Oscilloscopes & Accessories - Page 5

Manufacturer: Hantek Electronic Co.,Ltd Brand: Hantek Model: HT 306

This break-out leads set allows a Oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors. Each lead has six blades wired to six sockets, allowing you to insert it between a plug and socket pair, other end are six 'banana' (4 mm) sockets. With these 6-way leads, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.The 6-way Universal Breakout Leads are designed for use with Hantek 300 serials automotive oscilloscopes but you can use it with other makes, including Pico as well.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4358028

The Fluke 4358028 hanger kit for the Fluke 1730 three-phase energy logger enables the operator to hang the meter, power supply, or both from any magnetic surface for hands-free use (meter sold separately). The hanger has two magnets to hang the meter with the power supply attached, the meter itself, or the power supply itself. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.What's in the Box?Velcro strapTwo magnetsHanger

Manufacturer: LH Brand: Unknown

P6300 300MHz Oscilloscope probes, (pair) Attenuation ratio: 1:10 (1X & 10X) Input Resistance: 1M:10M Bandwidth: 300MHz Rise Time: 1.15ns Input Capacitance:1M 85pF~115pF, 10M 18.5pF~22.5pF Compensation Range: 15pF-40pF Working Voltage:1X:

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: Fluke Brand: Fluke Model: C3004IND

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Signstek Brand: Signstek

Description: Signstek Protable Nano ARM DSO202 is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is has a dual trace three lines, new kind of system interface, capacitive convenient operation. You can easily operate it with the gestures of one-click, double-click, press and slide. The Aluminum shell is very fashionable. It is equipped with 320*240 color display, 8M Memory Card (U Disk), and chargeable Lithium batteries. The thickness is 11mm only! The volume is small enough to take it anywhere. It can meet the demands in many fields, such as, school experiment, electronic repairing and electric engineering. Specification - Analog bandwidth: 1MHz - Max sample rate: 10MHz - Sample memory depth: 8K - Analog Input impedance: 1MΩ - Max input voltage:±40v (×1 probe) - Coupling: AC/DC - Analog input sensitivity: 10mV/Div~10V/Div (1-2-5 Step) - Vertical position: Adjustable with indicator - Horizontal sensitivity: 1uS/Div~10S/Div (1-2-5 Step) - Horizontal position: adjustable with indicator - Independent Channel Display:-A,-B, A+B, A-B, RecA, RecB - Trig modes: Auto, Norma, Single, None and Scan - Rising/falling edge trigger ,Maximize/Minimize level trigger - Automatic measurement: frequency, cycle, duty, peak/effective/Maximum/Min/average NO.of Voltage - Test signal: Built-in 10Hz~1MHz or 10~20kHz Analog sine wave/ Triangle wave/ Sawtooth Wave - Waveform storage: 8MB Memory - Built-in: 600mAh Chargeable Lithium battery / USB - Color TFT LCD display Resolution: 320×240 - Input: Capacitive touch and slide gesture - Dimension: 100mm X 56mm X 10mm Package List 1 x DSO202 Digital Oscilloscope Device 1 x Probe 1 x Mini USB Cable 1 x Flannel bag 1 x Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: L215

SureGrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders. TP220 SureGrip test probes. TL224 SureGrip silicon test lead set. Foldable soft pouch with six pockets and hook-and-loop.

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9091/001

The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 1.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.

Manufacturer: Signstek Brand: Signstek

Product Description: DSO201 Pro Nano V3 is an upgraded version 32bit digital storage oscilloscope. Based on ARM -M3, it's equipped with 320*240 color display, USB port and recharging function. It's compact, simple to operate; meets the basic demands of school lab, electric furniture repairmen and electric engineering. The version 3 of DSO Nano differs from version 2 in that it does not use white plastic shell. Instead, it uses black metal shell which is more durable and strong. Product Specification: Display: 2.8′ Color TFT LCD Display Resolution: 320×240 Display Color: 65K Analog bandwidth: 0 - 1MHz Max sample rate: 1Msps 12Bits Sample memory depth: 4096 Point Horizontal sensitivity: 1uS/Div～10S/Div (1-2-5 Step) Horizontal position: adjustable with indicator Vertical sensitivity: 10mV/Div～10V/Div (with ×1 probe); 0.5V/Div～10V/Div (with ×10 probe) Vertical position: Adjustable with indicator Input impedance: >500Kω Max input voltage: 80Vpp (by ×1 probe) Coupling: DC Trig modes: Auto, Norma, Single, None and Scan Test signal: Built-in 10Hz～1MHz (1-2-5 Step) Upgrade: By bootloader via USB Power supply: 3.7V Chargeable Lithium battery / U SB Dimension (w/o probe): 105mm X 53mm X 8mm PC connection: Mini USB B-Type Our Guarantee If you have any questions about the product you got, please feel free to contact with us at any time, we'll provide our best service to you and do our best to resolve the problem you met. Package 1 x DS0201 Digital Oscilloscope Device 1 x Probe (x1/x10) 1 x Mini USB Cable 1 x Flannel bag