|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $20.65 1% OFF
Manufacturer: GEREE
Brand: GEREE
Color: USB car charger with voltmeter
Manufacturer: GEREE
Brand: GEREE
Color: USB car charger with voltmeter
|
Product Description Features: Waterproof dustproof material can be used for the interior and exterior application. Can be installed vertically, horizontally or underneath the dash, or any flat surface. Optimised for iPad, iPhone & iPod - fast charging at full speed (2.1Amps for iPad, 1Amp for iPhone/iPod). Widely used with electric equipment for power supply: Vehicle,GPS, mobile phone, camera, mp3 . Apply to all USB charging mobile phones or other electronic products. Run multiple accessories at one time, very convenient and easy to use. Item Specification: Color: Black Material: Nylon+Metal Install Hole: 29mm USB Power Socket Size: About 50x36.5mm Voltmeter Size:about 36x15mm Panel Size: About 105x45x55mm Cautions: CANNOT SMOKE!!! Only use on voltage specificed. Do not operate this device while driving. This product is for 12/32V vehicles only. Check maximum voltage on devices to charged in advance. Always cover outlets when noy in use to aviod dust and water entering. Voltmeter Specifications: Material:Environmental Protection Plastic Power Supply: DC12-24V Measuring range: 6-30V Measurement accuracy: ±0.1% Color: Blue Operating temperature: -10°C to 65°C Outer diameter:36 mm Thread diameter:29 mm Thickness:15 mm Package Included: 1 X 12-24V Dual USB Socket Mount Car Charger Adapter+LED Digital Display Voltmeter 4 X Insulated Terminals 4 X Screws
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $20.95 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP880
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP880
Converts a BNC scope lead to a dual banana plug for connection to a DMM. Required when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110s, to a DMM. Allows for hands-free testing in controlled voltage environments 500V RMS maximum. Banana plug is nickel-plated, beryllium copper for low contact resistance. The BNC shell is plated for tarnish resistance. 122 degree F maximum operating temperature.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $20.95 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP880
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP880
Converts a BNC scope lead to a dual banana plug for connection to a DMM. Required when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110s, to a DMM. Allows for hands-free testing in controlled voltage environments 500V RMS maximum. Banana plug is nickel-plated, beryllium copper for low contact resistance. The BNC shell is plated for tarnish resistance. 122 degree F maximum operating temperature.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $20.99
Manufacturer: SMAKN®
Brand: SMAKN
Manufacturer: SMAKN®
Brand: SMAKN
Product Name : Shunt Resistor;
Material : Metal
Model : FC-1;
Color : Gold Tone
Current : 1000A;
Voltage Drop : 75mV
Dimension : 97 x 40 x 14mm / 3.82" x 1.57" x 0.55"(L*W*T);
Net Weight : 362g
Package Content : 1 x Shunt Resistor
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $21.52 1% OFF
Manufacturer: TENMA
Brand: Tenma
Model: 76-109-TENMA
Manufacturer: TENMA
Brand: Tenma
Model: 76-109-TENMA
TENMA 76-109 TEST PROBE, OSCILLOSCOPE
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $21.90 13% OFF
Brand: SmartWool
Color: Deep Navy Heather
Brand: SmartWool
Color: Deep Navy Heather
Techno Tango Knee High, Deep Navy Heather, Medium
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $21.98 25% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: PR 33A
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: PR 33A
BK Precision PR 33 A has 15/90MHz Bandwidth, X1/X10 Attenuation, 48" (1.2m) Cable length. BK Precision PR 33 A includes a full accessory kit with a Sprung Hook, Replacement Tip and BNC Adapter, IEC61010-2-031.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $22.00 34% OFF
Manufacturer: eversame
Brand: eversame
Color: Black
Manufacturer: eversame
Brand: eversame
Color: Black
|
Eversame Power Meter Tester -Each Power Meter tester from Eversame will be strictly tested by our QC Department, to prove the importance we set on quality. -Perfect for evaluating whether or not the computer, USB wall charger, USB car charger are outputting acceptable voltage and current range for the device you are connecting -This Power Meter Tester can plugs directly into any USB socket or cable, which displays on the screen the voltage, current and capacity -It provides you a rough estimate of the capacity of the device you are charging Specification Input Voltage: 3V-30V Input Current: 0-5.1A Accuracy: +/- 1% Display: LED, show voltage and current simultaneously Maximum Capacity Value: 99999 mAh Tester three dimensional size: 60*24*14mm Operation Introduction (1). The short press is the interface switch, and long press is battery capacity and other data reset; (2). In the main interface, five-press is the setting of automatic power outages and timing turn-off(Five-press in the main interface, the character in the lower right corner of the display stars flashing, choose three settings of 'AO.. / OFF / 1-24H' by clicking or double-clicking, and when the flashing stops, it means the system saves the current settings automatically); (3). Six-press is Chinese/English interface conversion. Warm Tips -This power meter tester may not support fast charging for some type of smartphones and devices. -If any tester you bought from Eversame can't display the correct parameters while testing your devices, please feel free to contact us firstly and we will provide quick respond and offer you good solution. Package Included 1 x Current Voltage Test Meter Easy-To-Reach Support Every product includes one year hassle-free guarantee with excellent after-sale service
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $22.36 1% OFF
Manufacturer: CR Magnetics
Brand: CR Magnetics
Manufacturer: CR Magnetics
Brand: CR Magnetics
This CR Magnetics CR45 series current indicator combines a solid-core current transformer and an LED indicator, and is suitable for use in industrial automation systems. The indicator has a 2.0 amp turn-on threshold, is self-powered for quick installation, and has a thermoplastic housing. This current transformer is suitable for sensing alternating current (AC) loads.SpecificationsFrequency Range50-1,000 HzMaximum input current100 AACInsulation Voltage600 VACOperating Temperature-10 C to 85 CCR Magnetics manufactures electrical sensors, indicators, and displays. The company, founded in 2004, is headquartered in Saint Louis, MO.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $22.99 38% OFF
Manufacturer: Jellas
Brand: Jellas
Model: JL-VA-01
Color: Orange
Manufacturer: Jellas
Brand: Jellas
Model: JL-VA-01
Color: Orange
|
Jellas Voltage Tester is a non-contact voltage tester with an integrated torch.Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Manual: Carry out a function test before use by using the tester on a known good circuit to ensure correct operation. The LED will illuminate and the buzzer will sound. Press LED button to turn on tester ,with a drop of sound,green LED will light. Press the button again to open flashlight;when press one more, flashlight is off. Press for one second to turn off tester. When detect voltage, tester tip sounds with red LED; when electric field becomes stronger, tester is with faster sound. Even the zero line and wire line are close, user can easy to distinguish by sound and light alarm. Breakpoint detect: two sides of the breakpoint have different radiation intensity, the difference can make tester emit different frequency sound. With obvious sound difference, user can find the breakpoint location. (Prerequisite: the line with breakpoint must be located on wire line, test along the surface of the line.) When no electric field signal is detected, tester is with green LED, it will automatically turn off in 5 minutes. Tester is auto power off to save power, with low battery. Warning: Never use circuits over 1000V AC Test voltage range 90-1000v AC Specification: Working voltage:2*1.5V AAA battery Environmnet temperature& humidity:10~50℃,
|
|