Electrical Testing - Page 18

Manufacturer: Smile&Satisfaction Brand: GHB Color: Red

Product Description:GHB Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact.With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses. Specification: 1.Maximum voltage including transient overvoltage between any terminals and grounding: 500V rms 2.Display: Maximum display 1999 3.Auto polarity Display 4.Overloading: Display OL -OL 5.Low Battery Indication 6.Measurement Speed: Updates 3 times/second 7.Measurement Deviation: When the conductor being measured is not placed in a correct position during AC current measurement, it will cause ±1% reading deviation. 8.Drop Test； 1 meter drop test passed 9.Max. Jaw Opening: 28mm diameter 10.Text Max: current conductor size: 26mm diameter 11.Power: 2 pcs of 1.5V battery (AAA) 12.Battery life: Typically 150 hours ( alkaline battery) 13.Dimensions (H x W x L) ：1.2x 3x 8.2 inches 14.Weight: Approximate 260g (battery included) Package: 1 x English Operating Manual 2 x Test Lead 1 xPoint Contact Temperature Probe (202only) 2 x1.5V Battery (AAA)

Manufacturer: Iztor Brand: iztor Color: Ammeter

Measure range: 1-10 A Reverse connect protection function, won't burn when Lines connect instead Used for testing equipment working current

Manufacturer: Fluke Brand: Fluke Model: 80PJ-1

FLUKE 80PJ-1 TEST PROBE

Manufacturer: Test Products International, Inc Brand: TPI Model: GK18M

Wide temperature range used in many digital thermometers. Identified by a yellow connector. Sub-Mini Connector: This is an industry standard connector type allowing TPI probes to be used in any thermocouple thermometer using this type of connector. Sub-mini connectors are quick and easy to use, simply push in and out. A wide variety of economical probes are available with sub-mini connectors, enhancing versatility and affordability of the temperature tester. Applications: measure air temperatures in duct work. Measure air temperature coming from diffusers while trouble-shooting heating and air conditioning systems. Measure flame temperatures to trouble-shoot industrial heating applications. Calibrate thermostats using an ambient air probe. Caged exposed junction for fast response in air applications. RoHS compliant. Caged air probe is rigid. Cage provides maximum protection for the sensing element. Air probe respond significantly faster than penetration or contact probes in air. Temperature range: -40 to 586 Degree F. Probe tip: 48. Made of braided stainless steel material. 39-25/64" Lead length. RoHS Compliant.

Manufacturer: Show Chrome Accessories Brand: Show Chrome Accessories Model: 52-647 Color: Chrome

This accent piece is a perfect way to dress up your instrument panel. Simply snap it over the existing stock charcoal plastic gauge area. Attaches with double sided tape providing durable adhesion in all elements. Fits Honda GL2001-2005.

Manufacturer: FLUKE CORPORATION Brand: Fluke

Test tweezer clip is specially designed for testing of surface mounted devices (SMDs). Rating: 30 VAC/70 VDC; VRMS; 3A. 48" OAL. Right-Angle DMM Plug

Manufacturer: Dolphin Gauges Brand: Dolphin Gauges

If you have an older model GM transmission and are using the programmable speedo set, don't forget your pulse generator. See the additional information below to see if this is needed for your application.+ Allows modern GM engines to be mated to non-electronically controlled GM automatic transmissions.+ Converts mechanical speed signal into a digital square wave signal, at 128K pulses per mile, for you modern GM "engine computer"/speedometer+ 8000 pulses per mileTransmission types and required Pulse Generator:Ford:C-4C-6Tremec 5 SpeedAOD:All these require Ford Pulse except some C-6 (Have screw on cables) therefore GM Pulse would applyGM:Turbo 350Turbo 400 (All require GM Pulse)200R4Power Glide700R4 Early Model (Require GM Pulse)--------------700 R4 Late Model (Already built in)4L60E (Already built in)4L80E (Already built in)Chrysler:GM: They will use their existing Speedo Cable as well to screw onto thisMopar Transmission - NAPA'S Part #'s 904 & 727 - Long Cable 615-1666 Short Cable 615-1665

Manufacturer: Fluke Corporation Brand: Fluke Model: 4344675 Color: Red

Fluke PVC Test Lead for 1000V CAT III, Straight Plug, 2m Length, Red ...

Manufacturer: DROK Brand: DROK

Nowadays, the USB port is one of essential access that provides the necessary "lifeblood" (electricity) to charge and re-charge all of our fancy cellphones and gadgets. But most of us rarely know that whether things are going well in the power transfer process or not. Surely, there is a little gizmo that can help us figure out this here! FEATURES: ✓ Can display voltage, current, power, capacity and time(every 2 seconds switching capacity and time) ✓ Highlight intervals, which increases the life of OLED and prevents aging ✓ Can store 10 sets of data ✓ Store data when power off ✓ 20 milliohms sampling ✓ Range: 10V 2.0A ✓ Resolution: 10 mV, 2mA OPERATION INSTRUCTION: • Plug it into mobile hard drives, computers and other equipment to detect electric parameters, compatible with usb1.0, usb2.0, usb3.0. • There is a multifunctional button on its back: short press it, the readouts can be flipped; long press it to switch among 10 sets of memory capacity data. WARM TIPS: Please don't short-circuit the output, or the power devices for USB will be burnt.

Manufacturer: Extech Brand: Extech Model: DA30

View larger Non-Contact AC Current Detector Detects AC Current (200 mA to 1000 amps) through shielded wires, conduit, and metal circuit breaker or junction boxes with audible and visual indication. Additional Features Sensitivity adjustment increases or reduces sensor trigger threshold. CAT III-600-volt, CE approved and UL Listed. Includes Comes with pocket clip, four LR44 button batteries, and user guide. More Extech Instruments to Choose From DVA30View larger Combination Non-Contact AC Voltage and Current Detector The DVA30 is the only two-in-one current/voltage detector designed for electrical testing. It detects AC voltage from 12 volts to 600 volts and AC current from 200mA at 0. 2" distance and at much greater distances for larger current flow up to 1000A. Sensitivity adjustments increase or reduce sensor trigger threshold. Audible and visual indicators show the presence of current or voltage. It can be used to trace concealed wires in walls and floors, identify "hot" wires, and to trace current flow where voltage detection does not work (through shielded wires, conduit, and metal circuit breaker/junction boxes, behind walls, through concrete, or underground). The sensitivity is high enough to trip on low voltage HVAC or similar signal levels. CAT III-600-volt, CE approved and UL Listed. Complete with four LR44 button batteries and pocket clip.