Voltage Testers - Page 31

Manufacturer: Thermaltake Brand: Thermaltake Model: AC0015 Color: Black

Dr. Power II is a fully automated diagnostic tool that allows full testing of the power supply and the output voltages of all of the rails and connectors to assist with diagnosis and troubleshooting of stability or non-posting issues due to faulty or unstable power supply. Support all ATX power supplies and all applicable connectors (Main 24Pin, Aux 4/8pin, Molex, 6/8Pin PCI-E, SATA) to ensure the whole power supply is running within specification. Large OCD readout shows all voltages actively within 1/10th of a volt and allows for easy diagnosis of trouble connectors or power supply units. Alarm system will notify user of abnormal behavior by the power supply to assist with easier troubleshooting of stability problems.

Manufacturer: Reed Brand: Reed Instruments Model: ST-118 Color: Blue

The REED ST-118 is a combination digital multimeter and non-contact voltage detector that also features a built-in flashlight. Practical and economical, the compact ST-118 measures AC and DC voltage and current, and resistance as well as it detects, without contact, live-not live voltage on electrical circuits found in residential, commercial and industrial buildings. This average-sensing , or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is an auto-ranging meter that automatically selects the appropriate operating range for the property being measured. The LCD has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). Specifications Maximum alternating current (AC) input 200 milliamp Maximum direct current (DC) input 200 milliamp Maximum AC voltage input 600 volts (V) Maximum DC voltage input 600V Maximum resistance detected 20 megaohms Noncontact voltage detection range 70 to 480V AC Power supply 1.5V AAA batteries (two, installed) Standards met European Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1 Weight 145 g/5.11 oz. Dimensions 100 x 55 x 32.5 mm/3.94 x 2.17 x 1.28 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical ci...

Manufacturer: Etekcity Brand: Etekcity Model: 679113374812

Clamp meters, also called clamp-on meters, are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. This Etekcity digital clamp meter is an auto-ranging multimeter that has two jaws which can close around an electrical conductor up to 26mm in diameter to measure AC current up to 400 amp without interrupting the circuit. A set of test leads is included for measuring AC/DC voltage, resistance and for diode and continuity test. It comes with a handy carrying pouch and an easy-to-read large LCD display, and also featues Data Hold, Max Reading, Auto off functions.SpecificationsSafety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V overvoltage and double insulationDisplay: Maximum display 1999Range selection: Auto rangingOverload display: Display OLMax. Jaw Opening: 28mm diameterMax. Current Conductor Size: 26mm diameterAC current: 2/20/200/400AAC voltage: 2/20/200/600VDC voltage: 200mV; 2/20/200/600VResistance: 200Ω; 2/20/200KΩ; 2/20MΩDiode test: YesContinuity test: YesDimensions: 8.19 x 2.99 x 1.18 inchesPower: 2 AAA 1.5V batteriesBattery Life: about 150hoursWeight: 9.2 oz Package Includes 1 x Etekcity Digital Clamp Meter2 x Test Leads (a pair) 1 x Carrying Bag1 x User Manual

Manufacturer: bayite Brand: bayite

This meter can only be used with one-phase AC power. And it can only measure the active power(real power). It doesn't show Apparent power. For more information about the difference, please search AC POWER on wikipedia. Main Specifications: Working voltage: 80 ~ 260VAC Working frequency: 50/60Hz Measuring:Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Store data when power off The blue backlight can be turned on/off manually Test Range and Display format: 1.Power: test range: 0~22kW < 1kW, display: 0.0~999.9W 1kW~10kW, display: 1000~9999W > 10kW, display: 0.1~22.0kW 2.Energy: test range: 0~9999kWh 10kWh, display: 10~9999kWh 3.Voltage: test range: 80~260V(single-phase) Display: 80~260V 4.Current: test range: 0~100A Display: 0.00~99.99A Precautions 1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt. 2. Applied load should not exceed the rated power. 3. Wiring order can not be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x 80 ~ 260VAC 100A Power Multimeter w/ Open-close structure Current Transformer

