|
|
-
3.7 of 5.0 with 41 Reviews
SALE PRICE: $336.00
Manufacturer: TTi
Brand: TTI
Model: DMM1604-AIM-TTI INSTRUMENTS
Manufacturer: TTi
Brand: TTI
Model: DMM1604-AIM-TTI INSTRUMENTS
|
TTi 1604 Digital Multimeter × TTi 1604 Digital Multimeter HIGHLIGHTS: ACCURACY 0.08%; RESOLUTION 10μV 10m and 0.1μA TRUE PMS AC FUNCTIONS  TTi 1604 Digital Multimeter   Model 1604 - 40,000 Count Bench Multimeter × Model 1604 - 40,000 count bench multimeter  A Value-For-Money DMM The 1604 is a low-cost auto/manual ranging bench-top DMM with a large and bright LED display. It offers 4¾ digit (40,000 count) scale length, true RMS ac measurements, a basic accuracy of 0.08% and a resolution of 10μV, 10m and 0.1μA.  A Substantial Bench-top instrument The 1604 is a robust mains-powered bench-top instrument. Unlike a hand-held multimeter it stays where you put it even with heavy test leads connected. The multi-position tilt stand ensures that the large display is always readable.  Smart Functions The 1604 incorporates several "smart" functions such as Relative measurement and Minimum-Maximum storage. The T-Hold function enables readings to be held on the display automatically each time a new test point is probed.  True RMS ac Ranges All AC measurements on the 1604 are True RMS. This avoids the errors on non-sinusoidal waveforms associated with other multimeters. Good ac bandwidth enables measurement within the audio band and ensures that higher frequency components of switching waveforms are included within the measurement result.  Frequency Measurement The 1604 has a frequency function which can be selected on any ac range in order to measure the frequency of the signal. Frequencies up to 40kHz can be measured and the maximum resolution is 0.1Hz.  Isolated RS-232 interface The 1604 is fitted with an isolated RS-232 interface. This permits remote control and data-logging to disk using optional Windows based software.
-
3.7 of 5.0 with 41 Reviews
SALE PRICE: $336.00
Manufacturer: TTi
Brand: TTI
Model: DMM1604-AIM-TTI INSTRUMENTS
Manufacturer: TTi
Brand: TTI
Model: DMM1604-AIM-TTI INSTRUMENTS
|
TTi 1604 Digital Multimeter × TTi 1604 Digital Multimeter HIGHLIGHTS: ACCURACY 0.08%; RESOLUTION 10μV 10m and 0.1μA TRUE PMS AC FUNCTIONS  TTi 1604 Digital Multimeter   Model 1604 - 40,000 Count Bench Multimeter × Model 1604 - 40,000 count bench multimeter  A Value-For-Money DMM The 1604 is a low-cost auto/manual ranging bench-top DMM with a large and bright LED display. It offers 4¾ digit (40,000 count) scale length, true RMS ac measurements, a basic accuracy of 0.08% and a resolution of 10μV, 10m and 0.1μA.  A Substantial Bench-top instrument The 1604 is a robust mains-powered bench-top instrument. Unlike a hand-held multimeter it stays where you put it even with heavy test leads connected. The multi-position tilt stand ensures that the large display is always readable.  Smart Functions The 1604 incorporates several "smart" functions such as Relative measurement and Minimum-Maximum storage. The T-Hold function enables readings to be held on the display automatically each time a new test point is probed.  True RMS ac Ranges All AC measurements on the 1604 are True RMS. This avoids the errors on non-sinusoidal waveforms associated with other multimeters. Good ac bandwidth enables measurement within the audio band and ensures that higher frequency components of switching waveforms are included within the measurement result.  Frequency Measurement The 1604 has a frequency function which can be selected on any ac range in order to measure the frequency of the signal. Frequencies up to 40kHz can be measured and the maximum resolution is 0.1Hz.  Isolated RS-232 interface The 1604 is fitted with an isolated RS-232 interface. This permits remote control and data-logging to disk using optional Windows based software.
