Electrical Testing - Page 100

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 2003A

The Kyoritsu 2003A digital clamp-meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 2,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 55mm (2.16 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, DC voltage to 600V, and resistance to 4,000Ω (ohms). The meter has a rotary switch to select the property to measure, and a 4,000-count LCD. The maximum function displays the highest reading measured during a 400ms (millisecond) sample. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. For long-term monitoring of current, the meter comes with an output plug for attaching to a recording device (sold separately). The unit operates on two 1.5V AA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This average-sensing, also called average responding or mean value, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT (category) IV installations to 600 volts, which covers equipment at the origin of the installation, such as electricity meters and primary ove...

Manufacturer: MASTECH Brand: Mastech Model: MS6818 Color: Green

Display voltage ranged from 12-600V DC or AC, accuracy +-2.5%; Sensitivity of receiver adjustable; Key tone and beep On/Off switch; Torch light built in transmitter; One receiver can connect two transmitters with different codes Used for construction and maintenance of communication cable, elevtric power cable, architecture, heating project etc; Safety as per IEC1010-1 Cat III 600V Depth of Track: depend on meterial Single pole application: about 0-200cm Dual-pole application: 0-50cm Single loop line: up to 250cm  Telephone Check: Identify the state for the working telephone line: Busy, Ringing or Clear Tone Check Judge continuity of the cables or wires.  NetCable Check Test for open circuits, Shorts, miswires, reversals, split pairs and LCD display the test results. SHIELD detection tests a cable's shield integrity. Main unit and one remote allow one person testing of T568A, T568B, 10Base-T. Easy to read fault display and high speed testing. Debug mode for detailed fault identification result. Accessories: 1) Crocodile clamps: 2pcs 2) Test leads: 2pcs 3) test probe 4) Grounding rod; 5) Portable bag; 6) English manual; Click here to download the manual: http://www.aidetek.com/New_products_info/Datasheet/huayi/MS6818_enlglish_manual.pdf

Manufacturer: Hioki Brand: Hioki Model: 3281

The Hioki 3281 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 600A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 600V, frequency to 1,000Hz (hertz), and resistance to 10kΩ (kilohms). The meter has a rotary switch to select the property to measure, and a 3,000-count LCD that shows the reading numerically and in a 35-segment bar graph. The crest factor function uses a 1.00 to 5.00 scale to measure the quality of an AC signal and its ability to generate a particular voltage or current. The record function displays the maximum, minimum, and average readings for a property after the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on a single 9V 6F22 battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets EN (European Standard) safety standard 61010, and is rated for CAT (category) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed...

Manufacturer: GW Instek Brand: GW Instek Model: GKT-003

Kit includes Termination, N-Type cap with chain, RF cable assembly and Soft carrying case. RLB kit for GSP series spectrum analyzer.

Manufacturer: Duoyi Brand: Yi Duo Model: X1IN10085

Features:4 pole earth resistance measurement up 0 to 20.99k¦¸ with min. resolution 0.01¦¸Auto ranging soil resistivity measurement 0 to 395.6k¦¸mTest current maximum 80mAAdvance filtering method based on FFT(fast fourier transform) reduces noise interferenceCompensation for residual resistance RkData Memory 1000 setsConforms to CATIV 150V, CATIII 300VPackage includes:1 * DY4300 Earth Ground Resistance Tester1 * Carry Case

Manufacturer: Duoyi Brand: Yi Duo Model: X1IN10085

Features:4 pole earth resistance measurement up 0 to 20.99k¦¸ with min. resolution 0.01¦¸Auto ranging soil resistivity measurement 0 to 395.6k¦¸mTest current maximum 80mAAdvance filtering method based on FFT(fast fourier transform) reduces noise interferenceCompensation for residual resistance RkData Memory 1000 setsConforms to CATIV 150V, CATIII 300VPackage includes:1 * DY4300 Earth Ground Resistance Tester1 * Carry Case

Manufacturer: Rigol Brand: Rigol Model: RP1300H

Rigol RP1300H Oscilloscope DC-300MHz Passive High Voltage Probe Accessory Features RP1300H is provided with several accessories designed to make probing and measurement simpler. Please take a moment to familiarize yourself with these accessories and their users.   RP1300H is provided with some accessories designed to make probing and measurement simpler. For digital oscilloscopes, the signal under test needs to be connected to the measurement channel via various oscilloscope probes or 50 ohm cables.The Probing is very important to making quality measurements. If the probe performance is not adequate or if you did not select the proper probe for your application, you will see distorted or misleading signals on your oscilloscope. There are two kinds of probes, one is passive probe, another one is active probe. active probe requires power while passive probe does not. For general-purpose measurements(600 MHz), active probes are the way to go. They cost more than passive probe and their input voltage is limited, but because of their significantly lower capacitive loading, they give you more accurate insight into fast signals.

Manufacturer: Megger Brand: Megger Model: 250574

The Megger 250574 three-piece test lead set includes three test leads and is for use with the Megger 250260 ground resistance tester. One test lead is 12' (3.6 m) long, one is 31' (9.4 m) long, and one is 50' (15 m) long. The test leads are color-coded to help ensure proper connection.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: UNI-T Brand: UNI-T

1?Dual analog channels width range 1mV/div~20V/div; 2?7 inches widescreen LCD displays; 3?Special Print Scree Feature; 4?Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; 5?USB drive system software upgrade; 6?Storage of waveforms setups and interfaces waveforms and setups reproduction; 7?Automatic measurement of 28 waveform parameters; 8?Unique waveform recording and replay function; 9?Multilingual menu displays.

Manufacturer: EasySync Brand: EasySync

Logic Analyzers 16 CHANNEL LOGIC Analzer W/ Probes