Voltage Testers - Page 6

Manufacturer: HYM Brand: HYM Model: SX440

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Technical Datas Model:SX440 Voltage build: When remanence automatically build pressure greater than 4V25Hz Input Power: AC 190 ~ 260V 50/60Hz Output voltage: 90V DC maximum (when the input AC 207V pm) Current: 4A (continuous) 6A10S (instantaneous) Frequency Compensation: When the built-in engine revolutions decrease the output frequency protection circuit voltage drop along Adjusted rate: better than 1%. NOTE: Please give us your phone number and postcode which is to ensure a smooth and safe delivery. And we can also send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Etcon Corp

Etcon VT154 Audible Voltage Continuity Tester - Solenoid Type

Manufacturer: MURATA POWER SOLUTIONS Brand: Murata Power Solutions Model: DMS-20PC-0-DCM-C-MURATA POWER SOLUTIONS

MURATA POWER SOLUTIONS DMS-20PC-0-DCM-C VOLTAGE METER

Manufacturer: Builders World Wholesale Distribution Brand: Milwaukee Model: 2213-20

Auto Voltage/Continuity Tester W/ Resistance. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.

Manufacturer: Tenma Brand: Tenma Model: 72-3040

The Tenma multiplier probe adapts most 10Mohm multimeters into a high voltage meter. Meets IEC1010 safety requirements.Maximum working voltage: 40KVDC, peak AC, 28KVAC RMS (60Hz) Division ratio: 1000:1 Input resistance: 1000MΩ DC Accuracy: ±1% (1KV~20KV) ±2% (20KV~40KV) AC Accuracy: ±5% (1KV~28KV RMS, 50/60Hz)

Manufacturer: TH Brand: TH

Input Voltage: 100-265V Output Voltage: 0-305V - Suitable for single LED beads, LED stirng, LED panel and Integrated optical LED - Support testing the capacitance voltage and the diode voltage - No need to disassemble panel to test the LED strips.With function of showing working voltage, you can know the LED panel problem easily. If there is something wrong with LED strip, you can change it or replace the defective LED beads. - Safe Protection: Double Isolated - Burn protection: Voltage and Current Intelligent Adjustment - Safety design : Slow boost , soft start. Increase the current steadily. How to operate this Backlight Lamp Tester? 1. Plug in power, it would cost about 3 to 5 seconds to start 2. The soft start mode make the backlight getting brighter gradually 3. If you can't make sure which is"+"and "-", then not test for a long time 4. Don't touch the output terminal of probes for a long time 5. Retardancy materials: Double Isolate Design makes LED tester safety with high strength and flame retardancy materials.

Manufacturer: Astro Flight Brand: AstroFlight

This is Astro Flight's answer to a Compact and Lightweight Digital Multimeter.FEATURES: Uses a digital display meter for Amps, Volts, Watts, and Milliamps.INCLUDES: One Digital Multi-meter w/Astro Flight Zero-Loss Connector (ASTM4005) and Futaba J type female connector (FUTM3720)SPECS: Amp meter: .1 to 70A Volt meter: 2.5 to 60V Watt meter: 1 to 5000W mAh (milliamp hour): 1 to 9000mAh Length: 3-15/16" Height: 7/8" Width: 2-1/8"Astro FlightPart AST101D

Manufacturer: Fluke Corporation Brand: Fluke Model: 4358028

The Fluke 4358028 hanger kit for the Fluke 1730 three-phase energy logger enables the operator to hang the meter, power supply, or both from any magnetic surface for hands-free use (meter sold separately). The hanger has two magnets to hang the meter with the power supply attached, the meter itself, or the power supply itself. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.What's in the Box?Velcro strapTwo magnetsHanger

Manufacturer: AEMC Brand: AEMC Model: MN251

The Model MN251 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN251 meets EN 61010, 600V, Cat III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN251 has a 0.78" jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The Model MN251 uses tape wound cores to further improve its high and low end performance. Rated at 200A RMS it has a measurement range to 240A RMS. Measurement range of 0.5 to 240AAC. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 10mVAC/AAC output signal. Transformation Ratio: Voltage output. Overload: 240A for 10 min ON, 30 min OFF. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 200A RMS with an error (due to CF) of 4 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet Lead. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.