|
|
-
4.9 of 5.0 with 13 Reviews
SALE PRICE: $254.05 1% OFF
Manufacturer: StandardPlumbing: Kohler
Brand: UEI Test Equipment
Model: CA30MA
Manufacturer: StandardPlumbing: Kohler
Brand: UEI Test Equipment
Model: CA30MA
Founded in Vancouver, BC in 1946, UEi Canada Inc. is a leading distributor of portable testing and measuring equipment for the HVAC and Electrical industry. In 1987, UEi Canada joined the Kane Group of companies with sister companies in England and United States.
-
4.9 of 5.0 with 38 Reviews
SALE PRICE: $255.00
Manufacturer: Cal Test Electronics
Brand: Cal Test Electronics
Model: CT2982B
Manufacturer: Cal Test Electronics
Brand: Cal Test Electronics
Model: CT2982B
The Elditest CT2982B is an 10 kV high voltage divider probe for use with both digital and analog oscilloscopes.
-
4.9 of 5.0 with 6 Reviews
SALE PRICE: $259.00
Manufacturer: Pico
Brand: Pico
Model: TA167-PICO TECHNOLOGY
Manufacturer: Pico
Brand: Pico
Model: TA167-PICO TECHNOLOGY
|
Pico TA167 BNC 2000A/200A Current Clamp. 200 A / 2000 A AC/DC current probe, BNC connector The TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000 A. Instructions Switch On When the probe is switched on to the required measuring range, the green LED will illuminate. The LED starts flashing when the battery voltage is too low for normal operation and warns the user that it requires changing. This procedure is described below. Auto Power OFF In order to save battery life, the probe will automatically switch itself off after approximately 10 minutes. To disable the Auto power off function, Switch Off the probe and Switch On whilst pressing the auto zero button. The red LED will illuminate and the probe will stay ON until switched off again. Auto Zero The output zero offset voltage of the probe may change due to thermal shifts and other environmental conditions. Select the required measuring range and to null the output voltage depress the Auto Zero button. Ensure that the probe is away from the current carrying conductor whilst the probe is being nulled. Current Measurement 1. Switch on the probe by selecting the required measuring range and check that the green LED is lit. 2. Connect the output lead to the oscilloscope, 3. Zero the probe using the Auto Zero button. 4. Clamp the jaws of the probe round the conductor ensuring a good contact between the closing faces of the jaws. 5. Observe and take measurements as required. Positive output indicates that the current flow is in the direction shown by the arrow on the probe. Battery Replacement The green or red LED will flash when the minimum operating voltage is approached. Use the following procedure: SAFETY WARNING Before removing the battery cover, ensure that the probe is disconnected from the oscilloscope and remote from any live electrical circuit
-
4.9 of 5.0 with 7 Reviews
SALE PRICE: $263.00
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: PP006A
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: PP006A
|
Recommended for LT Series and WaveJet(A) Series (> 350 MHz) Oscilloscopes. Passive probe are the standard probe provided with most oscilloscopes. Typical passive probe provide a 10:1 attenuation and feature a high input resistance of 10 megohms. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probe are designed to handle voltages of at least 400V, some as high as 600V. LeCroy passive probe feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. Bandwidth (probe only): 500 MHz. Input resistance: 10 megohms. Input capacitance: 12 pF. Maximum input voltage: 600 V. Attenuation: 10:01. Coupling: AC 1 megohms, DC 1 megohms, GND. Operating temperature: 0 to 50 degree C (32 to 122 degree F). Humidity: 80 percent (non-condensing). Probe diameter: 5mm. Interface: BNC. Attenuation sense pin. Recommended oscilloscope: LT series and WaveJet 300(A) less than or equals to 350 MHz.
-
4.9 of 5.0 with 21 Reviews
SALE PRICE: $263.00 1% OFF
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: PP011-1
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: PP011-1
Recommended for WaveRunner 6000(A) Series, WaveRunner Xi(A) (1 GHz - 2 GHz) Series, WaveSurfer Xs(A,B) Series (1 GHz), WavePro 7 Zi(A) Series, and WaveMaster 8 Zi(A) Series Oscilloscopes. Bandwidth: 500 MHz. Input resistance: 10 megohm. Input capacitance: 9.5 pF. Maximum Input Voltage: 400 V. Attenuation: 10:1. Coupling: 1 megohm AC, 1 megohm DC, ground. Operating temperature: 0 to 50 degree C. Humidity: 80 percent maximum up to 31 degree C, 45 percent maximum at 50 degree C. Storage temperature: -40 to 71 degree C: Maximum altitude: 2000 meter. Probe diameter: 5mm. Cable length: 1-3/16 meter. Interface: BNC. Attenuation sense pin: Yes.