-
3.7 of 5.0 with 40 Reviews
SALE PRICE: $349.99 1% OFF
Manufacturer: UNI-T
Brand: UTD2062CE
Manufacturer: UNI-T
Brand: UTD2062CE
|
1ã€Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; 2ã€Storage of waveforms setups and interfaces waveforms and setups reproduction; 3ã€Automatic measurement of 28 waveform parameters; 4ã€Unique waveform recording and replay function; 5ã€Edge,Pluse,Video,Alternate trigger functions; 6ã€Unique Pass/Fail functions; 7ã€Multilingual menu displays. Specification:UTD2062CE Channels:2 Bandwidth:60MHz Sample Rate:1GS/s Rise Time:≤5.8ns Memory Depth:25kpts Waveform Acquisition Rate:≥2000wfms/s Vertical Sensitivity:2mV/div~5V/div Timebase Range:5ns/div~50s/div Storage:Setup, Wave, Bitmap Trigger Modes:Edge, Pluse, Video, Alternate Interface:USB Device, USB Host, Pass/Fail General Characteristic Power:100-240VAC, 45-440Hz Display:5.7 Inches 64K Color TFT LCD, 320×240 Product Color:White and Gray Product Net Weight:2.5 Kg Product Size(W×H×D):320mm ×150mm ×130mm Standard Accessories:Probe×2 (1×,10× switchable),Power Cord,USB Cable,PC Software CD
-
3.7 of 5.0 with 2 Reviews
SALE PRICE: $358.00
Manufacturer: Siglent
Brand: Siglent
Model: SDG1000 Series
Manufacturer: Siglent
Brand: Siglent
Model: SDG1000 Series
The SDG1000 series of high-performance function/arbitrary waveform generators use direct digital synthesis (DDS) technology and can generate accurate, stable, clean and low distortion output signals. It provides fast rising and falling edge square waves. The SDG1000 series provides a user-friendly graphical interface that can help you complete tasks faster and greatly improve your work efficiency. It has dual-channel output and each channel can output waveforms. Features 125 MSa/s sample rate, 14 bit vertical resolution, 16 Kpts memory Outputs 5 types of standard waveforms, 48 internally stored waveforms Includes built-in high precision, 200 MHz frequency counter Multiple modulation functions, sweep-frequency function, pulse train function Standard PC connections: USB Device, USB Host, support U Disk storage and software Can seamlessly connect to the SDS1000 series digital oscilloscopes and supports remote command control
-
3.7 of 5.0 with 17 Reviews
SALE PRICE: $379.99 14% OFF
Manufacturer: Hantek
Brand: Hantek6102BE
Manufacturer: Hantek
Brand: Hantek6102BE
Channel:2 Channels Bandwidth:100MHz Input Impandence:1MΩ 25pF Max. Sample rate:250MS/s Vertical resolution:8Bit Gain range:20mV-5V, 8Steps DC accuracy:±3% Coupling:DC Timebase range:1ns-9000s, 39 Steps Vertical adjustable:Yes Input protection:Diode clamping X-Y:Yes Trigger Mode :Auto, Normal and Single Trigger Slope :+/- Trigger level adjustable:Yes Trigger Type:Rising edge, falling edge Trigger Source:CH1, CH2 Pre/Post trigger:0-100% Sampling selection:Yes Waveform Display:port/line, waveform average, persistence, intensity Network:Open/Close Vertical mode:CH1, CH2, Dual, ADD Cursor measurement:Yes Math:FFT, addition, subtraction, multiplication, division. Cursor:Frequency, Voltage Accessories:S/W CD, probes, manual, USB cord 3.Software Operating system: Windows 7, Windows NT, Windows 2000,Windows XP, VISTA 4.Second Design Supply DEMO code(VCã€VBã€LABVIEW) and technical support. Dimensions (mm):205(L) x120(W) x35(H), be carried easily.
-
3.7 of 5.0 with 39 Reviews
SALE PRICE: $382.49 1% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 4112745
Manufacturer: Fluke
Brand: Fluke
Model: 4112745
Models covered: • Fluke 568 Infrared and Contact Thermometer • Fluke 568 Ex Intrinsically Safe Infrared Thermometer.
