|
|
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $540.00
Manufacturer: Schneider Electric
Brand: Schneider
Model: METSEPM5110
Manufacturer: Schneider Electric
Brand: Schneider
Model: METSEPM5110
PM5110 powermeter w modbus - upto 15th H - 1DO 33alarms - flush mount
-
4.9 of 5.0 with 5 Reviews
SALE PRICE: $542.10 1% OFF
Manufacturer: IDI
Brand: D.I.D.
Manufacturer: IDI
Brand: D.I.D.
Contact Probes SO PROBE FORCE GOLD CONTACT
-
4.9 of 5.0 with 36 Reviews
SALE PRICE: $549.00 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2125.74
Manufacturer: AEMC
Brand: AEMC
Model: 2125.74
The MTX Mobile Multimeter Model MTX 3281B-COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 50kHz bandwidth. The unique design features a multi-position screen and push button function selection and is ideally suited for both bench top and hand-held use.
-
4.9 of 5.0 with 42 Reviews
SALE PRICE: $550.00 7% OFF
Manufacturer: Instek
Brand: GW Instek
Model: DS3-PWR
Manufacturer: Instek
Brand: GW Instek
Model: DS3-PWR
Power analysis software. Power quality/harmonic/ripple/in-rush current measurement.
-
4.9 of 5.0 with 19 Reviews
SALE PRICE: $554.00 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: 380462-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: 380462-NIST
Portable Milliohm meter (220V) that provides resolution to 100Ohm. This Product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
4.9 of 5.0 with 32 Reviews
SALE PRICE: $556.52 1% OFF
Manufacturer: B&K PRECISION
Brand: B&K Precision
Manufacturer: B&K PRECISION
Brand: B&K Precision
B&K PRECISION 4017A SIGNAL GENERATOR, FREQUENCY/PULSE, 10MHZ
-
4.9 of 5.0 with 39 Reviews
SALE PRICE: $560.00 1% OFF
Manufacturer: TTi
Brand: TTI
Manufacturer: TTi
Brand: TTI
|
TTi TF960 6GHz Universal Counter USB The TF960 is a high performance bench-top instrument that is suitable for portable applications because of its built-in rechargeable batteries. It has a range of DC to 6GHz and can measure frequency, period, pulse width, frequency ratio, duty cycle, and events. It incorporates a large 10 digit LCD display and has a USB interface for remote control and readback. High measurement accuracy The TF930 and TF960 use a high quality temperature compensated internal frequency reference (TCXO) which has a low aging rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery powered conditions. An External Reference input is provided and changeover from the internal timebase is automatic when an external reference standard is connected. High resolution For frequency, period and frequency ratio functions the instrument uses a reciprocal counting technique to provide high resolution at all frequencies. Eight significant digits of answer are produced in a 1 second measurement time, nine digits in 10s and ten digits in 100s with a granularity of less than 2 counts in the least significant digit. Flexible signal conditioning Input A has configurable coupling (AC or DC), input impedance (1MW or 50W), attenuation (1:1 or 5:1), threshold (fully variable) and active edge, and can be used for frequencies in the range 0.001Hz to >125MHz. Input B is a nominal 50W input for frequencies in the range 80MHz to > 3GHz. Input C (TF960 only) uses a standard N connector and has a nominal 50W input for frequencies in the range 1.8GHz to > 6GHz. Multiple measurement functions The TF930 and TF960 can measure frequency, period, pulse width, duty cycle and frequency ratio, as well as event counting (totalise)
-
4.9 of 5.0 with 10 Reviews
SALE PRICE: $565.00 4% OFF
Manufacturer: Megger
Brand: Megger
Model: 250579
Manufacturer: Megger
Brand: Megger
Model: 250579
The Megger 250579 standard ground resistance testing kit is a kit for conducting ground resistance tests with a Megger DET3 or DET4 series ground resistance tester (sold separately). The kit includes three color-coded test leads 8, 15, and 30m (25’, 50’, and 100’) long, two 51cm (20â€) ground rods, and a canvas carry case for the leads and rods. The 250579 is an accessory used to perform ground resistance tests with a Megger DET3 or DET4 series ground resistance tester.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
4.9 of 5.0 with 32 Reviews
SALE PRICE: $581.00 1% OFF
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: N6733B
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: N6733B
The Keysight N6733B is a 50 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control. This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W. Programming accuracy (at 23°C ±5°C): -Voltage: 0.1% + 20 mV -Current: 0.15% + 20 mA Ripple & noise (20 Hz to 20 MHz): -Voltage rms: 3 mV -Voltage peak-to-peak: 14 mV -Current rms: 2 mA
-
4.9 of 5.0 with 5 Reviews
SALE PRICE: $585.00 1% OFF
Manufacturer: Smiths Connectors / IDI
Brand: Smiths Connectors / IDI
Manufacturer: Smiths Connectors / IDI
Brand: Smiths Connectors / IDI
Contact Probes HEADLESS SERRATED
|
|