Electrical Testing - Page 110

Manufacturer: Megger Brand: Megger Model: 6310-755

The Megger 6310-755 standard accessory kit set of accessories used in ground resistance testing. It is used with a Megger DET3T or DET4T digital ground resistance tester (sold separately). The kit includes 1.13kg (2.5 lb.) hammer, four 12mm (1.5”) galvanized steel spikes, two spike extractors, and four test leads in a soft carrying case. The 6310-755 is an accessory used perform ground resistance with a Megger DET3T or DET4T digital ground resistance tester.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Global Specialties Brand: Global Specialties Model: 9004

The Model 9004 is great for service or Test bench and also for school labs. The touch of a button can select the 5 digit counter to accurately measure the function generator frequency, the RF generator frequency or an external i/p signal. The 9004 combines some most needed Test Equipment in a very special way. It effectively gives you a 1 Hz to 110 MHz generator and a 60W power supply to power your test circuits. The professional will find it covers a broad spectrum of his test needs and the schools will see plenty of experiments with it. A very wide variety of experiments in Analog, Digital and RF can be performed with just this unit. The unit is great for service or Test bench and also simple enough for a school lab. All functions are kept completely independent for full functionality and there is no clutter of switches and knobs. The RF generator covers a frequency range all the way up to the commercial FM band. It also has fixed internal AM and FM modulation and also the facility of external modulation. The function generator features unipolar square/pulse outputs to directly interface to digital circuits, in addition to the standard Sine, Triangle, and Square. There are 2 Outputs-50 Ohm and 600 Ohm to match audio impedances. 100 KHz to 110 MHz RF Generator. 1 Hz to 1 MHz function generator. Variable 32 V, 2A DC power supply with adjustable voltage and current limit. Digital readout for voltage and current. AM Signal: 100 KHz to 110MHz in 7 ranges and continuously variable over the whole range with a coarse and fine control. Modulation frequency: selectable 400 Hz/ 1 KHz. Modulation depth: a) internal modulation 30 percent. b) external modulation: freq. range 50Hz to 4kHz Bandwidth +/-3dB. Output amplitude: 200mV p-p at 75 ohms. Attenuation: 2 x 20 dB step and continuously variable 20 dB (approximate). FM signal: 30 MHz to 110 MHz. Modulation frequency: selectable 400Hz/1kHz.

Manufacturer: Fluke Brand: Fluke Model: 771

EXCLUSIVELY FROM TRANSCAT - Product Description Features: Clamp On Multimeter From the Manufacturer Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The Fluke 771 Milliamp Process Clamp Meter's detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures. This meter measures mA signals with .01 mA resolution, and count on best in class accuracy of 0.2%. The Fluke 771 meter is sold one item per package, and covered by a three year warranty for electronics, and a one year warranty for the clamp.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-1623

The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1623 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Hantek Brand: Hantek DSO1200

Model:DSO1200 Bandwidth:200MHz Channel:2 Real-Sample Rate:500MSa/s Equivalent Sample Rate:50GSa/s Record Length:32K Rish time:≤1.7ns Timebase Accuracy:±50ppm Time Base Range:5ns/div-1000s/div Video Help -- SD Card -- Input Impandance:1MΩ ΙΙ 15pF VOLTS/DIV Range:10mV/div～5V/div A/D Converter:8bit Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div)，±400mV(20mV/div～2mV/div) DC Gain Accuracy:±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div Bandwidth Limit:20MHz Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative Trigger Source:CH1, CH2, Math +,-,x,÷,FFT, Invert Cursor Measurement:Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF DMM Max. Resolution:6,000 Counts Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity Max. Input Voltage:AC: 600V, DC: 800V Max. Input Current:AC:10A , DC: 10A Max. Input Impandance:10MΩ Display:5.7"LED Display, 320*240 dots Size:245mm x 163mm x 52mm Weight:1.3KG(Without Package) Standard Probe:PP200x2

Manufacturer: Megger Brand: Megger

The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.Be sure to Login to transcat.com for preferred member pricing.

Manufacturer: Amprobe Brand: Amprobe Model: AMB-50

The Amprobe AMB-50 industrial high-voltage insulation resistance tester is a digital meter that measures insulation resistance and voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, generators, and electrical motors. The tester has automatic range selection for increased safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC) and insulation resistance from 0 to 1 teraohms using 500, 1,000, 2,500, or 5,000V DC test voltage. A low-resistance range (0 to 4,000 ohms) is used to measure resistance in motor windings. The internal memory holds up to 18 test results for later download to a PC using the included USB cord. The tester is safety rated to European Standard (EN) 61010-1, Category III, 600V. The unit has a programmable timer to perform Dielectric Absorption Ratio Tests, Polarization Index (PI) tests, and comparison tests. The tester is powered by eight C batteries (included). The AMB-50 is designed for use by electricians and electrical contractors. Specifications Power supply (8) C batteries (included) Insulation resistance range 0 to 1 teraohm Test voltages 500, 1,000, 2,500, or 5,000V DC AC and DC voltage range 30 to 600V Weight (including batteries) 4.4 lbs./2kg Dimensions 202 x 155 x 94mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information e...

Manufacturer: Tektronix Brand: Tektronix Model: AFG1022

With 25 MHz or 60MHz bandwidth, 2 output channels, 1 mvpp to 10 vpp output Amplitude across full bandwidth, Tektronix Afg1000 arbitrary/function Generator generates all kinds of waveforms needed in a Lab. Most importantly, it offers the best value for money in the Tektronix line-up of arbitrary function Generators.

Manufacturer: Rigol Brand: Rigol

Technical Specifications: Bandwidth 100 MHz Channels 4 Real time sample rate 1 GSa/s (single-channel), 500 MSa/s (dual-channel), 250 MSa/s (full-channel) Memory depth 12 Mpts, 24 Mpts (opt.) Waveform acquisition rate 30,000 wfms/s (Max. ) Vertical sensitivity range 1 mV/div - 10 V/div Offset range 1 mV/div to 499 mV/div: ± 2 V 500 mV/div to 10 V/div: ± 100 V Vertical resolution 8 bit Math Add, Subtract, Multiply, Divide, FFT, editable Output voltage ~ 3 V, peak-peak Frequency 1 kHz General Specifications: Power 50 W (max.) Power voltage 100-240 V, 45-440 Hz Temperature range Operation: 0°C to +50°C Non-operation: -20°C to +70°C Cooling method Fan Display 7" color LCD (800×480) Weight 3.8 kg (± 0.5 kg) Dimensions 313.1 × 160.8 × 122.4 mm Package Contents: RIGOL DS1104Z digital oscilloscope (1 pc.) Passive probes (4 pcs.) Power cable (1 pc.) USB data cable (1 pc.) Quick guide (1 pc.) CD (Software and User's guide) (1 pc.)

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Eclipse Plus Ph-Hex,2.1x100mm,1.8u,600b - BC