Power Meters - Page 10

Manufacturer: Telemecanique / Schneider Electric Brand: Telemecanique / Schneider Electric

This power meter helps to measure volts, amps, frequency, and power factor. This listing is for each. Technical Specification Item Power Meter Display LCD Mounting DIN Rail Input Voltage 90/600VAC/DC Amps 5 Accuracy +/- 0.50% Measures Power, Energy, Current, Voltage, Frequency Enclosure Rating Not Enclosed Hz 50/60 Meter Range 5 to 32, 000A Phase 3 Operating Temp. Range -30 Degrees to 70 Degrees C Height 3.60 Width 4.20 Depth 1.90 Standards ANSI Class 0.5S Features Pulse Out Only

Manufacturer: DENT Instruments Brand: DENT Instruments Model: CT-SCS-0050-U

Split-core current transformers provide linear output voltage that is directly proportional to the input current. These transformers are safely and easily installed over existing electrical power lines without disconnecting the lines or interrupting service. DENT’s energy monitoring components are used for a variety of applications including building automation, tenant sub metering, performance verification, energy management, and new technology assessment. Ratio Error

Manufacturer: Dranetz Brand: Dranetz Model: BP-PX5

Battery PackFor Use With Mfr. DBPX108, DBPG106, DBPV500, DBPV10, DBPVFLEX, DBMP1, Features Replacement, 7.2 VDC, 2.7A/hr

Manufacturer: Red Lion Brand: Red Lion

Red Lion IMI04162 Rate Meter W/ Alarm, 115/230VAC, 5A 24VDC, 6-Digit, Red LED

Manufacturer: Hioki Brand: Hioki Model: 9730

Carrying case for optical power meter. 1 year warranty.

Manufacturer: TED Brand: The Energy Detective Model: Spyder 200-S

This TED Spyder 200-S with SPLIT-CORE 200A CTs makes for easier installation than donut-style CTs. Eliminates the need for disconnecting conductors from the breakers. If you are purchasing or have purchased a TED Pro Package that included a MTU, you will not need to purchase an additional MTU to use the Spyder. Note that each MTU can accommodate up to two Spyders.

Manufacturer: Oscium Brand: Oscium Model: WiPry-Pro Combo Color: Black

Use your iPhone, iPod and iPad to make power and frequency measurements. All the measurement capabilities you need for RF communication design and wireless network integration fit in the palm of your hand with WiPry-Pro Combo. Measure rise and fall time, duty cycle and peak power with WiPry-Pro Combo's precision power meter. Switch to spectral mode to examine the 2.4GHz ISM band used by Wi-Fi, Zigbee, Bluetooth and remote sensor networks. SSID's / RSSI are also available. WiPry-Pro Combo is the emerging standard in handheld RF test equipment for cellular communication planners, RF engineers, wireless network technicians and avid electronics hobbyists. Just like oscilloscopes that measure analog and digital voltages, WiPry-Pro Combo captures time based peak RF power. Analyze measured signals for pulse width, duty cycle, and settling time performance. In addition to peak power, WiPry-Pro Combo also lets you measure key parameters like peak-to-average power ratio. These measurements, essential for verifying signals, are compliant with regulations and measuring transmission efficiency. Switch to spectrum mode and spectral content can be viewed between 2.4 GHz and 2.495 GHz. The intuitive interface lets you see all Wi-Fi channel activity. Just touch the screen and slide your finger left and right to view channel activity. WiPry lets you adapt the Real Wave spectrum analysis to suit your application. Choose from six measurement visualizations, including Max Hold, Raw, Average, and Heat Map. Spectrum analysis can also be viewed over time using the waterfall option. WiPry-Pro Combo works on the following generations of iPhone, iPad, and iPod touch devices: iPad Pro, iPad 4, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad mini, iPod touch (5th generation), iPhone 6S Plus, iPhone 6S, iPhone 6 Plus, iPhone 6, iPhone 5, iPhone 5S, iPhone 5C. WiPry-Pro Combo is built to support the lightning connector natively.

Manufacturer: DENT Instruments Brand: DENT Instruments Model: CT-RMV-72-6000-U

DENT's RoCoil line of Rogowski Coil CTs offer significant advantages over conventional Split Core or Clamp-On CTs in certain installations. These "rope-style" Current Transformers deliver "installer-friendly" features such as large window size, light weight, wide current range, and mechanical flexibility for mounting in tight quarters. RoCoils provide accurate, non-intrusive measurement of AC current combined with easy placement around cable bundles, large bus bars and irregular shaped conductors. They are available in two models: RoCoil and RoCoil mV . See the details of each below.Like its name implies, the RoCoil mV produces a millivolt output for use with power meters without a built-in amplifier/integrator circuitry. These CTs are available in standard lengths up to 72" and current ranges up to 6000A AC. The RoCoil mV requires 5-24V DC for operation, which can be supplied from a Line-Powered ELITEpro or optional external pow.

Manufacturer: Veris Brand: Veris

Bi-Directional Power and Energy Meter, Alarm Output (N.C.), 1 Pulse Output (N.O.), RS-485 Serial Modbus RTU Protocol, 5-Year Warranty

Manufacturer: Dranetz Brand: Dranetz Model: DRANFLEX300MHB8

Flexible Probes are available in three lengths 24 inches, 36 inches, and 48 inch lengths and available in two maximum ranges of 3000 A RMS and 6000 A RMS. Each probe can be powered by battery or AC adapter and multiple probes can be powered by a single AC adapter. Flex probes are available as separate probes, or as four phase packages, which include power supply. All Flexible Probes listed here are compatible with Dranetz portable instruments: PowerXplorer, PowerGuide, PowerVisa, PowerGuia, Energy Platform, PP4300, 658 with CA4300 adapter; and Dranetz permanent instruments: Encore 61000 with 61MAC module, Signature System 5513. Adapters are available for use with other instrument configurations; contact us for details. Dranetz recommends only Dranetz-brand probes be used with Dranetz power quality equipment