifications: *Display type: Liquid-crystal (LCD),4-1/2 digits maximum reading 19999 *Measurement method:Digital,triaxial measurement *Directional characteristic: Isotropic, triaxial *Measurement range selection:one continuous range *Display resolution:0. 1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2 *Setting time: typically 1.5s (0 to 90% measurement value.) *Sample rate:1.5 times per second *Audible alarm: Buzzer *Units: mV/m,V/m,µA/m,mA/m,µW/m2, mW/m2,µW/cm2 *Display value: Instantaneous measured value, maximum value,average value, or maximum average value *Alarm function:adjustable threshold with ON / OFF *Calibration factor CAL:adjustable *Manual data memory and read storage:200 data sets *Battery life:Approximate 15 hours*Batteries: 9V NEDA 1604, IEC 6F22 or JIS 006P*Battery included: 9V battery x 1

Manufacturer: LATNEX Brand: LATNEX

The HF-B8G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength and is capable of measuring the frequency range of 10Mz~8GHz Features: • 10MHz to 8GHz Frequency range • For isotropic measurements of electromagnetic fields • Non-directional (isotropic)measurement with three-channel measurement sensor • High dynamic range due to three-channel digital results processing • Configurable alarm threshold and memory function(200 records) • Easy & safety to use • Low battery detector • Over load indication • Auto power-off with disable function Application: • High frequency (RF) electromagnetic wave field strength measurement • Mobile phone base station antenna radiation power density measurement • Wireless communication applications (CW, TDMA, GSM, DECT) • RF power measurement for transmitters • Wireless LAN (Wi-Fi) detection, installation • Spy camera, wireless bug finder • Cellular /Cordless phone radiation safety level • Microwave oven leakage detection • Personal living environment EMF safety Specifications: • Measurement ranges:38mV to 20V/m • Display:3-3/4 digits maximum reading 3999 • Frequency range:10MHz ~ 8GHz • Measurement units:mV/m , V/m , µA/m , mA/m , µW/m2 , mW/m2 , µW/cm2 • Display resolution:0.1mV/m, 0.01V/m, 0.1µA/m, 0.1mA/m, 0.001µW/m2, 0.01mW/m2, 0.001µW/cm2 • Alarm function:adjustable threshold with ON/ OFF • Memory Recall:Records Maximum & AVG • Calibration factor CAL:adjustable • Sampling Time:1.5 times per second • Operating:0 to 50ºC ( 32ºF to 122ºF ). Max. 80% RH • Operating Temperature and Humidity:0 to 50ºC ( 32ºF to 122ºF ). Max. 80% RH;Max. 80% RH • Power Supply:9V battery (NEDA 1604 IEC 6F 22 JIS 006P)*1 & DC adaptor

Manufacturer: LATNEX Brand: LATNEX

Product Description: The HF-B3G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength, and is capable of measuring the frequency range of 50MHz~3.5GHz. -RF range: 38mV to 20V/M -Frequency range: 50MHz to 3.5GHz. -Sensors:Triple Axis (X,Y,Z) -Manual data memory (Max & AVG) records -Calibration factor,Alarm and Clock settings Applications:-RF power measurement for transmitters. -High frequency(RF)electromagnetic wave field strength measurement. -Mobile phone base station antenna radiation power density measurement -Spy camera,wireless bug finder -Wireless communication (CW,TDMA,GSM,DECT) applications -Wireless LAN (Wi-Fi) detection,installation -Cellular /Cordless phone radiation safety level -Microwave oven leakage detection -Personal living environment EMF safety Specifications: *Display type: Liquid-crystal (LCD),4-1/2 digits maximum reading 19999 *Measurement method:Digital,triaxial measurement *Directional characteristic: Isotropic, triaxial *Measurement range selection:one continuous range *Display resolution:0. 1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2 *Setting time: typically 1.5s (0 to 90% measurement value.) *Sample rate:1.5 times per second *Audible alarm: Buzzer *Units: mV/m,V/m,µA/m,mA/m,µW/m2, mW/m2,µW/cm2 *Display value: Instantaneous measured value, maximum value,average value, or maximum average value *Alarm function:adjustable threshold with ON / OFF *Calibration factor CAL:adjustable *Manual data memory and read storage:200 data sets *Battery life:Approximate 15 hours

Manufacturer: Tenmars Brand: Tenmars

Features -Uses 3 internal orthogonal sensors to test a wide range of ELF magnetic fields, independent of measurement angle -The tester is designed to provide user a quick, reliable and easy way to measure magnetic field radiation levels around power lines, home appliances and industrial devices -The tester is a cost-effective hand-held instrument that was designed and calibrated to measure magnetic field radiation at different bandwidths from 30Hz to 2000Hz -Display micro Tesla (?T) or milli Gauss (mG) units -Data hold (HOLD), maximum hold (MAX) and minimum hold (MIN) functions -Auto range or Manual range select mode -Data logging capacity with memory size: 500 data sets -Time and Calendar function -Low battery indication -Over load display ("OL") -Auto power off function -Made in Taiwan Specifications -Display: 4 digits Triple LCD Display, maximum reading 9999 -Range: 20/200/2000 mG, 2/20/200 ?T -Resolution: 0.01/0.1/1 mG or 0.001/0.01/0.1 ?T -Frequency response: 30 Hz ~ 2000Hz -Sensor: Triple Axis (X, Y, Z) -Accuracy: 20 mG ¡Ó(3.0% + 30 digits) at 50Hz/60Hz or 3.0?T ¡Ó(3.0% + 30 digits) at 50Hz/60Hz -Overload: LCD display "OL" -Sample rate: 2.5 times per second -Battery: 1 x 9V Battery (not included) -Battery Life: approx. 100 hours -Operating Temperature: 5 ~ 40 ¢XC (41 ~ 104 ¢XF) -Operating Humidity: < 80% R.H. -Storage Temperature: -10 ~ 60 ¢XC (14 ~ 140 ¢XF) -Storage Humidity: < 70% R.H. -Dimension: approx. 173 (L) x 80 (W) x 32 (D) mm (6.81 x 3.15 x 1.26 inch) -Weight: approx. 230 g (8.11 oz) One Set Included -1 x EMF Tri-Axis Tester -1 x Carrying Bag -1 x Instruction Manual -Standard Factory Package