Electrical Testing - Page 180

Manufacturer: TENMA Brand: Tenma

TENMA SPC15329 BANANA PLUG, SOLDER, RED

Manufacturer: Southwire Brand: Southwire Tools & Equipment Model: 58290640 Color: Brown

Southwire 11050N Autoranging Digital Multimeter NCV CAT III 600V UL is a compact multimeter is the perfect fit for the crowded tool bag. Features include a CAT III safety rating, built-in non-contact AC voltage tester, and Capacitance and Temperature functions.

Manufacturer: Greenlee Brand: Greenlee Model: 77M-G

Tone Generator (77M-G) (Clam)

Manufacturer: HARULU Brand: HARULU Color: yellow

Operation: Power On/OFF: Press the power button and release to power on. Press the power button and hold 2 seconds to power off.Measure Method: a. Press the power button to turn on the counter, put the signal source nearby the counter, the measured frequency will be displayed within 1 second. (Sometimes there is a frequency value on the screen already when the counter power on, that is an interference frequency. You should press the power button once after put the signal source nearby the counter, and then the value is measured.) b. If the signal source has a CTCSS tone, the tone will be showed directly below the transmitted frequency display. c. If the signal source has a DCS code, the normal code and the invert code of DCS are simultaneously showed directly below the transmitted frequency display. (The DCS measurement would take one second more time.) d. To measure again, press the power button.Test measurement results: To test the results, press the right M button, the counter will transmit a low level signal with a tone. Your receiver will hear this so you know that the tested frequency and tone is correct.Automatic power off: In the absence of any operating system would power off automatically after 60 seconds.Package Includes: 1 X N-8 Frequency Counter 1 X Antenna 1 X User's Manual

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 80056 Color: Red

Martel Electronics manufactures test and measurement equipment such as calibrators, pressure pumps, and meters. The company, founded in 1987 and headquartered in Derry, NH, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: Thaikits Brand: Thaikits

- Require Power supply 12VAC or 12VDC - 1 Channel - 3 Ranges of Frequency by selector switch 1: 1-100Hz 2: 100-10kHz 3: 10kHz-600kHz NOTE: 20KHz max for TTL output port. Duty cycle cannot be adjust there are 50% - 60% depend on the frequency - 3 signal output port 1: TTL (4.48Vrms) 2: Square (10.2Vms) 3. Sine (Vmax = 1Vrms)/ Triagle (Vmax = 1.9Vrms) - 2 Pots on board 1: Adjust an amplitude of Sine / Triagle [ Amplitude of square and TTL port can not be adjust ] 2: Adjust the frequency - PCB size : 5.2" x 2.42" - Comes with the schematic and part list

Manufacturer: BARTOL RESEARCH Brand: BARTOL RESEARCH

The Mag-Probe A non-contact instrument that tests AC or DC relay and solenoid operation. Sensitive enough to detect the magnetic field generated by tiny "ice cube" relays. This magnetic sensing probe is a completely safe, non-contact probe which allows troubleshooting without schematics or special training while eliminating time consuming and cumbersome hookups. It detects residual magnetism, transient current pulses ("glitches"), in AC and DC-powered solenoids, relays, or any device using a coil. You can safely and easily identify and separate electrical from mechanical problems accurately and inexpensively. Just place the probe tip close to the coil in the device. If the LED is on, the device is energized; if the LED is off, the device is de-energized. The Mag-Probe is constructed of non-conductive materials to reduce the risk of shorting live circuits. It also uses a small internal lithium battery (included) and can be used in situations where lead content is a concern 3-1/2" long. Wt: 1 oz. (USA) High Sensitivity Model, for all solenoids, relays, and reed relays.

Manufacturer: JAIN SCIENTIFIC SUPPLIERS Brand: JAINCO Model: 1349

AC/DC with shocking coil. A premium product by JAINCOLAB. India.

Manufacturer: Balance World Inc Brand: Balance world

We offer a complete, DIY tdcs kit with a regulated 2 milliamps or 2/1,000 (+/- 10%) of an amp, power supply cord. Kit updated on 03/21/16 to include material to make electrode placement cap. The kit includes: 1 regulated, 2mA Power Supply 2 two inch Long Lasting, Wet/Dry, Silver Cloth foam backed Electrodes 1 one inch Long Lasting, Silver Cloth electrode 2 1.25 inch self sticking electrodes 1 ear clip electrode 1 splitter wire 1 Cap-Kit (3m of Cord and 16 snaps. Cap must be cut to size and assembled) 1 storage bag Not intended for medical use! D-I-Y means-It is your responsibility and liability to determine why and how you will use this kit. 9v battery NOT includedx

Manufacturer: Tekpower Brand: Tekpower Model: DT6930 Color: Tekpower TP6930

The Tekpower DT6930 is a professional true RMS digital AC/DC Clamp meter, it can measure AC/DC voltage, AC/DC current up to 1000A, resistance, frequency, capacitance, temperature as well as diode check and continuity test. It has many nice features as listed below. 　 Specifications: Display: 4,000 counts Auto/Manual Range AC True RMS AC Voltage: 40V/400V ± 1.0 % 40mV/400 mV/4V/600V ± 1.5% DC Voltage: 400mV/4V/40/400V ± 0.5 % 40mV/600V ± 0.8% AC Current: 400A ± 2.0 % 1000A ± 2.5% DC Current: 400A± 2.0 % 1000A ± 2.5% Resistance: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ ± 1.0% 40MΩ ± 2.0% Capacitance: 40nF ± 3.0 % 400nF/4μF/40μF ± 2.5% 400μF ± 5.0%, 4mF ± 20.0% Frequency: 10Hz-10MHz ± 1.0 % Temperature (C/F): -50℃/-58℉---150℃/302℉ ± 3℃+1℃/5℉+2 150℃/302℉---700℃/1292℉ ± 3℃+1℃/5℉+2℉ Diodes Test Continuity buzzer Duty Cycle: 0.1% -99.9% Features: Auto/Manual Range AC True RMS Flexible Auto Power Off MAX/MIN Data Hold Back light Accessories: Carrying pouch K-type Thermo probe Test leads User Manual