Oscilloscopes & Accessories - Page 4

Manufacturer: Test Products International, Inc Brand: TPI Model: SP200B Color: Red

The SP series probes are available in switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup. The probe should have sufficient bandwidth and rise time for the test instrument and application. For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes. Logic signal and waveform tests. Measure voice / data signals. Analyze power quality. Test motor control circuits. Attenuation: x1 to x10. Cable length: 1.2m. Input impedance: 1 to 10 Megaohms R; 47 to 15pF L. compensation range: 10 to 30pF. IEC1010: CAT II.

Manufacturer: GABOTRONICS Brand: GABOTRONICS

XMEGA Xminilab Plug-in Mixed Signal Oscilloscope The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.Features:Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signalsAdvanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger levelMeter Mode: Average, Peak to peak and Frequency readoutXY Mode:           Plot Lissajous patterns           See the phase difference between two waveformsSpectrum Analyzer with different windowing options and selectable vertical logHorizontal and Vertical Cursors with automatic waveform measurementsArbitrary Waveform Generator with Sweep on all parametersDisplay options: Persistence, Different grid options, and moreIncludes: Two 10-pin headersSpecifications:General Specifications:ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROMGraphic OLED display 2.42", 128x64 pixelsModule size: 3.3" x 1.75"PDI interface4 tactile switchesUSB connectivity: Windows, Linux, Mac, AndroidLogic Analyzer specifications:8 Digital Inputs, 3.3V levelMaximum sampling rate: 2MSPSFrequency counter: 16MHzProtocol Sniffer: UART, I2C, SPIInternal pull up or pull downBuffer size: 256Oscilloscope specifications:2 Analog InputsMaximum Sampling rate: 2MSPSAnalog Bandwidth: 200kHzResolution: 8bitsInput Impedance: 1MΩBuffer size per channel: 256Input Voltage Range: -14V to +

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9081/001

Dual banana plug 4mm male to female BNC adapter. Consists of two adapters. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: 5th Postulate Engineering Brand: 5PE

P4100 100MHz 2kV Oscilloscope Probe Attenuation Ratio: x100, Input Resistance(MΩ): 100 Input Capacitance: 6pF Compensation Range: 10pF-35pF Bandwidth: 100MHz Rise time: 3.5ns Working Voltage: 2000(Vp-p) Net Weight: 55g Cable Length:110cm Package Includes: 1X Probe Rod 1X Probe Tip 1x Ground Spring 1X Tip Locating sleeve 4X Marker Rings 1X Screwdriver

Manufacturer: Owon Brand: OWON Model: 01B35

Owon brand Multimeter b35t model, the world's first with Bluetooth interface for datalogger, up to 2 samples per second. Edgy, elegant, robust and functional design. It has temperature measurement with Type K thermocouple (included). the Android app can read more than one meter, which represents an advantage to analyze complex systems. This is a Multimeter of the best quality and with the greatest functionality available in the market at the best price. Main features - function as 3 in 1 : datalogger + Multimeter + temperature meter - multi-connection (more than one device) supported via mobile app - the change trend analysis accessible via special Chart mode - voice warning supported, which assures measurement Safety - SMART voice-reading accessible - 3(5/6)-digit full scale reading, achieving higher measurement accuracy than 3(3/4)-digit counterparts - larger display, easier data-reading; simulated bar Chart comes as an added option - backlit-powered screen, more suitable for Dark measurement environment - SMART power-off option extending battery life.

Manufacturer: Rigol Brand: Rigol Model: BAG-DS1000

Rigol BAG-DS1000 Instrument Carry Case for a DS1000 Series Oscilloscope. (For DSA800s, DS1000B and DS2000-series, the larger BAG-G1 is recommended to ensure good fit with the required padding.)

Manufacturer: Test Products International, Inc Brand: TPI Model: SP250B

The SP series probes are available in switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup. The probe should have sufficient bandwidth and rise time for the test instrument and application. For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes. Logic signal and waveform tests. Measure voice / data signals. Analyze power quality. Test motor control circuits. Attenuation: x1 to x10. Cable length: 1.2m. Input impedance: 1 to 10 Megaohms R; 47 to 14pF L. compensation range: 10 to 30pF. IEC1010: CAT II.

Manufacturer: JYE Tech Brand: JYETech Model: DSO112

Major featurs of DSO112: 2.4" color TFT LCD with 320 x 240 resolution Analog bandwidth: 0 - 2MHz Sampling rate: 5Msps max Sensitivity: 5mV/Div - 20V/Div Sensitivity error: < 5% Timebase: 1us/Div - 50s/Div Record length: 512/1024 points Built-in test signal with multiple frequency USB connection Upload of captured raw data as CSV file Battery/USB powered 3.7V Li-ion battery/USB Supply Current: 300mA @ 3.7V(LCD backlight ON). Built-in charger

Manufacturer: Test Products International, Inc Brand: TPI Model: SP300B

The SP series probes are available in switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup. The probe should have sufficient bandwidth and rise time for the test instrument and application. For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes. Logic signal and waveform tests. Measure voice / data signals. Analyze power quality. Test motor control circuits. Attenuation: x1 to x10. Cable length: 1.2m. Input impedance: 1 to 10 Megaohms R; 47 to 13pF L. compensation range: 10 to 30pF. IEC1010: CAT II.

Manufacturer: Velleman, Inc Brand: Velleman Model: EDU08

Build your own oscilloscope and learn How to visualize signals. See the signals you learn about in real life! despite the low cost, this oscilloscope has a lot of features found only on expensive units like signal markers, frequency, dB, true rms readouts,. a powerful auto-setup function will get you going in a snap! note: this scope cannot be used to perform measurements on voltages higher than 30Vpp.