Manufacturer: Extech Instruments Brand: Extech Model: MN16A

Compact, economical manual and autoranging multimeter with temperature Thermocouple type K function for surface and air . Temperature measurements up to 1400°F (760°C). Resistance tests with continuity and diode functions. Measure AC and DC voltage to 600 V. DC current function to 10 A. Data hold function locks reading in the display. Large easy-to-read digital display. Compact design with built-in tilt stand

Manufacturer: SAMYO Brand: Proster Model: VC97 Color: 4000 3 3/4

Proster 3 3/4 digital multimeter measures DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, duty cycle, transistor, diode, and continuity, etc.It also provides functions including unit symbol display, data holding, relative value measuring, auto range, auto power off and warning alarm.It uses a LCD with 32mm high figure, which makes the reading clearer and the operation more convenient.It is an ideal tool for labs, factories and radio-technology.Features:Basic Function: DCV, ACV, DCA, Resistance, Capacitance, Centigrade temperatureSpecial Function: Diode test, hFE test, Continuity test, Low battery indication, Duty cycle measuring, Data hold, Auto power off, Function protect.Max display: 4000(3 3/4) digits, automatic polarity and unit symbol displayAC frequency response: 40-400HzOperation way:auto rangeMeasurement method: double integral A/D conversionWorking environment: (0～40)°C, relative humidity:

Manufacturer: MISOL Brand: MISOL

This product not only provides power connection for the electric appliances,but also records operations of the appliances. Operation conditions on the display includes:voltage of power supply,real-time running power,electricity consumption,electricity cost,operation time. At the same time,it provides analysis on real-time runningpower and gives out alarm automatically once abnormal operation occurs. This helps to use and maintain the appliances scientifically as well as save powerand reduce waste. So it is alsocalled power-saving guardian. Functions: 1. AC voltage: 160~280V AC/50Hz; 2. Power: 0.7~3000W; 3. Watt-hour: 0.0001~999.9kWh; 4. Electricity cost: $ 0~9,999; 5. Ratio of operation condition: 0~100% ; 6. Running time: 0~60 mins to 24 hours to 999 days. (0~24h~9999d) Parameters: 1. Voltage: 160~280V AC/50Hz; 2. Peak load: 15A 3. Temperature: -10~60 Cel.degree 4. Humidity: 10~95% RH 5. Measurement accuracy: +/- 1% Socket Versions: UK plug

Manufacturer: bayite Brand: bayite

bayite Hall effect current meter reads current by detecting the magnetic field around the wire, there is no electrical contact which eliminate risk to delicate monitoring equipment and also minimizes safety concerns. The sensor doesn't get hot like the current shunt sense resistor which can have thermal temperature heat dissipation issues. Three display modes: 1, alternately display Amps and Voltage 2, only display Amps 3, only display Voltage Specifications: Measurement Range: + -100A Accuracy: + - 1% Resolution: 0.2A Working current: 7-15mA Power supply: DC 5-120V Product Dimensions: 48mm*29mm*23mm Mounting hole: 45.5mm*25.5mm Sensor hole diameter: 19mm Operating temperature: -4°F - 140°F (-20°C - 60°C) As the resolution is 0.2A, the current reading might be flickering with 0.2A difference. For example, if the current is 1.7A, you might see a 1.7A and 1.9A alternatively. This is normal. If your signal is too weak or you are not getting the resolution you want, you can coil the wire through the current sensor as many times as you want to double, triple, or quadruple the sensitivity or resolution.For example, if your current signal is only 0.03 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 0.3 Amps.

Manufacturer: Fluke Brand: Fluke Model: FLK-VT-HARD CASE

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL950

1 Pair (red, black) of test leads with multi-stacking 4mm banana plugs and mini-pincer. Mini-pincers open to 2.3mm. 90cm long PVC insulated leads. 30V rms or 60V DC, 5A. 1 Year warranty.