-
3.7 of 5.0 with 12 Reviews
SALE PRICE: $389.99
Manufacturer: UNI-T
Brand: UNI-T UTD1025DL
Manufacturer: UNI-T
Brand: UNI-T UTD1025DL
|
Product Features: 1〠Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference; 2〠Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component; 3〠Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div; 4〠Isolated USB for much safer communication; 5〠White and black display for your option, perfect for use outdoors with strong light; 6〠Intelligent local or network software update; 7〠More than 6 hours of continuous battery operation. Specification:UTD1025DL Channels:2 Bandwidth:25MHz Sample Rate:250MS/s Rise Time:≤14ns Memory Depth:12kpts Vertical Sensitivity:5mV/div~20V/div Timebase Range:10ns/div~50s/div Storage:Bitmap, Setup, Waveform Trigger Modes:Edge, Pulse, Video, Slope Interface:Mini USB Multimeter Specifications DC Voltage (V) 400.0mV/ 4.000V/ 40.00V/ 400.0V AC Voltage (V) 400.0mV/ 4.000V/ 40.00V/ 400.0V DC Current (A)(External Convertor):400.0μA/ 4000μA ;40.0mA/ 400mA;4A AC Current (A)(45Hz~400Hz) (External Convertor) 400.0μA/ 4000μA; 40.0mA/ 400mA; 4A Resistance (Ω):400.0Ω/4.000kΩ/40.00kΩ/400.0kΩ/4.000MΩ ; 40.00MΩ Capacitance (F) :51.20nF/512.0nF/5.120μF/51.20μF/100μF Display Count:4000 General Characteristic Power:Lithium Battery: 7.4V 3600mAh; DC Adapter: 100~240V 50/60Hz input, 9V 4A Output LCD Size:3.5 Inches 64K Color TFT LCD, 320×240 Product Net Weight:0.9 Kg Standard Accessories:DC Adaptor, Test Lead, Probe×2 (1×,10× switchable), (Current-to-Voltage Convertor)×2,Power Cord, USB Cable,PC Software CD
-
3.7 of 5.0 with 4 Reviews
SALE PRICE: $438.50 60% OFF
Manufacturer: Tektronix
Brand: Tektronix
Model: TDS2001C
Manufacturer: Tektronix
Brand: Tektronix
Model: TDS2001C
The Tektronix TDS2001C 50 MHz, 2 Channel, 500MS/s Digital Storage Oscilloscope provides you with afford able performance in a compact design. Packed with standard features - including USB connectivity, 16 automated measurements, limit testing, datalogging, and context-sensitive help- the Tektronix TDS2001C oscilloscopes help you get more done, in less time. With up to 200MHz bandwidth and 2GS/s maximum sample rate, no other digital storage oscilloscope offers as much bandwidth and sample rate for the price.The Tektronix TDS2001C proprietary sampling technology provides real-time sampling with a minimum of 10X over sampling on all channels, all the time to accurately capture your signals. Sampling performance is not reduced when using multiple channels.
-
3.7 of 5.0 with 42 Reviews
SALE PRICE: $451.00 1% OFF
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
The METRAHit 1 ASI is an easy-to-operate addressing and diagnosis device for active AS-i modules and intelligent sensors and actuators in accordance with AS-i version 2.1 including extended addressing mode.
-
3.7 of 5.0 with 3 Reviews
SALE PRICE: $458.00 5% OFF
Manufacturer: Rigol
Brand: Rigol
Model: DS1102E+DSOCase
Manufacturer: Rigol
Brand: Rigol
Model: DS1102E+DSOCase
|
The Rigol DS1102E oscilloscope is one of the most popular 100 Mhz oscilloscopes if not the most single popular 100 Mhz oscilloscope in the USA in 2013. This unit has countless reviews online and many reviews on this page from our customers. You cant go wrong after reading all the reviews and feedback from customers. Five years ago a scope like this was unheard pf for sub 1000 dollars prices. Now this unit is 399 with free shipping. The unit also comes with 1 MP of memory. This is huge and extremely useful! The ds 1102e is a website best seller. To get this distiction it has to be one of the most popular scopes we sell. This Rigol DS1102E Model is an economical digital oscilloscope with high-performance, which is designed with dual channels and 1 external trigger channel. It provides 20 types of wave parameters for automatically measuring, which contains 10 Voltage and 10 Time parameters. In cursor mode, users can easily measure by moving cursor. Besides, 3 types of cursor measurement are optional: Manual, Track and Auto. This DS1102E DSO provides powerful PC application software: UltraScope, which enables to: Capture and measure wave; Perform local or remote operation; Save waves as ".bmp" format; Save files as ".txt" or ".xls" format; Print waveforms
|
|