Power Meters - Page 2

Manufacturer: Seaward Brand: Seaward Solar Model: 396A961

The Seaward Solar Power clamp is a feature packed Power Analyzer designed to enable maintenance, troubleshooting and efficiency measurements on PV Systems. The power clamp simplifies and speeds up the process of determining the efficiency of PV systems. The instrument can measure the current on both the AC and DC side of the inverter, giving a true RMS reading of the power whilst the system is still operational.

Manufacturer: B&K Precision Brand: B&K Precision Model: 9129B

The 9129B is an economical triple output linear programmable DC power supply featuring isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current. Additionally, this supply can operate in tracking mode with user-configurable ratios between channels. The front panel keys and rotary knob with convenient cursors let users quickly set voltage and current values. Up to 27 different instrument settings can be saved and recalled. The power-on state of the outputs can also be configured. The USB to TTL interface supporting SCPI commands can be used to remotely control the power supply via a PC. Alternatively, users can control the 9129B, execute test sequences or log measurements using the provided PC software application. This software also integrates with Data Dashboard for LabVIEW apps enabling iOS, Android, or Windows 8 compatible tablets or smartphones to remotely monitor select measurement indicators.

Manufacturer: BK Precision Brand: B&K Precision Model: 9201

The Model 9201 can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, this multi-range power supply automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits. For benchtop applications, the 9201 provides a numerical keypad for direct data entry along with convenient cursors and analog style knobs to quickly make incremental voltage or current changes. System integrators benefit from the standard USB (USBTMC-compliant), RS-232, and GPIB interfaces supporting SCPI commands.

Manufacturer: Hioki Brand: Hioki Model: 3286-20

The Hioki 3286-20 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, and power in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 55mm (2.17 inches) in diameter or a busbar up to 80 x 20mm to measure current without touching or interrupting the circuit. A voltage cord with alligator clips is included for measuring AC voltage to 600V, frequency up to 1,000Hz (hertz), single-phase power to 600kW (kilowatts), and three-phase power to 1,200kW. Frequency can also be measured with the clamp. For power monitoring and analysis, the meter detects phase rotation, measures THD (total harmonic distortion) which can degrade the quality of the power being supplied by the system, analyzes individual harmonics to the 20th order, and calculates power factor up to 1.00 to determine how efficiently an installation uses power.The meter has push buttons to select the property to measure, and a 6,000-count LCD. To enable readings of rapidly fluctuating current and voltage, the slow function reduces the display update rate from four times per second to once every three seconds. The record function captures the maximum, minimum, and average readings for a property. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on a single 9V battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating ran...

Manufacturer: Amprobe Brand: Amprobe Model: SOLAR-600

The Amprobe solar power analyzer evaluates the energy output, efficiency, and placement of solar panels, helps determine the proper inverter size in solar power systems, and identifies malfunctioning cells on solar panels. It measures maximum power (Pmax), maximum voltage at maximum power (Vmaxp), maximum current at maximum power (Imaxp), voltage at open circuit, voltage present in system, current at short circuit, and percent efficiency to determine the actual power output of a solar panel in normal operating conditions. The operator can choose between an auto scan mode, for an overview of the power characteristics of a solar panel, and a manual scan mode, for focusing on a particular operating range or single test point for measurements.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4276687

The Fluke Power Logger is the ideal electrician or technician’s power meter for conducting energy studies and basic power quality logging. Set the Power Logger up in seconds with the included flexible current probes and color display. The power quality meter measures most electrical power parameters, harmonics, and captures voltage events.

Manufacturer: Lascar Brand: Lascar Model: V 125

The V 125 is a very low cost 3½ digit LCD voltmeter with 12.5mm (0.5") digit height, intended for high volume OEM applications. It features 200mV D.Sc. full scale reading, auto-zero and auto-polarity. The meter plugs directly into a SIL socket or can be panel mounted using the bezel provided. Connection to the meter is via one row of 8 pins.

Manufacturer: Oscium Brand: Oscium Model: Conducted Measurement Kit

Two additional external triggers are available for purchase to enhance the functionality of WiPry-Pro Combo. This kit allows you to trigger on non-RF related events. Conducted measurements can also be made using the SMA and RP-SMA adapters. The following are included in the optional kit: three custom SMD Grabbers, Harness, Gold-plated SMA Adapter, and Gold-plated RP-SMA Adapter.

Manufacturer: TED Brand: The Energy Detective Model: 5000 MTU/CT

Measuring Transmitting Unit (MTU) with two Current Transformers (CTs) for use with a breaker panel or subpanel, to measure individual breakers, or if you've added a wind or solar installation. Package includes cord to connect the MTU into the breaker panel. You MUST have a Gateway in order to receive measurements from the MTU/CT set. TED 5000 models come with one gateway that will support a maximum of 4 MTU/CTs which can always be added later.

Manufacturer: Lascar Brand: Lascar Model: SGD 35-M-420

The SGD 35-M is a Panel Pilot Compatible graphics display with a 320 x 240 pixel (QVGA) color display and USB programming interface. Using the Panel Pilot software (available for Windows XP, Vista and Windows 7), users are able to choose from an ever-increasing number of configurations (six voltmeters at launch) which can then be customized to their needs. Colors, text labels, splash screen and input scaling can all be customized by the user through the software and then uploaded to the SGD 35-M through the USB connection.