Function Generators - Page 6

Manufacturer: Icstation Brand: Generic Model: AD9833 DDS Signal Generator

This DDS signal generator module is equipped with AD9833 waveform generator chip can output 0-12.5MHz sine square and triangle wave. On-board 25MHz crystal and 300M high speed amplifier ensure 0.1Hz stepping accuracy supporting original and 5 gain signal dual channel output through SMA connector with low pass filter function. It support software program the output frequency and phase and compatible with STM32,SMT8,STC commonly used MCU. Specifications Chip: AD9833 Frequency: 0-12.5MHz Accuracy:0.1Hz Output Impedance: 50ohm Working Voltage: DC 2.3-5.5V Board Size: 32 X 32mm/1.26 X 1.26inch(L*W) Specifications 1X AD9833 0Hz-12.5MHz DDS Signal Generator Module Sine Square Triangle Wave

Manufacturer: Thaikits Brand: Thaikits

- Require Power supply 12VAC or 12VDC - 1 Channel - 3 Ranges of Frequency by selector switch 1: 1-100Hz 2: 100-10kHz 3: 10kHz-600kHz NOTE: 20KHz max for TTL output port. Duty cycle cannot be adjust there are 50% - 60% depend on the frequency - 3 signal output port 1: TTL (4.48Vrms) 2: Square (10.2Vms) 3. Sine (Vmax = 1Vrms)/ Triagle (Vmax = 1.9Vrms) - 2 Pots on board 1: Adjust an amplitude of Sine / Triagle [ Amplitude of square and TTL port can not be adjust ] 2: Adjust the frequency - PCB size : 5.2" x 2.42" - Comes with the schematic and part list

Manufacturer: HP Brand: HP

List of compatible models includes: DDS2 3.5" Int Tape Drive (OEM 1050)

Manufacturer: Atc Brand: Applied Materials (Amat)

Cap Fix 3.6Kv 80Pf 5% Rf Porc

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Cable Assembly, Rf Match To Hv Module, 3

Manufacturer: GW Instek Brand: GW Instek Model: AFG-2105

The AFG-2100 Series arbitrary function generator is a DDS (direct digital synthesized) based signal generator designed to accommodate the educational and basic industrial requirements for an accurate and affordable signal Source, 100 MHz Bandwidth covering the output of sine, square (pulse), ramp (triangle), noise and arbitrary waveforms. The 20m sa/s sampling rate, 10 bit vertical resolution and 4K point memory of the AFG-2100 series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1hz resolution of sine, square and triangle waveforms and the 1 percent to 99 percent adjustable duty cycle of square (pulse) waveform are the remarkable features to greatly extend its application range in various fields. Waveform parameter setting through numeric keypad entry and knob selection. Amplitude, DC offset and other key setting information shown on the 3-1/2" LCD screen simultaneously. USB device interface for remote control and waveform editing. AM/FM/FSK modulation, sweep, and frequency counter functions. Measures 266mm width by 107mm height by 293mm depth.

Manufacturer: Eaton Brand: Eaton

High Power Coaxial, Rf Cable 18.99, 19Ft Long

Manufacturer: GW Instek Brand: GW Instek Model: AFG-125P

GW Instek launches the brand new AFG-100/200 series 25MHz USB modular arbitrary function generator with four models for selections. The AFG-100/200 series arbitrary function generator with many unique features such as light weight, handy, and USB interface compatible is an ideal choice for the applications at the general laboratories in applying stand-alone operation or collocation with the GDS-2000A series digital oscilloscope. The main features of the AFG-100/200 series are output amplitude of 2.5Vpp (connecting with a load of 50 ohms), frequency range reaching 25MHz, frequency resolution of 1uHz, and built-in sine waveform, square waveform, triangle waveform, and noise signal. Square waveform can adjust the duty cycle from 1% to 99% and it can be utilized as pulse signal. Users, via the GDS-2000A FG APP, can select from the 66 built-in function waveforms to conduct arbitrary waveform editing. The AFG-100/200 series, with functions of AM/FM/PM/FSK/SUM modulation, frequency sweep, burst and coupling, is suitable for various communications applications.The AFG-100/200 series collocates with the FG APP of GDS-2000A digital oscilloscope through USB interface. While conducting stand-alone operation, the AFG-100/200 series utilizes USB interface, which allows users to quickly set up their required tests by the simple connection feature. AWES (arbitrary waveform editing software) PC software is provided to enter settings speedily and easily for measurement. Users can select required waveforms from arbitrary waveform editor.

Manufacturer: GW Instek Brand: GW Instek Model: AFG-2005

The AFG-2000 Series arbitrary function generator is a DDS (direct digital synthesized) based signal generator designed to accommodate the educational and basic industrial requirements. The 20m sa/s sampling rate, 10 bit vertical resolution and 4K point memory of the AFG-2000 series provide user with a flexible environment for creating the specific waveform output as needed. Waveform parameter setting through numeric keypad entry and knob selection. Amplitude, DC offset and other key setting information shown on the 3-1/2" LCD screen simultaneously. USB device interface for remote control and waveform editing. Measures 266mm width by 107mm height by 293mm depth.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 4014B

Models are versatile sweep function generators utilizing an advanced direct digital synthesis (DDS) design. These instruments generate sine, square, and triangle waveforms with high signal precision and stability. Both models provide variable output voltages from 0 to 10 Vpp into 50 ohms or up to 20 Vpp into open circuit, and a continuously variable DC offset to inject signals directly into circuits at the correct bias level.