Voltage Testers - Page 41

Manufacturer: Amprobe Brand: Amprobe Model: LT-10 Color: Multicolored

The LT-10 Lamp Tester is a 3-in-1 solution to test fluorescent light bulbs, pins and voltage. With an industry leading 48" removable and retractable antenna, VolTect™ non-contact voltage detection and its ultra-compact design, the Amprobe LT-10 Lamp Tester is the right tool for electrical and facilities maintenance applications. Includes: 48” antenna, user’s manual, battery and carrying case.

Manufacturer: Amprobe Brand: Amprobe Model: PM55A

The Amprobe PM55A digital multimeter with built-in non-contact voltage detector is an average-sensing, auto-ranging meter for measuring voltage, resistance, capacitance, frequency, and microcurrent in electrical testing applications. The attached test leads measure alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V), resistance to 6 megaohms, capacitance to 2,000 microfarads, frequency to 30 kilohertz (kHz), and microcurrent to 2,000 microamp. The meter has a non-contact voltage detector that senses AC voltage without touching or interrupting the circuit. The meter measures 4.4 x 2.1 x 0.4 inches (H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back), and it can be carried in a shirt pocket when not in use. The microamp reading identifies current changes in flame detector applications. The meter automatically selects AC voltage, DC voltage, or resistance function based on input. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. An auto power-off mode turns off the unit after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is an auto-ranging meter and automatically selects the correct operating range for the property being measured. The meter has a 6,000-count (3-5/6 digit) liquid crystal display (LCD) that can display up to 5,999 units before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V (which covers large house...

Manufacturer: Amprobe Brand: Amprobe Model: DM73C

The Amprobe DM73C digital multimeter is an average-sensing, auto-ranging multimeter with built-in test probe for measuring voltage and resistance in electrical testing applications. The meter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V) and resistance to 34 megaohms. The meter measures 7.8 x 1.1 x 1.4 inches (H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back), and it can be carried in a pocket when not in use. It has a liquid crystal display (LCD) that shows readings both in digits and on a 34-segment bar graph. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. Amprobe began life in Long Island, NY in the late 1940's under the name Pyramid Instrument Company. In 1960 the company name was formally changed to Amprobe Instrument Corporation. Amprobe continued to design, engineer, manufacture and distribute product from its Lynbrook, NY location until it was merged to form ATP and relocated to South Florida in late 1999.

Manufacturer: yqltd Brand: CNBTR Other Electronic Components

Specification: Material: Alloy Brand Name: CNBTR Color: Grey Voltage regulation: change in engine speed within Temperature stability: voltage drift 0.05% /every Celsius Detection Input: 16 - 25VAC 50HZ Power input: 60-100VAC 50HZ Output Voltage: 100VDC (when 85V input) Output Current: 2A continuous Weight:1230g Features: For Petrol generator 168 type 2 to 3kw Full-wave rectifier Single-phase voltage detection Adjustable output voltage Resin sealing note moistureproof and shockproof Package include: 10 x Voltage regulator (The unique MPN label on each inner package, which confirms it passed the quality inspection and it is genuine item sold from our shop. Please offer it to us when you need assistance.)

Manufacturer: Fluke Brand: Fluke Model: XXXMXV1

Voltage adapter for MX4+. 100V AC voltage.

Manufacturer: RioRand Brand: RioRand Model: RROPFPVDUIEFBPNTOOP

Module parameters: Module Properties: non-isolated CC-CV step-down module Input voltage : DC 7-26V Output voltage :1.25-25V ( adjustable ) Output current :0-8A ( adjustable ) ( please attention to cooling with high Current Output ) Output power: natural cooling 40W, enhance heat dissipation up to 80W Voltmeter Resolution : 0.1V Ammeter Resolution : 0.02A Power Meter Resolution : 0.1W, max display 88.9W, over max will indicate EEE Lowest dropout : 1.25V Potentiometer adjustment direction : clockwise ( increase ) , counterclockwise ( decrease ) Protection: Charging reverse charge protection, Chip overheating protection Reverse polarity protection: None Dimensions : 110 X 62.5 X 31 ( mm) Flatbed aluminum heat sink is specially designed to facilitate the expansion of large-scale cooling equipment. Scope: Constant Current LED driver, Lithium battery Charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charge. Nickel-cadmium, nickel-metal hydride batteries (battery pack) Charging. Solar panels, wind turbine power conversion. Supply below 80W DC electronic equipment ect. Package include: 1x DC-DC Converter with LED Meter

Manufacturer: hu Brand: hayear

Type:Voltmeters Model:UT15C Display Type:Digital Display Operating Mode:Auto DC Voltage:12V/24V/50V/120V/230V/400V/690V Low Battery Indication:YES Screen Size:23*12mm Power Supply:AAA Weight:0.21 Dimensions:27.5*5.1*3 Package List:1 x UT15C DMM Digital Voltage Tester

Manufacturer: Hioki Brand: Hioki

Hioki 9243 Grabber Clip

Manufacturer: Zhuhai Jida Huapu Instrument Co.,Ltd Brand: HoldPeak Model: HP-90BS Color: blue black 90BS

The HOLDPEAK 90BS Auto / Manual Ranging Multimeter is designed for both commercial and residential applications. It is an auto/manual ranging meter for measuring AC/DC current and voltage, resistance, capacitance, frequency, temperature and duty cycles in commercial, home repair, automotive and electrical testing applications. It comes with non-contact voltage detection, a bright large backlit LCD display and auto power-off feature and also features Data Hold and Max/Min Reading, C/F exchange, Solar Charge, USB Port. Specifications Safety/Compliances: IEC61010 CAT.III 1000V, CAT.IV 600V overvoltage and double insulation standard Display: Maximum reading 6000, analogue bar graph 41 segments Range selection: Auto or Manual Overload display: Display OL DC voltage: 600mV (¡À1.2%), 6/60/600V (¡À0.8%), 1000V (¡À1.5%) AC voltage: 600mV (¡À2.5%), 6/60/600V/750V (¡À1.0%) DC current: 600uA/6000uA/60mA/600mA (¡À1.0%), 6/10A (¡À1.5%) AC current: 600uA/6000uA/60mA/600mA (¡À1.5%), 6/10A (¡À2.0%) Capacitance: 9.999nF (¡À3.0%), 99.99nF/999.9nF/9.999uF (¡À2.5%), 99.99uF/999.9uF (¡À3.0%), 9.999mF/99.99mF (¡À3.5%) Resistance: 600ohm/6k/60k/600kohm (¡À1.2%), 6Mohm (¡À1.5%), 60Mohm (¡À2.5%) Frequency range: 9.999Hz ¨C 9.999MHz (¡À0.5%) hFE: Yes Diode test: Yes Continuity test: Yes Non-contact voltage detection: Yes C/F Temperature Unit Select: Yes True RMS: Yes Relative Value: Yes MAX/MIN Value Test: Yes Solar Charge: Yes USB Port: Yes Dimensions: 6.6¡± x 3.48 x 2.36 Power: 9V 6F22 battery Weight: 0.71 lb Package Includes 1 x HOLDPEAK 90BS Digital Multimeter 1 x Test Leads 1 x special recharge wire 1 x Charger 1 x Carrying Case 1 x Operating Manual 1 x 9V 6F22 battery

Manufacturer: Fluke Corporation Brand: Fluke Model: 2539565

Fluke EP0328Z USB to serial RS232 adapter. Used for 1740 Series 3 phase power quality loggers disturbance analyzer.