-
4.9 of 5.0 with 14 Reviews
SALE PRICE: $264.00
Manufacturer: Dranetz
Brand: Dranetz
Model: EMMOD201
Manufacturer: Dranetz
Brand: Dranetz
Model: EMMOD201
The EMMOD201 extensionmodule issimplysnapped onto the back of the A210,A220,A230 or A230s power instrument and issupplied with power bythe same. Parameterising is completely performed via the A200plus PC software.
-
4.9 of 5.0 with 33 Reviews
SALE PRICE: $265.00 30% OFF
Manufacturer: Pomona Electronics
Brand: Pomona
Model: 5748
Manufacturer: Pomona Electronics
Brand: Pomona
Model: 5748
The 5748 maxi universal adapter Kit contains 2 PCS each (41 PCS total): BNC male, BNC female, TNC male, TNC female, SMA male, SMA female, n-type male, n-type female, UHF male, UHF female, mini UHF male, mini UHF female, F Type male, F Type female, RCA male, RCA female, six intermediate couplers, one double banana plug, on double banana jack and one Sampler.
-
4.9 of 5.0 with 41 Reviews
SALE PRICE: $267.81 1% OFF
Manufacturer: Fluke Electronics
Brand: Fluke
Model: 3086286
Manufacturer: Fluke Electronics
Brand: Fluke
Model: 3086286
Price for: Each 1 . Bandwidth:200MHz.Connector Type A:Alligator Clip.Input Voltage Max:1kV.Lead Length:2.5m.SVHC:No SVHC (16-Dec-2013).Test Connector Type A:BNC Plug.Test Connector Type B:Hook Clip.Test Probe Ratio:10:1
-
4.9 of 5.0 with 36 Reviews
SALE PRICE: $269.00
Manufacturer: Seeedstudio
Brand: RF Explorer
Manufacturer: Seeedstudio
Brand: RF Explorer
|
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated frequency synthesizer and double balanced mixer which offers high performance, compact size, low consumption and low cost. This model includes a WSUB1G baseline unit plus an RFEMWSUB3G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and two antennas. Feature High capacity Lipo for 16hs+ of continuous run, rechargeable by USB Windows PC client Open Source Can be extended with internal Expansion Modules for additional band and functionality Wide band coverage to all popular RF frequencies, starting at 15MHz and going up to 2.7GHz. This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and WiMax, Bluetooth, etc. Firmware: RF Explorer 3G Combo is delivered with upgraded firmware v1.09. Note some of the features and operation accuracy will be improved in upcoming lifetime free firmware revisions. Specification Frequency band: 15-2700 MHz Frequency span: 112KHz - 600MHz Graphics LCD 128x64 pixels, great visibility outdoors PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits Backlight for great indoor visibility 2 standard SMA 50 ohms connector, one for Sub-GHz wideband Nagoya NA-773 telescopic antenna included and another 2.4Ghzone for 15-2700 MHz band with helical antenna included.Amplitude resolution: 0.5dBm Left SMA port (WSUB1G): -115dBm to 0dBm Right SMA port (WSUB3G): -110dBm to -10dBm Left SMA port (WSUB1G): +5dBm Right SMA port (WSUB3G): +30dBm Average noise level (typical): -110dBm Frequency stability and accuracy (typical): +-10ppm Amplitude stability and accuracy (typical): +-6dBm Frequency resolution: 1Khz Resolution bandwidth (RBW): automatic 3Khz to 600Khz
-
4.9 of 5.0 with 49 Reviews
SALE PRICE: $271.52 51% OFF
Manufacturer: Instek
Brand: GW Instek
Model: DS3-SBD
Manufacturer: Instek
Brand: GW Instek
Model: DS3-SBD
Serial bus analysis software. Serial bus analysis software use for I2C, SPI and UART. Use for 4 channel model only.
|
|