Electrical Testing - Page 103

Manufacturer: Virtins Technology Brand: Virtins Technology

1. Package Contents: (1) VT DSO-2A10 unit with a hardware activated Multi-Instrument Standard software license. (2) 2 × 60MHz Oscilloscope Probe P6060 with two switchable positions: × 1, × 10. (3) 1m Signal Generator Test Lead. (4) 1.5m USB cable. (5) CD (contains the copy-protected Multi-Instrument software). 2. Applications: (1) Ordinary oscilloscope, spectrum analyzer and signal generator functions, all of which work simultaneously. (2) DUT (Device Under Test) analysis such as frequency response. (3) High resolution and low noises at lower sampling rates, 12 voltage ranges from full scale +/-10mV to +/-50V, and support of sensor calibration make it suitable to work as a data acquisition device. (4) Signal Recording and Replaying.....

Manufacturer: Hioki Brand: Hioki

DC to 100kHz, 1m (3.28ft) length.

Manufacturer: Fluke Corporation Brand: Fluke Model: ES-162P3

The Fluke ES-162P3 three-pole stake kit is used with Fluke 1623 and Fluke 1625 ground earth testers to perform 3-pole fall-of-potential testing. The fall-of-potential method measures the ability of the earth ground system or individual electrode to dissipate energy from the site. This five-piece kit includes three stakes, one 50m/164ft. cable reel of wire, and one 25m/82ft. cable reel of wire. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What’s in the Box? (3) Stakes Cable reel of wire, 50m/164ft. Cable reel of wire, 25m/82ft.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV301

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Yamaichi Electronics Brand: Yamaichi Electronics

Contact Probes 1MM P CROWN 4.58MM L .61MM TRVL 27G FORCE

Manufacturer: Hantek Brand: Hantek4032L

Up to 34 data input channels. High speed operation ,500MHz Timing-Mode (Internal Clock),200MHz State-Mode (External Clock) Continuously variable pre/post trigger position,Advanced Multi-Level Triggering +6V to -6V Adjustable Logic Threshold CAN, I2C, SPI and RS232 Interpreters Built-in 250MHz Frequency Counter USB 1.1 and 2.0 Compatible Channel:34 Input Impedance:200K (C=10p) Input Voltage Range:-60V~60V Voltage Threshold Range: -6V~6V Max. Sample Rate:500 MHz Max. Input Signal Bandwidth :150 MHz Min Time Resolution:2ns Sample Depth:2KSample Memory Depth:68Kbits Compatible Input :TTL,LVTTL,CMOS,LVCOMS,ECL,PECL,EIA Electrostatic Protected Area:15KV Interface:USB Port Voltage Range:4.5V~5.5V Power:Max. 3.5W Temperature Range:Operation: -10°C~60°C; Storage: -40°C~60°C Operating System:WinXP/2000/Win7 Size&Weight:150(D) x 25(H) x 165(W) mm, about 390g

Manufacturer: Megger Brand: Megger

Megger PVK330 Photovoltaic Kit with D.C Clamp Multimeter Photovoltaic Kit with D.C Clamp Multimeter When installing, commissioning and testing a photovoltaic installation additional instrumentation is required to accompany the usual electrician's test equipment such as the Megger MFT1730 and MFT1835 multifunction testers. The Megger PVK330 photovoltaic kit offers this additional instrumentation in the form of a PVM210 irradiance meter, DCM340 600 A ac / dc clampmeter and a kit of specialist solar testleads. To provide easy storage of the PV kit a zipped pouch is also included. The PVK330 kit offers the solar / photovoltaic engineer a clampmeter option of verifying, with the PVM210 irradiance meter, the stated short circuit current as provided by the manufacturer of the solar panel as required by published standards. In addition, this clampmeter offers the option of testing the current within each 'string' on a larger solar array without disconnection of cables. PVM210 Irradiance Meter The PVM210 is a pocket size instrument that has both solar detector and meter combined in one unit that permits single handed use, ideal for working at height and on sloping roofs. The unit has a 3¾ digit display and a maximum range of 1999 W/m². A hold function allows easy measurements of solar power. DCM340 Clamp Meter The DCM340 Clamp Meter features 600 V ac / dc and 600 A ac / dc ranges. Additional functions include resistance and frequency. A hold feature to enable easy measurements is also included. The additional functions would also prove to be of use in other sections of the photovoltaic installation. Silicon test leads with probes and a protective storage pouch are provided with each clamp. Specialist PV Test Leads In addition to the silicon multimeter test leads supplied with the DCM340 two pairs of specialist solar test leads are included in the PVK330. The first pair of leads comprise of 1

Manufacturer: Smiths Connectors / IDI Brand: Smiths Connectors / IDI

Contact Probes HEADED 90 DEG CONVEX

Manufacturer: Teledyne LeCroy Brand: Teledyne LeCroy

Test Probes PASSIVE PROBE FOR HDO 4000

Manufacturer: Amprobe Brand: Amprobe

Technical Specification Item Clamp Meter Digital/Analog Digital Clamp Meter Jaw Style Clamp On Max. AC Amps 600 Max. AC Volts 600 Max. DC Volts 600 Max. Ohms 60, 000 Jaw Capacity 1-3/16 Temp. Range -40 Degrees to 752 Degrees F Counts 6000 Battery Type AAA Safety Rating CAT III 600V Calibration Certificate No AC Response TRMS Audible Continuity Yes Diode Test Yes Capacitance 2500uF Frequency Counter 5 to 999.9 Hz Peak Hold No Bar Graph No Display LCD Includes Infrared Thermometer Max. Conductor Size 1.18 (30.0mm) Auto Ranging Yes Non-Contact Voltage Detector Yes Data Hold Yes Inrush Yes Auto Power Off Yes Thermometer Type Type K Thermocouple AC Current Accuracy +/-2.0% + 5 Digits Operating Temp. 32 Degrees to 104 Degrees F Standards cULus, CE Special Features Amp Tip Function, Low Pass Filter, TRMS, Motor Rotation Indication, DC Micro Amps Manufacturers Warranty Length 1 yr. This listing is for each.