Electrical Testing - Page 154

Manufacturer: UNI-T Brand: UTD2052CEX

1、Dual analog channels width range 1mV/div~20V/div; 2、7 inches widescreen LCD displays; 3、The new interface style; 4、Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; 5、USB drive system software upgrade; 6、Storage of waveforms setups and interfaces waveforms and setups reproduction; 7、Automatic measurement of 32 waveform parameters; 8、Unique waveform recording and replay function; 9、Multilingual menu displays. Specification:UTD2052CEX Channels:2 Bandwidth:50MHz Sample Rate:1Gs/s Rise Time:≤7ns Memory Depth:25kpts Waveform Acquisition Rate:≥2000wfms/s Vertical Sensitivity(V/div):1mV/div~20V/div Timebase Range(s/div):2ns/div~50s/div Storage:Setup,Wave,Bitmap Trigger Modes:Edge, Pluse, Video,Slope,Alternate Interface:USB OTG General Characteristic Power:100-240VAC, 45-440Hz Display:7 Inches 64K Color TFT LCD, 800×480 Product Color:White and Gray Product Net Weight:2.2 Kg Product Size (W×H×D):306mm ×147mm × 122mm Standard Accessories:Probe×2 (1×,10× switchable), Power Cord , USB Cable, PC Software CD

Manufacturer: Virtins Technology Brand: Virtins Technology

1. Package Contents: (1)VT DSO-2820 unit with a hardware activated Multi-Instrument Standard software license. (2)2 × 100MHz Oscilloscope Probe P6100 with two switchable positions: × 1, × 10. (3)1m Signal Generator Test Lead. (4)1.5m USB cable. (5)CD (contains the copy-protected Multi-Instrument software). 2. Applications: (1) Ordinary oscilloscope, spectrum analyzer and signal generator functions, all of which work simultaneously. (2) DUT (Device Under Test) analysis such as frequency response. (3) High resolution and low noises at lower sampling rates, 12 voltage ranges from full scale +/-10mV to +/-50V, and support of sensor calibration make it suitable to work as a data acquisition device. (4) Signal Recording and Replaying.....

Manufacturer: Virtins Technology Brand: Virtins Technology

1. Package Contents: (1)VT DSO-2820 unit with a hardware activated Multi-Instrument Standard software license. (2)2 × 100MHz Oscilloscope Probe P6100 with two switchable positions: × 1, × 10. (3)1m Signal Generator Test Lead. (4)1.5m USB cable. (5)CD (contains the copy-protected Multi-Instrument software). 2. Applications: (1) Ordinary oscilloscope, spectrum analyzer and signal generator functions, all of which work simultaneously. (2) DUT (Device Under Test) analysis such as frequency response. (3) High resolution and low noises at lower sampling rates, 12 voltage ranges from full scale +/-10mV to +/-50V, and support of sensor calibration make it suitable to work as a data acquisition device. (4) Signal Recording and Replaying.....

Manufacturer: Yokogawa Electric Corporation Brand: Yokogawa Model: MY10-04

The Yokogawa analog megohmmeter is an insulation tester with a single test voltage for measuring insulation resistance to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures AC voltage and lights an LED to indicate that a circuit is live. When measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The meter has a battery voltage check that indicates the condition of the batteries. It is rated for category (CAT) III installations, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a line probe, an earth probe, a display cover, a shoulder strap, four AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsAvailable test voltage/insulation resistance ranges125V/20MΩ; 250V/50MΩ; 500V/100MΩ; 500V/1,000MΩ; 1,000V/2,000MΩMaximum AC voltage measured250V for 125V/20MΩ model; 300V for 250V/50MΩ model; 500V for other modelsInstallation categoryCAT IIIStandards metEN safety standards 61010-1:1993 and 61010-2-031:1995; CE markingPower(4) AA batteriesWeight500gDimensions (H x W x D)*103 x 125 x 53mm*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Megohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degraded insulation and improper circuit connections in equipment, wiring, and power supplies. Resistance is an indicator of the overa...

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1731C

Now you can measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. With the auto identification, Ai which conveniently displays component type and detailed component analysis such as Z, ESR, DCR, you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.

Manufacturer: KKmoon Brand: KKmoon

Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus Diagnosis/Performer/Startup&Charge), USB 2.0 interface plug and play, and need no extra power supply, Support tablet PC, Support WIN10/ WIN8/WIN7 etc. Free software upgrading constantly, higher cost performance, Support USBXI, easy to operate. 4 isolated channels oscilloscope, 1GSa/s real time sampling rate, 2mV-10V/DIV high input sensitivity and large input range, 70MHz/100MHz/200MHz/250MHz high bandwidth, small size, easy to carry. Dynamic cursor tracking, waveform record and replay function.Specifications: Brand Name: Hantek Material: Aluminium Alloy + Plastic Model: Hantek6074BE / Hantek6104BE / Hantek6204BE / Hantek6254BE (Optional) Bandwidth: 70MHz / 100MHz / 200MHz / 250MHz (Correspondingly Optional) Oscilloscope Probe Model: PP-90 / PP-150 / PP-200 / PP-250 (Corresponding) Item Size: Approx. 210 * 125 * 37mm / 8.3 * 4.9 * 1.5in Item Weight: Approx. 453g / 16.0oz Package Size: Approx. 25 * 18.5 * 11cm / 9.8 * 7.3 * 4.3in Package Weight: Approx. 1310g / 46.2ozNote: Hantek 6074BE/6104BE/6204BE/6254BE Oscilloscope is for 3 years Warranty！ Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.Package List: 1 * Car Diagnostic Oscilloscope 1 * Large Dolphin/Gator Clip 1 * Multimeter Probe 1 * Auto High-Pressure Ignition 1 * Auto Test Cable 1 * Acupuncture Probe Set 3 * Dolphin/Gator Clip Cable 1 * USB Power Line 1 * Upper-computer Software CD with User Manual

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED FLAT

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-179/EDA2 Color: 6 Piece Industrial Electronics DMM Combo Kit

Full featured DMM with advanced electronic troubleshooting functions plus probes and hooks all packed in a sleek, durable carrying case. Kit Includes: Fluke 179 true RMS digital multimeter with backlight, Fluke TL224 silicone test leads, Fluke Tl910 electronic test probes with replacement tips, Fluke AC280 heavy duty hook clips, Fluke 80bk a integrated temperature probe, Fluke C35 durable carrying case, The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL1550EXT

Replacement test lead set for the Fluke 1550B/1550C/1555 MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Test leads extend to 25'. Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

Manufacturer: Accuenergy Brand: Acuvim L Model: Acuvim-CL-D-60-5A-P2 Color: LCD Display

Versatile & intelligent multifunction power and energy meter with 0.5% accuracy and built-in Modbus-RTU via RS485, LCD display. The Acuvim-CL is ideal for monitoring energy data from panel. All data can be read directly from LCD display and Modbus-RTU communication protocol. The Acuvim-CL is UL and CE approved, and comes with a class-leading 5 year warranty.