Circuit Tracers & Analyzers - Page 8

Manufacturer: T3 Innovation Brand: T3 Innovation Model: TT005

T3 Innovation manufactures handheld testing equipment for use in the telecommunications, networking, and electrical design and maintenance industries. Established in 2009, T3 Innovation is headquartered in Camarillo, CA.

Manufacturer: Morris Products Brand: Morris Products Model: MP-57320

Can identify split pairs when one wire from a pair has been terminated. Used to send or trace a tone. Use on twisted pair wiring (telecom/datacom), single conductors, coaxial cables, de-energized AC wiring, & most other wiring. The probe identifies the signal from the tone generator through drywall, wood & other non-metallic materials. Continuity test. Adjustable sensitivity/volume control to increase accuracy.

Manufacturer: TRC Brand: TRC Model: 44260

TRC Circuit Analyzer. Installs in seconds without tools or hardware. Adapter plugs directly between the power pedestal and your line cord and provides a graphic verification of electrical power before you hook up your RV. Identifies faulty park power plus offers surge protection. Analyzes circuits to verify pedestal power. Illuminated power status indicators. Weather resistant Antenna. Checks for Open Ground, Open Neutral and Correct Polarity. 1,020 Joules surge protection. 10 ounce.

Manufacturer: BOX Partners LLC Brand: Box Partners Model: STC326

The 3M ESD 1000 translucent metal-in bag is sold 100 per pack and is another quality product from 3M. The metal-in bag is constructive of aluminum, polyester, polyethylene and protective properties such as static dissipative, static shielding. The overall length and width are 18 in x 15 in. Thickness is a key component to use of this product and measures in at 3 mil.

Manufacturer: Psiber Data Systems Brand: Psiber Data Model: CTK1015

The CableTracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The CableTracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing.

Manufacturer: SUNWIN Brand: Sunwin

1. Jw3208 optical power meter:Wavelength(nm): 800-1600nmDetector type: InGaAs Measurement Range dBm: -50~+26dBmUncertainty (dB): ±5%Calibrated Wavelength(nm): 850, 980, 1300, 1310, 1490, 1550Display resolution(dB): 0.01Optical Connector: FC(Interchangeable SC,ST)/As well as 2.5mm universalBattery Operating time (h): 240h with 1.5V Battery(3pcs)Operation Temperature(℃ ): -10℃+60℃Storage Temperature(℃): -25℃+70℃Relative Humidity: 0-95% (non-condensing) Dimension(mm): 175*82*33Power Supply: Alkaline Battery(3*AA1.5V)Weight(g): 310g2. The 20mW visual fault locator : used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement2Hz glint or continuous outputWavelength: 650nm ± 20nmOutput Power: >20mWDynamic Distance:

Manufacturer: 3M Brand: 3M

3M(TM) Metal-In Static Shielding Bag 1900 is an economical alternative shielding bag for less demanding applications where testing and reusing bags are not prime considerations.

Manufacturer: SCS Brand: SCS Model: 3002424

The SCS 1000 Series translucent metal-in bag is sold 100 per pack and is another quality product from SCS. The metal-in bag is constructive of polyester and protective properties such as static shielding. The overall length and width are 24 in x 24 in. Thickness is a key component to use of this product and measures in at 3 mil.

Manufacturer: Psiber Data Systems Brand: Psiber Data Model: CT50

The CableTool model CT50 from Psiber Data Systems provides contractors, CATV, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet. Using TDR technology, the CableTool diagnoses cable faults with no launch or dead zone and an accuracy to ±2%. Simply select the appropriate cable type from the pre-stored library or enter the cable NVP, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires up to 250v is continuously measured by the built in, true RMS voltmeter and is displayed to warn of a potentially unsafe condition.

Manufacturer: Fluke Networks Brand: FLUKE NETWORKS Model: 26500000

TS100 Cable Fault Finder work on virtually any two-or-more conductor cables. With the patented SmartTone analog tone generator that generates five different tones, identifying a specific pair is quick and easy, even in proximity to current-bearing cable. SmartTone capability identifies the exact pair by changing the tone at the far end of the cable when the correct pair is shorted. The bright large LED screen and simple menu is easy to read, even in low light conditions. When clipping on to an unidentified par at a job site, with voltage up to 250 V AC, the unit will immediately sound an alarm.Device Function: Short Circuit TestingMaximum Length Measurement: 3000 ft