Electrical Testing - Page 115

Manufacturer: KKmoon Brand: KKmoon

Features: Suitable for 100A current range, 75mV voltage drop. Used to extend the measuring current range of the meter. Good performance and easy for installation. Specifications: Color: Black + Silver Material: Metal + Plastic Current: 100A Voltage Drop: 75mV Accuracy Class: 0.5 Class Environmental Conditions: -40°C to +60°C Dimension: 103 * 22 * 30mm Weight: 126g / 4.46oz Package List: 1 * 100A/75mV Shunt

Manufacturer: uxcell Brand: uxcell

85C1-uA Panel DC 0-500uA Current Measuring Tool Analogue Meter

Manufacturer: uxcell Brand: uxcell

Description:1.To fix the PCB without tools, easy to install and unload anti-erode, good insulation with long life.2.Ideally suited for PCB packaging and stacking applications, these new spacers/supports come in seven popular styles.3.Used for board-to-board and chassis-to-board requirements, they come in both push-in mount and screw mount versions. 4.Spacers/supports are available in a wide range of spacing heights and will meet almost any PCB packaging need.

Manufacturer: uxcell Brand: uxcell

Description: This counter requires No External Power Supply! Widely applied to various electrical caculation in different industries. The panel design with self rest locking make that operate it correctly.

Manufacturer: RioRand Brand: RioRand Model: RRMFLIHTBSA

Feature: Cutting size: 45.5mm x 26.5mm Dimensions: 48mm x 29mm x 21mm Measuring range: DC 0-99.9A Measurement Accuracy: ± (1% +2 digits) (Measure 75mV) Supply voltage: DC 7-30V (2 wires Access) Display: Three 0.56" LED digital tube Display color:Green Refresh rate: about 500ms/ With no current shunt Wiring: POWER: Power supply DC 7-30V, Red: Battry Power + , Black: Shunt- INPUT: Measure Current DC 0 ~ 100A, Red(bigger): Shunt+ , Black(bigger): Shunt- Please refer to the picture above Package Includes: 1x Digital Ammeter

Manufacturer: Signswise

Manufacturer: LotFancy Brand: LotFancy

What Does The Detector Do? This non-contact detector is CE approved and provides fast and accurate result by placing it within a range of 1 cm of the live electric wire. It detects neutral wire and live wire and uses the measurement category CAT III with a sensitivity range of 90-1000 VAC. Practical And Durable Design And Small Like A Pen! The electrical circuit tracer got a built-in flashlight, the durable plastic construction will ensure you that you'll keep it for a lifetime. With a pocket clip to carry it around easy. Weight about 1.2 Oz (without the battery) and the length is about 5.7 inch (14.5cm). Easy to use! By pressing the power button, the tip will light up and you will hear a notification sound which means the detector is ready to use, after placing the detector within a range of 1 cm of the live wire, you will get a quick and accurate result, also the higher the voltage is, the higher the frequency of the flash and notification sound will be. For your convenience in illuminating the workspace, by pressing the power button repeatedly you can switch the light of the tip on or off. Press and hold the power button for 2 seconds, a notification sound will be heard twice and the detector turns off. Please carry out a function test before each usage of the detector by using it on a good known circuit to ensure the tester is functional working. If the light or buzzer is faint, make sure to replace the batteries. Features The battery lifetime is about 1.5 years' standby usage and about 6 hours continuous usage. Auto switch off to conserve battery life Package Includes 1 x Non-Contact Detector Pen

Manufacturer: BeGrit Brand: BeGrit Model: SW-8431 Color: Yellow with Gray

The BeGrit Non-Contact Voltage Tester applicable for electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Non-contact test. Breakpoint detect. Test range: 90V-1000V AC. Power supply: 2 x 1.5V AAA battery (Battery Not Included) Product size: 5.83 x 0.67 x 1 inches Product weight: about 0.8oz (without battery) Package includes: 1 * BeGrit Non-Contact Voltage Tester (Battery Not Included) How to use: 1. Install the battery, press the switch in the middle. Green LED of tester tip lights, tester is ready to work. Press the switch again, LED is on; press one more time, LED is off. Press for two seconds, tester sounds DD, then turn off. When no electric field signal is detected, tester is with green LED, it will automatically turn off in 5 minutes. 2. When detect voltage, tester tip sounds with red LED; when electric field becomes stronger, tester is with faster sound. Even the zero line and wire line are close, it is easy to distinguish. 3. Detect radiation intensity of electric field. When detect radiation, tester tip LED changes from green to red, and sounds 4. Breakpoint detect: two sides of the breakpoint have different radiation intensity, the difference can make tester emit different frequency sound. With obvious sound difference, user can find the breakpoint location. (Prerequisite: the line with breakpoint must be located on wire line, test along the surface of the line.) Instrument maintenance: The tester is with high resistance and safe insulation. Keep it dry and clean. Replace battery when LED light is not on; Take out battery for long time use.

Manufacturer: Royal Vintage Spare Brand: Royal Vintage Spare

Amp meter. It has + and - sign on it. It has back light bulb in it and have printed royal enfield logo on it. It can be fitted to all models of royal enfield except thunderbird, machismo and 5 speed models.

Manufacturer: RITTAL Brand: Rittal Model: SV 3455.500

Rittal Sv 3455.500Conductor Connectoin Clamp For E-Cu 10Mm